Mixed sand–mud bedforms produced by transient turbulent flows in the fringe of submarine fans: Indicators of flow transformation

The fringe of fine‐grained deep‐marine systems often exhibits complex sedimentary facies and facies associations, because the presence of clay promotes the development of transient turbulent flows with complex depositional properties. Relatively little is known about the variation of current‐induced sedimentary structures found within these facies. This study provides the first comprehensive description and interpretation of mixed sandstone–mudstone bedforms observed in the fringe of the mud‐rich submarine fan that makes up the Aberystwyth Grits Group and Borth Mudstone Formation (Wales, United Kingdom). Using textural and structural descriptions, 158 bedforms in sediment gravity flow deposits were characterized into three main types: ‘classic’ sandy current ripples, large current ripples and low‐amplitude bed‐waves. The sandy current ripples comprise clean sandstone, with average heights and lengths of 11 mm and 141 mm, respectively. The large current ripples are composed of mixed sandstone–mudstone and possess greater dimensions than the sandy current ripples, with an average height of 19 mm and an average length of 274 mm. The low‐amplitude bed‐waves are long thin bedforms composed commonly of mixed sandstone–mudstone, with an average height and length of 10 mm and 354 mm, respectively. The large current ripples and low‐amplitude bed‐waves are strikingly similar to experimental bedforms produced under decelerating mixed sand–mud flows and are interpreted to form beneath transitional flows with enhanced and attenuated near‐bed turbulence, respectively. From the fringe to the distal fringe of the fan, the dominant bedform type changed from sandy current ripples, via large current ripples, to low‐amplitude bed‐waves, suggesting that the flows changed from turbulent to increasingly turbulence‐modulated. It is proposed that the flow Reynolds number reduced, reflecting this flow transformation, from a combination of constant or decreasing flow height, flow deceleration from sediment deposition, and increasing flow viscosity due to the shear‐thinning nature of clay‐rich suspensions. Large current ripples and low‐amplitude bed‐waves are likely to be common in the fringe of other submarine fans. The presence and spatial trends in mixed sand–mud bedform types may be an important tool in interpreting fan fringe environments

Streamwise turbulence modulation in non-uniform open-channel clay suspension flows

Cohesive sediment particles are ubiquitous in environmental flows. The cohesive properties of clay promote the formation of clay flocs and gels and relatively small suspended clay concentrations can enhance or suppress turbulence in a flow. Furthermore, flows are naturally non-uniform, varying in space and time, yet the dynamics of non-uniform open-channel clay suspension flows is poorly understood. For the first time, the adaptation time and length scales of non-uniform clay suspension flows were quantified using novel experiments with spatially varying but temporally uniform flow. Different levels of turbulence enhancement and attenuation were identified as the flow decelerates or accelerates. Results highlight that decelerating clay suspension flows crucially have a longer adaptation time than accelerating clay suspension flows. This is explained by the longer timescale required for the formation of bonds between cohesive particles in turbulence attenuated flows after deceleration than the rapid breakdown of bonds in turbulent flows after acceleration of clay suspension flows. This hysteresis is more pronounced for higher concentration decelerating flows that pass through a larger variety of clay flow types of turbulence enhancement and attenuation. These different adaptation time scales and associated clay flow type transitions are likely to affect clay flow dynamics in a variety of fluvial and submarine settings

Dynamics and Deposition of Sediment-Bearing Multi- Pulsed Flows and Geological Implication

Copyright © 2019, SEPM (Society for Sedimentary Geology) Previous studies on dilute, multi-pulsed, subaqueous saline flows have demonstrated that pulses will inevitably advect forwards to merge with the flow front. On the assumption that pulse merging occurs in natural-scale turbidity currents, it was suggested that multi-pulsed turbidites that display vertical cycles of coarsening and fining would transition laterally to single-pulsed, normally graded turbidites beyond the point of pulse merging. In this study, experiments of dilute, single- and multi-pulsed sediment-bearing flows (turbidity currents) are conducted to test the linkages between downstream flow evolution and associated deposit structure. Experimental data confirm that pulse merging occurs in laboratory-scale turbidity currents. However, only a weak correspondence was seen between longitudinal variations in the internal flow dynamics and the vertical structure of deposits; multi-pulsed deposits were documented, but transitioned to single-pulsed deposits before the pulse merging point. This early transition is attributed to rapid sedimentation-related depletion of the coarser-grained suspended fraction in the laboratory setting, whose absence may have prevented the distal development of multi-pulsed deposits; this factor complicates estimation of the transition point in natural-scale turbidite systems

The hiding-exposure effect revisited:A method to calculate the mobility of bimodal sediment mixtures

