124 research outputs found
Deformation Quantization of a Certain Type of Open Systems
We give an approach to open quantum systems based on formal deformation
quantization. It is shown that classical open systems of a certain type can be
systematically quantized into quantum open systems preserving the complete
positivity of the open time evolution. The usual example of linearly coupled
harmonic oscillators is discussed.Comment: Major update. Improved main statements. 21 page
Long-term characterisation of the vertical structure of the Saharan Air Layer over the Canary Islands using lidar and radiosonde profiles: implications for radiative and cloud processes over the subtropical Atlantic Ocean
Every year, large-scale African dust outbreaks frequently pass over the Canary Islands (Spain). Here we describe the seasonal evolution of atmospheric aerosol extinction and meteorological vertical profiles on Tenerife over the period 2007–2018 using long-term micropulse lidar (MPL-3) and radiosonde observations. These measurements are used to categorise the different patterns of dust transport over the subtropical North Atlantic and, for the first time, to robustly describe the dust vertical distribution in the Saharan Air Layer (SAL) over this region. Three atmospheric scenarios dominate the aerosol climatology: dust-free (clean) conditions, the Saharan summer scenario (summer-SAL) and the Saharan winter scenario (winter-SAL).
A relatively well-mixed marine boundary layer (MBL) was observed in the case of clean (dust-free) conditions; it was associated with rather constant lidar extinction coefficients (α) below 0.036 km−1 with minimum α (< 0.022 km−1) in the free troposphere (FT). The summer-SAL has been characterised as a dust-laden layer strongly affecting both the MBL (Δα = +48 % relative to clean conditions) and the FT. The summer-SAL appears as a well-stratified layer, relatively dry at lower levels (
% at the SAL’s base, where r is the water vapour mixing ratio) but more humid at higher levels compared with clean FT conditions (
% at 5.3 km), with a peak of α> 0.066 km−1 at ∼ 2.5 km. Desert dust is present up to ∼ 6.0 km, the SAL top based on the altitude of SAL's temperature inversion. In the winter-SAL scenario, the dust layer is confined to lower levels below 2 km altitude. This layer is characterised by a dry anomaly at lower levels (Δr∼ −38 % in comparison to the clean scenario) and a dust peak at ∼ 1.3 km height. Clean FT conditions were found above 2.3 km.
Our results reveal the important role that both dust and water vapour play in the radiative balance within the summer-SAL and winter-SAL. The dominant dust-induced shortwave (SW) radiative warming in summer (heating rates up to +0.7 K d−1) is found slightly below the dust maximum. However, the dominant contribution of water vapour was observed as a net SW warming observed within the SAL (from 2.1 to 5.7 km) and as a strong cold anomaly near the SAL's top (−0.6 K d−1). The higher water vapour content found to be carried on the summer-SAL, despite being very low, represents a high relative variation in comparison to the very dry clean free troposphere in the subtropics. This relevant aspect should be properly taken into account in atmospheric modelling processes. In the case of the winter-SAL, we observed a dust-induced radiative effect dominated by SW heating (maximum heating of +0.7 K d−1 at 1.5 km, near the dust peak); both dust and atmospheric water vapour impact heating in the atmospheric column. This is the case of the SW heating within the SAL (maximum near the r peak), the dry anomaly at lower levels (Δr∼ −38 % at 1 km) and the thermal cooling (∼ 0.3 K d−1) from the temperature inversion upwards.
