Métodos no destructivos para la determinación de firmeza. Sensores de Aceleración. Impactadores.

Impact techniques can be used to evaluate firmness on fruit. Chen and Ruiz-Altisent developed and used a 50,4 g impactor with a 19 mm diameter spherical tip, dropping from different heights onto the fruit. Another impactor device is a semispherical impacting tip attached to the end of a pivoting arm. In both devices a small accelerometer is mounted behind the impacting tip. Prototype lateral impactor on-line sorting system for high-speed firmness sorting of fruits has been developed and tested. Preliminary results shows that is possible its use on-line. The last version of an impact device has new elements that improve the data resolution, the signal-noise ratio and the precision

New version of a laboratory impact device for firmness sensing of fruits.

Results of previous studies conducted by different researchers have shown that impact techniques can be used to evaluate firmness (Delwiche et al., 1989; Delwiche et al.;1996; Jaren et al., 1992; Ruiz Altisent et al., 1996). To impact the fruit with a small spherical impactor of known mass and radius of curvature and measure the acceleration of the impactor is a technique described by Chen et al. (1985) and used by several researchers for sensing fruit firmness (Jaren et al., 1992; Correa et al.; 1992). The advantages of this method vs. a force sensor that measures the force as a function of time is that the measured impact-acceleration response is independent of the fruit mass and is less sensitive to the variation in the radius of curvature of the fruit (Chen et al., 1996). Ruiz Altisent et al. (1993) developed and used a 50 g impactor with a 19 mm diameter spherical tip, dropping from different height for fruits (apples, pears, avocados, melons, peaches ...). Another impact device for firmness sensing of fruits was developed by Chen and Ruiz Altisent (1996). They designed and fabricated an experimental low-mass impact sensor for high-speed sensing of fruit firmness. The impactor consisted of a semi-spherical impacting tip attached to the end (near the centre of percussion) of a pivoting arm. Impact is done by swinging the impactor to collide with the fruit. It has been implemented for on-line use. In both devices a small accelerometer is mounted behind the impacting tip. Lateral impactor and vertical impactor have been used in laboratory and the results from non-destructive impact tests have contributed to standardise methods to measure fruit firmness: Barreiro (1992) compared impact parameters and results of Magness-Taylor penetration tests for apples, pears, apricots [and peaches; Agulheiro (1994) studied the behaviour of the impact parameters during seven weeks of cold storage of two melon varieties; Ortiz (1998) used low energy impact and NIR procedures to segregate non crispy, non firm and soft peaches. Steinmetz (1996) compared various non-destructive firmness sensors, based on sound, impact and micro-deformation

Dispositivo impactador de laboratorio para la determinación de la firmeza en fruta: una nueva versión.

Se ha desarrollado una nueva versión de un dispositivo impactador para obtener un sistema versátil y de fácil manejo. La resolución, la precisión y la relación señal-ruido son mayores en el nuevo sistema que en prototipos anteriores. Se ha realizado un diseño de experimentos con diferentes materiales usando el nuevo y el antiguo impactador para comprobar las mejoras conseguidas

Genetic heterogeneity in the toxicity to systemic adenoviral gene transfer of interleukin-12

Despite the efficacy of IL-12 in cancer experimental models, clinical trials with systemic recombinant IL-12 showed unacceptable toxicity related to endogenous IFNgamma production. We report that systemic administration of a recombinant adenovirus encoding IL-12 (AdCMVmIL-12) has a dramatically different survival outcome in a number of mouse pure strains over a wide range of doses. For instance at 2.5 x 10(9) p.f.u., systemic AdCMVmIL-12 killed all C57BL/6 mice but spared all BALB/c mice. Much higher IFNgamma concentrations in serum samples of C57BL/6 than in those from identically treated BALB/c were found. Causes for heterogeneous toxicity can be traced to differences among murine strains in the levels of gene transduction achieved in the liver, as assessed with adenovirus coding for reporter genes. In accordance, IL-12 serum concentrations are higher in susceptible mice. In addition, sera from C57BL/6 mice treated with AdCMVmIL-12 showed higher levels of IL-18, a well-known IFNgamma inducer. Interestingly, lethal toxicity in C57BL/6 mice was abolished by administration of blocking anti-IFNgamma mAbs and also by simultaneous depletion of T cells, NK cells, and macrophages. These observations together with the great dispersion of IFNgamma produced by human PBMCs upon in vitro stimulation with IL-12, or infection with recombinant adenovirus encoding IL-12, suggest that patients might also show heterogeneous degrees of toxicity in response to IL-12 gene transfer