Predicting seabed mobility is hampered by the limited accuracy of sediment transport models when the bed is composed of mixed sediments. The hiding-exposure (HE) effect modifies the threshold of motion of individual grain classes in sediment mixtures and its strength is dependent on the grain size distribution. However, an appropriate method of predicting this effect for bimodal sediment mixtures remains to be developed. The prototypical example of a bimodal mixture is that consisting of a well-sorted sand and gravel for the fine and coarse fractions respectively. Through a comprehensive series of laboratory experiments, the HE effect has been quantified for a full range of sand-gravel mixtures from pure sand to pure gravel, the choice of which has been underpinned by an integrated study of offshore geophysical and sedimentological data found in coastal and shelf seas. In the sand–gravel mixtures used in the present study the critical shear stress needed to mobilise the sand and gravel fractions increased by up to 75% and decreased by up to 64%, respectively, compared to that needed to mobilise well-sorted sediment of similar size. The HE effect was found to be dependent on the percentage of gravel (coarse mode) present in the bimodal mixture, whereby the effect for the mixture is the weighted sum of the HE effect for the fine and coarse modes

Dynamics and deposition of sediment-bearing multi-pulsed flows and geological implication

Previous studies on dilute, multi-pulsed, subaqueous saline flows have demonstrated that pulses will inevitably advect forwards to merge with the flow front. On the assumption that pulse merging occurs in natural-scale turbidity currents, it was suggested that multi-pulsed turbidites that display vertical cycles of coarsening and fining would transition laterally to single-pulsed, normally graded turbidites beyond the point of pulse merging. In this study, experiments of dilute, single- and multi-pulsed sediment-bearing flows (turbidity currents) are conducted to test the linkages between downstream flow evolution and associated deposit structure. Experimental data confirm that pulse merging occurs in laboratory-scale turbidity currents. However, only a weak correspondence was seen between longitudinal variations in the internal flow dynamics and the vertical structure of deposits; multi-pulsed deposits were documented, but transitioned to single-pulsed deposits before the pulse merging point. This early transition is attributed to rapid sedimentation-related depletion of the coarser-grained suspended fraction in the laboratory setting, whose absence may have prevented the distal development of multi-pulsed deposits; this factor complicates estimation of the transition point in natural-scale turbidite systems

Predicting bedforms and primary current stratification in cohesive mixtures of mud and sand

The use of sedimentary structures as indicators of flow and sediment morphodynamics in ancient sediments lies at the very heart of sedimentology, and allows reconstruction of formative flow conditions generated in a wide range of grain sizes and sedimentary environments. However, the vast majority of past research has documented and detailed the range of bedforms generated in essentially cohesionless sediments that lack the presence of mud within the flow and within the sediment bed itself. Yet most sedimentary environments possess fine-grained sediments and recent work has shown how the presence of this fine sediment may substantially modify the fluid dynamics of such flows. It is increasingly evident that understanding the influence of mud, and the presence of cohesive forces, is essential to permit a fuller interpretation of many modern and ancient sedimentary successions. In this paper, the present state of knowledge on the stability of current- and wave-generated bedforms and their primary current stratification is reviewed, and a new extended bedform phase diagram is presented that summarizes the bedforms generated in mixtures of sand and mud under rapidly decelerated flows. This diagram provides a phase space using the variables of yield strength and grain mobility as the abscissa and ordinate axes, respectively, and defines the stability fields of a range of bedforms generated under flows that have modified fluid dynamics owing to the presence of suspended sediment within the flow. Our results also present unique data on a range of bedforms generated in such flows, whose recognition is essential to help interpret such deposits in the ancient sedimentary record, including the following: (1) heterolithic stratification, comprising alternating laminae or layers of sand and mud; (2) the preservation of low-amplitude bed-waves, large current ripples and bed scours with intrascour composite bedforms; (3) low-angle cross-lamination and long lenses and streaks of sand and mud formed by bed-waves; (4) complex stacking of reverse bedforms, mud layers and low-angle cross-lamination on the upstream face of bed scours; (5) planar bedding comprising stacked mud–sand couplets. Furthermore, the results shown herein demonstrate that flow variability is not required to produce deposits consisting of interbedded sand and muds, and that the nature of flaser, wavy and lenticular bedding (sensu Reineck & Wunderlich 1968) may also need reconsideration in the deposits of such sediment-laden flows