Finally, we hypothesise that the SAL can impact heterogeneous ice nucleation processes through the frequent occurrence of mid-level clouds observed near the SAL top at relatively warm temperatures. A dust event that affected Tenerife on August 2015 is simulated using the regional DREAM model to assess the role of dust and water vapour carried within SAL in the ice nucleation processes. The modelling results reproduce the arrival of the dust plume and its extension over the island and confirm the observed relationship between the summer-SAL conditions and the formation of mid- and high-level clouds.The long-term meteorological sounding program has been supported by regular funds from AEMET. The long-term MPLNet program in Tenerife has been financed through R&D budgets from INTA and AEMET. AERONET sun photometers at Izaña have been calibrated within the AERONET Europe TNA, supported by the European Community Research Infrastructure Action under the FP7 ACTRIS (grant agreement no. 262254). This research has received support from the Institute of Physics Belgrade, through the grant by the Ministry of Education, Science, and Technological Development of the Republic of Serbia.Peer Reviewed"Article signat per 13 autors/es: África Barreto, Emilio Cuevas, Rosa D. García, Judit Carrillo, Joseph M. Prospero, Luka Ilić, Sara Basart, Alberto J. Berjón, Carlos L. Marrero, Yballa Hernández, Juan José Bustos, Slobodan Ničković, and Margarita Yela"Postprint (published version
An Assessment of the Efficiency of Dust Regional Modelling to Predict Saharan Dust Transport Episodes
Aerosol levels at Mediterranean Basin are significantly affected by desert dust that is eroded in North Africa and is transported northwards. This study aims to assess the performance of the Dust REgional Atmospheric Model (BSC-DREAM8b) in the prediction of dust outbreaks near the surface in Eastern Mediterranean. For this purpose, model PM10 predictions covering a 7-year period and PM10 observations at five surface monitoring sites in Greece are used. A quantitative criterion is set to select the significant dust outbreaks defined as those when the predicted PM10 surface concentration exceeds 12 μg/m3. The analysis reveals that significant dust transport is usually observed for 1–3 consecutive days. Dust outbreak seasons are spring and summer, while some events are also forecasted in autumn. The seasonal variability of dust transport events is different at Finokalia, where the majority of events are observed in spring and winter. Dust contributes by 19–25% to the near surface observed PM10 levels, which can be increased to more than 50 μg/m3 during dust outbreaks, inducing violations of the air quality standards. Dust regional modeling can be regarded as a useful tool for air quality managers when assessing compliance with air quality limit values
Investigating the quality of modeled aerosol profiles based on combined lidar and sunphotometer data
In this study we present an evaluation of the Comprehensive Air Quality Model with extensions (CAMx) for Thessaloniki using radiometric and lidar data. The aerosol mass concentration profiles of CAMx are compared against the PM2.5 and PM2. 5−10 concentration profiles retrieved by the Lidar-Radiometer Inversion Code (LIRIC). The CAMx model and the LIRIC algorithm results were compared in terms of mean mass concentration profiles, center of mass and integrated mass concentration in the boundary layer and the free troposphere. The mean mass concentration comparison resulted in profiles within the same order of magnitude and similar vertical structure for the PM2. 5 particles. The mean centers of mass values are also close, with a mean bias of 0.57 km. On the opposite side, there are larger differences for the PM2. 5−10 mode, both in the boundary layer and in the free troposphere. In order to grasp the reasons behind the discrepancies, we investigate the effect of aerosol sources that are not properly included in the model's emission inventory and in the boundary conditions such as the wildfires and the desert dust component. The identification of the cases that are affected by wildfires is performed using wind backward trajectories from the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model in conjunction with satellite fire pixel data from MODerate-resolution Imaging Spectroradiometer (MODIS) Terra and Aqua global monthly fire location product MCD14ML. By removing those cases the correlation coefficient improves from 0.69 to 0.87 for the PM2. 5 integrated mass in the boundary layer and from 0.72 to 0.89 in the free troposphere. The PM2.5 center of mass fractional bias also decreases to 0.38 km. Concerning the analysis of the desert dust component, the simulations from the Dust Regional Atmospheric Model (BSC-DREAM8b) were deployed. When only the Saharan dust cases are taken into account, BSC-DREAM8b generally outperforms CAMx when compared with LIRIC, achieving a correlation of 0.91 and a mean bias of −29.1 % for the integrated mass in the free troposphere and a correlation of 0.57 for the center of mass. CAMx, on the other hand, underestimates the integrated mass in the free troposphere. Consequently, the accuracy of CAMx is limited concerning the transported Saharan dust cases. We conclude that the performance of CAMx appears to be best for the PM2.5 particles, both in the boundary layer and in the free troposphere. Sources of particles not properly taken into account by the model are confirmed to negatively affect its performance, especially for the PM2. 5−10 particles.The authors would like to acknowledge the
EU projects MACC-III (Monitoring Atmospheric Composition and Climate – III, grant agreement no. 633080) and MACC-II project
(Monitoring Atmospheric Composition and Climate – Interim Implementation, grant agreement no. 283576). The simulated
results presented in this research paper have been produced using the EGI and HellasGrid infrastructures. The ACTRIS-2 project
from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 654109 is gratefully
acknowledged. The authors would also like to acknowledge the support provided by the Scientific Computing Center at Aristotle
University of Thessaloniki throughout the progress of the work on air quality forecasting. BSC-DREAM8b simulations were performed
on the Mare Nostrum supercomputer hosted by Barcelona Supercomputing Center-Centro Nacional de Supercomputacion (BSC-CNS). S. Basart wants to acknowledge the CICYT project (CGL2013-46736). Elina Giannakaki acknowledges the support of the Academy of Finland (project no. 270108).Peer ReviewedPostprint (published version
Space VLBI at Low Frequencies
At sufficiently low frequencies, no ground-based radio array will be able to
produce high resolution images while looking through the ionosphere. A
space-based array will be needed to explore the objects and processes which
dominate the sky at the lowest radio frequencies. An imaging radio
interferometer based on a large number of small, inexpensive satellites would
be able to track solar radio bursts associated with coronal mass ejections out
to the distance of Earth, determine the frequency and duration of early epochs
of nonthermal activity in galaxies, and provide unique information about the
interstellar medium. This would be a "space-space" VLBI mission, as only
baselines between satellites would be used. Angular resolution would be limited
only by interstellar and interplanetary scattering.Comment: To appear in "Astrophysical Phenomena Revealed by Space VLBI", ed. H.