Confianza de los estudiantes de medicina en el aprendizaje de la exploracion obstetrica con simuladores

Students' confidence in performing the procedures improved significantly (p≤0.001) after the interventio

Molecular Mechanisms of Kidney Injury and Repair

Chronic kidney disease (CKD) will become the fifth global cause of death by 2040, thus emphasizing the need to better understand the molecular mechanisms of damage and regeneration in the kidney. CKD predisposes to acute kidney injury (AKI) which, in turn, promotes CKD progression. This implies that CKD or the AKI-to-CKD transition are associated with dysfunctional kidney repair mechanisms. Current therapeutic options slow CKD progression but fail to treat or accelerate recovery from AKI and are unable to promote kidney regeneration. Unraveling the cellular and molecular mechanisms involved in kidney injury and repair, including the failure of this process, may provide novel biomarkers and therapeutic tools. We now review the contribution of different molecular and cellular events to the AKI-to-CKD transition, focusing on the role of macrophages in kidney injury, the different forms of regulated cell death and necroinflammation, cellular senescence and the senescence-associated secretory phenotype (SAPS), polyploidization, and podocyte injury and activation of parietal epithelial cells. Next, we discuss key contributors to repair of kidney injury and opportunities for their therapeutic manipulation, with a focus on resident renal progenitor cells, stem cells and their reparative secretome, certain macrophage subphenotypes within the M2 phenotype and senescent cell clearance

First Episodes of Norovirus and Sapovirus Gastroenteritis Protect Against Subsequent Episodes in a Nicaraguan Birth Cohort

Background: Norovirus and sapovirus cause a large burden of acute gastroenteritis (AGE) in young children. We assessed protection conferred by norovirus and sapovirus AGE episodes against future episodes. Methods: Between June 2017 and July 2018, we recruited 444 newborns in León, Nicaragua. Weekly household surveys identified AGE episodes over 36 months, and AGE stools were tested by reverse transcriptase-quantitative polymerase chain reaction (RT-qPCR) for norovirus genogroup (G)I/GII and sapovirus. We used recurrent-event Cox models and negative control methods to estimate protection conferred by first episodes, controlling for observed and unobserved risk factors, respectively. Results: Sapovirus episodes conferred a 69% reduced hazard of subsequent episodes using the negative control method. Norovirus GI (hazard ratio [HR] = 0.67; 95% confidence interval [CI] = 0.31, 1.3) and GII (HR = 0.20; 95% CI = 0.04, 0.44) episodes also appeared highly protective. Protection against norovirus GII was enhanced following two episodes. Conclusions: Evidence of natural immunity in early childhood provides optimism for the future success of pediatric norovirus and sapovirus vaccines

Dynamical Boson Stars

The idea of stable, localized bundles of energy has strong appeal as a model for particles. In the 1950s John Wheeler envisioned such bundles as smooth configurations of electromagnetic energy that he called {\em geons}, but none were found. Instead, particle-like solutions were found in the late 1960s with the addition of a scalar field, and these were given the name {\em boson stars}. Since then, boson stars find use in a wide variety of models as sources of dark matter, as black hole mimickers, in simple models of binary systems, and as a tool in finding black holes in higher dimensions with only a single killing vector. We discuss important varieties of boson stars, their dynamic properties, and some of their uses, concentrating on recent efforts.Comment: 79 pages, 25 figures, invited review for Living Reviews in Relativity; major revision in 201

Rapid assessment of nonlinear optical propagation effects in dielectrics

Ultrafast laser processing applications need fast approaches to assess the nonlinear propagation of the laser beam in order to predict the optimal range of processing parameters in a wide variety of cases. We develop here a method based on the simple monitoring of the nonlinear beam shaping against numerical prediction. The numerical code solves the nonlinear Schrödinger equation with nonlinear absorption under simplified conditions by employing a state-of-the art computationally efficient approach. By comparing with experimental results we can rapidly estimate the nonlinear refractive index and nonlinear absorption coefficients of the material. The validity of this approach has been tested in a variety of experiments where nonlinearities play a key role, like spatial soliton shaping or fs-laser waveguide writing. The approach provides excellent results for propagated power densities for which free carrier generation effects can be neglected. Above such a threshold, the peculiarities of the nonlinear propagation of elliptical beams enable acquiring an instantaneous picture of the deposition of energy inside the material realistic enough to estimate the effective nonlinear refractive index and nonlinear absorption coefficients that can be used for predicting the spatial distribution of energy deposition inside the material and controlling the beam in the writing process