The role of biophysical cohesion on subaqueous bed form size

Biologically active, fine-grained sediment forms abundant sedimentary deposits on Earth's surface, and mixed mud-sand dominates many coasts, deltas, and estuaries. Our predictions of sediment transport and bed roughness in these environments presently rely on empirically based bed form predictors that are based exclusively on biologically inactive cohesionless silt, sand, and gravel. This approach underpins many paleoenvironmental reconstructions of sedimentary successions, which rely on analysis of cross-stratification and bounding surfaces produced by migrating bed forms. Here we present controlled laboratory experiments that identify and quantify the influence of physical and biological cohesion on equilibrium bed form morphology. The results show the profound influence of biological cohesion on bed form size and identify how cohesive bonding mechanisms in different sediment mixtures govern the relationships. The findings highlight that existing bed form predictors require reformulation for combined biophysical cohesive effects in order to improve morphodynamic model predictions and to enhance the interpretations of these environments in the geological record

Bedform migration in a mixed sand and cohesive clay intertidal environment and implications for bed material transport predictions

Many coastal and estuarine environments are dominated by mixtures of non-cohesive sand and cohesive mud. The migration rate of bedforms, such as ripples and dunes, in these environments is important in determining bed material transport rates to inform and assess numerical models of sediment transport and geomorphology. However, these models tend to ignore parameters describing the physical and biological cohesion (resulting from clay and extracellular polymeric substances, EPS) in natural mixed sediment, largely because of a scarcity of relevant laboratory and field data. To address this gap in knowledge, data were collected on intertidal flats over a spring-neap cycle to determine the bed material transport rates of bedforms in biologically-active mixed sand-mud. Bed cohesive composition changed from below 2 vol% up to 5.4 vol% cohesive clay, as the tide progressed from spring towards neap. The amount of EPS in the bed sediment was found to vary linearly with the clay content. Using multiple linear regression, the transport rate was found to depend on the Shields stress parameter and the bed cohesive clay content. The transport rates decreased with increasing cohesive clay and EPS content, when these contents were below 2.8 vol% and 0.05 wt%, respectively. Above these limits, bedform migration and bed material transport was not detectable by the instruments in the study area. These limits are consistent with recently conducted sand-clay and sand-EPS laboratory experiments on bedform development. This work has important implications for the circumstances under which existing sand-only bedform migration transport formulae may be applied in a mixed sand-clay environment, particularly as 2.8 vol% cohesive clay is well within the commonly adopted definition of “clean sand”

Canagliflozin and renal outcomes in type 2 diabetes and nephropathy

BACKGROUND Type 2 diabetes mellitus is the leading cause of kidney failure worldwide, but few effective long-term treatments are available. In cardiovascular trials of inhibitors of sodium–glucose cotransporter 2 (SGLT2), exploratory results have suggested that such drugs may improve renal outcomes in patients with type 2 diabetes. METHODS In this double-blind, randomized trial, we assigned patients with type 2 diabetes and albuminuric chronic kidney disease to receive canagliflozin, an oral SGLT2 inhibitor, at a dose of 100 mg daily or placebo. All the patients had an estimated glomerular filtration rate (GFR) of 30 to <90 ml per minute per 1.73 m2 of body-surface area and albuminuria (ratio of albumin [mg] to creatinine [g], >300 to 5000) and were treated with renin–angiotensin system blockade. The primary outcome was a composite of end-stage kidney disease (dialysis, transplantation, or a sustained estimated GFR of <15 ml per minute per 1.73 m2), a doubling of the serum creatinine level, or death from renal or cardiovascular causes. Prespecified secondary outcomes were tested hierarchically. RESULTS The trial was stopped early after a planned interim analysis on the recommendation of the data and safety monitoring committee. At that time, 4401 patients had undergone randomization, with a median follow-up of 2.62 years. The relative risk of the primary outcome was 30% lower in the canagliflozin group than in the placebo group, with event rates of 43.2 and 61.2 per 1000 patient-years, respectively (hazard ratio, 0.70; 95% confidence interval [CI], 0.59 to 0.82; P=0.00001). The relative risk of the renal-specific composite of end-stage kidney disease, a doubling of the creatinine level, or death from renal causes was lower by 34% (hazard ratio, 0.66; 95% CI, 0.53 to 0.81; P<0.001), and the relative risk of end-stage kidney disease was lower by 32% (hazard ratio, 0.68; 95% CI, 0.54 to 0.86; P=0.002). The canagliflozin group also had a lower risk of cardiovascular death, myocardial infarction, or stroke (hazard ratio, 0.80; 95% CI, 0.67 to 0.95; P=0.01) and hospitalization for heart failure (hazard ratio, 0.61; 95% CI, 0.47 to 0.80; P<0.001). There were no significant differences in rates of amputation or fracture. CONCLUSIONS In patients with type 2 diabetes and kidney disease, the risk of kidney failure and cardiovascular events was lower in the canagliflozin group than in the placebo group at a median follow-up of 2.62 years