Hirabayashi, P. Edwards, and D. Murphy (ISAS, Japan
Radio source calibration for the VSA and other CMB instruments at around 30 GHz
Accurate calibration of data is essential for the current generation of CMB
experiments. Using data from the Very Small Array (VSA), we describe procedures
which will lead to an accuracy of 1 percent or better for experiments such as
the VSA and CBI. Particular attention is paid to the stability of the receiver
systems, the quality of the site and frequent observations of reference
sources. At 30 GHz the careful correction for atmospheric emission and
absorption is shown to be essential for achieving 1 percent precision. The
sources for which a 1 percent relative flux density calibration was achieved
included Cas A, Cyg A, Tau A and NGC7027 and the planets Venus, Jupiter and
Saturn. A flux density, or brightness temperature in the case of the planets,
was derived at 33 GHz relative to Jupiter which was adopted as the fundamental
calibrator. A spectral index at ~30 GHz is given for each. Cas A,Tau A, NGC7027
and Venus were examined for variability. Cas A was found to be decreasing at
percent per year over the period March 2001 to August 2004.
In the same period Tau A was decreasing at percent per year. A
survey of the published data showed that the planetary nebula NGC7027 decreased
at percent per year over the period 1967 to 2003. Venus showed
an insignificant ( percent) variation with Venusian illumination.
The integrated polarization of Tau A at 33 GHz was found to be
percent at pa .}Comment: 13 pages, 15 figures, submitted to MNRA
an inclusive view of saharan dust advections to italy and the central mediterranean
Abstract We address observations of physical and chemical properties of Saharan dust advections (SDA) as observed in the Central Mediterranean basin, within the framework of the LIFE+10, DIAPASON project ( www.diapason-life.eu ). DIAPASON aimed at the definition of best practices and tools to detect and evaluate the contribution of Saharan dust to ground particulate matter (PM) loads. Polarization-sensitive, automated lidar-ceilometers (PLC) are one of the tools prototyped and used in the Rome area to reach this goal. The results presented in this study focus on: 1) the effectiveness of various observational tools at detecting and characterizing atmospheric dust plumes, and 2) processes and properties of Saharan dust advections reaching the central Mediterranean region. In this respect, the combination of numerical model forecasts and time-resolved (at least hourly) PLC or chemical observations was found to constitute an efficient way to predict and confirm the presence of Saharan dust. In the period 2011–2014, Saharan dust advections were observed to reach over Rome on about 32% of the days. In some 70% of these days the dust reached the ground in dry conditions, while 30% of advection days involved wet deposition. Dry (wet) deposition was found to maximize (minimize) in summer. The northern Sahara between Algeria and Tunisia (Grand Erg Oriental), was confirmed as the most frequent region of origin of the dust mobilized towards central Italy. Secondary source regions include northern Morocco and Libya. On a statistical basis, Saharan advections to Rome were preceded by increasing atmospheric pressure and stability. These conditions were found to favor the accumulation of aerosols related to local emission sources before the SDA reached the ground. Meteorology (precipitation and turbulence in primis) resulted to be an important modulator of PM concentrations during SDAs. Magnitude and timing of these factors should be well considered to correctly evaluate the dust share in PM loads or the related health effects. Saharan advections observed during DIAPASON affected particle concentrations down to diameters of about 0.6–1 μm, with number concentrations peaking at the 2.5 μm diameter range. These advections were associated with a significant increase in Si-rich particles containing a non-negligible fraction of water. Rainfall was observed to preferentially remove dust particles larger than 2 μm, causing a significant depletion in the Ca-rich fraction with respect to the Si-rich one. The increase in PLC depolarization ratios above 5%, as well as the hourly PIXE records of the Si/Ca ratio increasing above 1 were found to represent good markers for the actual presence of Saharan dust particulate matter, when Saharan advection conditions are occurring
Phase-space formulation of quantum mechanics and quantum state reconstruction for physical systems with Lie-group symmetries
We present a detailed discussion of a general theory of phase-space
distributions, introduced recently by the authors [J. Phys. A {\bf 31}, L9
(1998)]. This theory provides a unified phase-space formulation of quantum
mechanics for physical systems possessing Lie-group symmetries. The concept of
generalized coherent states and the method of harmonic analysis are used to
construct explicitly a family of phase-space functions which are postulated to
satisfy the Stratonovich-Weyl correspondence with a generalized traciality
condition. The symbol calculus for the phase-space functions is given by means
of the generalized twisted product. The phase-space formalism is used to study
the problem of the reconstruction of quantum states. In particular, we consider
the reconstruction method based on measurements of displaced projectors, which
comprises a number of recently proposed quantum-optical schemes and is also
related to the standard methods of signal processing. A general group-theoretic
description of this method is developed using the technique of harmonic
expansions on the phase space.Comment: REVTeX, 18 pages, no figure
Numerical Prediction of Dust
Covers the whole breadth of mineral dust research, from a scientific perspective Presents interdisciplinary work including results from field campaigns, satellite observations, laboratory studies, computer modelling and theoretical studies Explores the role of dust as a player and recorder of environmental change This volume presents state-of-the-art research about mineral dust, including results from field campaigns, satellite observations, laboratory studies, computer modelling and theoretical studies. Dust research is a new, dynamic and fast-growing area of science and due to its multiple roles in the Earth system, dust has become a fascinating topic for many scientific disciplines. Aspects of dust research covered in this book reach from timescales of minutes (as with dust devils, cloud processes, and radiation) to millennia (as with loess formation and oceanic sediments), making dust both a player and recorder of environmental change. The book is structured in four main parts that explore characteristics of dust, the global dust cycle, impacts of dust on the Earth system, and dust as a climate indicator. The chapters in these parts provide a comprehensive, detailed overview of this highly interdisciplinary subject. The contributions presented here cover dust from source to sink and describe all the processes dust particles undergo while travelling through the atmosphere. Chapters explore how dust is lifted and transported, how it affects radiation, clouds, regional circulations, precipitation and chemical processes in the atmosphere, and how it deteriorates air quality. The book explores how dust is removed from the atmosphere by gravitational settling, turbulence or precipitation, how iron contained in dust fertilizes terrestrial and marine ecosystems, and about the role that dust plays in human health. We learn how dust is observed, simulated using computer models and forecast. The book also details the role of dust deposits for climate reconstructions. Scientific observations and results are presented, along with numerous illustrations. This work has an interdisciplinary appeal and will engage scholars in geology, geography, chemistry, meteorology and physics, amongst others with an interest in the Earth system and environmental change
Recommended from our members
A methodology for investigating dust model performance using synergistic EARLINET/AERONET dust concentration retrievals
Systematic measurements of dust concentration profiles at a continental scale were recently made possible by the development of synergistic retrieval algorithms using combined lidar and sun photometer data and the establishment of robust remote-sensing networks in the framework of Aerosols, Clouds, and Trace gases Research InfraStructure Network (ACTRIS)/European Aerosol Research Lidar Network (EARLINET). We present a methodology for using these capabilities as a tool for examining the performance of dust transport models. The methodology includes considerations for the selection of a suitable data set and appropriate metrics for the exploration of the results. The approach is demonstrated for four regional dust transport models (BSC-DREAM8b v2, NMMB/BSC-DUST, DREAMABOL, DREAM8-NMME-MACC) using dust observations performed at 10 ACTRIS/EARLINET stations. The observations, which include coincident multi-wavelength lidar and sun photometer measurements, were processed with the Lidar-Radiometer Inversion Code (LIRIC) to retrieve aerosol concentration profiles. The methodology proposed here shows advantages when compared to traditional evaluation techniques that utilize separately the available measurements such as separating the contribution of dust from other aerosol types on the lidar profiles and avoiding model assumptions related to the conversion of concentration fields to aerosol extinction values. When compared to LIRIC retrievals, the simulated dust vertical structures were found to be in good agreement for all models with correlation values between 0.5 and 0.7 in the 1–6 km range, where most dust is typically observed. The absolute dust concentration was typically underestimated with mean bias values of -40 to -20 μg m−3 at 2 km, the altitude of maximum mean concentration. The reported differences among the models found in this comparison indicate the benefit of the systematic use of the proposed approach in future dust model evaluation studies
- …