229 research outputs found
Ion-beam mixing induced by atomic and cluster bombardment in the electronic stopping-power regime
Single crystals of magnesium oxide containing nanoprecipitates of sodium were bombarded with swift ions (∼GeV-Pb, U) or cluster beams (∼20 MeV-C60) to study the phase change induced by electronic processes at high stopping power (≳10 keV/nm). The sodium precipitates and the defect creation were characterized by optical absorption and transmission electron microscopy. The ion or cluster bombardment leads to an evolution of the Na precipitate concentration but the size distribution remains unchanged. The decrease in Na metallic concentration is attributed to mixing effects at the interfaces between Na clusters and MgO. In addition, optical-absorption measurements show a broadening of the absorption band associated with electron plasma oscillations in Na clusters. This effect is due to a decrease of the electron mean free path, which could be induced by defect creation in the metal. All these results show an influence of high electronic stopping power in materials known to be very resistant to irradiation with weak ionizing projectiles. The dependence of these effects on electronic stopping power and on various solid-state parameters is discussed
PSS22 FINAL EVALUATION OF THE PERSISTENCE DEGREE OF PATIENTS IN FIRST-LINE MONOTHERAPY ANTIGLAUCOMATOUS TREATMENT IN SPAIN
YAG nano-light sources with high Ce concentration
We investigate the luminescence properties of 10 nm YAG nanoparticles doped
with Ce ions at 0.2%, 4% and 13% that are designed as active probes for
Scanning Near field Optical Microscopy. They are produced by a physical method
without any subsequent treatment, which is imposed by the desired application.
The structural analysis reveals the amorphous nature of the particles, which we
relate to some compositional defect as indicated by the elemental analysis. The
optimum emission is obtained with a doping level of 4%. The emission of the YAG
nanoparticles doped at 0.2% is strongly perturbed by the crystalline disorder
whereas the 13% doped particles hardly exhibit any luminescence. In the latter
case, the presence of Ce4+ ions is confirmed, indicating that the Ce
concentration is too high to be incorporated efficiently in YAG nanoparticles
in the trivalent state. By a unique procedure combining cathodoluminescence and
Rutherford backscattering spectrometry, we demonstrate that the enhancement of
the particles luminescence yield is not proportional to the doping
concentration, the emission enhancement being larger than the Ce concentration
increase. Time-resolved photoluminescence reveals the presence of quenching
centres likely related to the crystalline disorder as well as the presence of
two distinct Ce ions populations. Eventually, nano-cathodoluminescence
indicates that the emission and therefore the distribution of the doping Ce
ions and of the defects are homogeneous
MLIP genotype as a predictor of pharmacological response in primary open-angle glaucoma and ocular hypertension.
Predicting the therapeutic response to ocular hypotensive drugs is crucial for the clinical treatment and management of glaucoma. Our aim was to identify a possible genetic contribution to the response to current pharmacological treatments of choice in a white Mediterranean population with primary open-angle glaucoma (POAG) or ocular hypertension (OH). We conducted a prospective, controlled, randomized, partial crossover study that included 151 patients of both genders, aged 18 years and older, diagnosed with and requiring pharmacological treatment for POAG or OH in one or both eyes. We sought to identify copy number variants (CNVs) associated with differences in pharmacological response, using a DNA pooling strategy of carefully phenotyped treatment responders and non-responders, treated for a minimum of 6 weeks with a beta-blocker (timolol maleate) and/or prostaglandin analog (latanoprost). Diurnal intraocular pressure reduction and comparative genome wide CNVs were analyzed. Our finding that copy number alleles of an intronic portion of the MLIP gene is a predictor of pharmacological response to beta blockers and prostaglandin analogs could be used as a biomarker to guide first-tier POAG and OH treatment. Our finding improves understanding of the genetic factors modulating pharmacological response in POAG and OH, and represents an important contribution to the establishment of a personalized approach to the treatment of glaucoma
Growth of GaInTlAs layers on InP by molecular beam epitaxy
International audienceGrowth of GaInTlAs alloys on InP001 has been attempted by solid source molecular beam epitaxy. Thallium incorporation into Ga 1x In x As matrices was studied as a function of substrate temperature, arsenic overpressure, matrix composition, and growth rate. At high temperatures 350 °C thallium evaporates, whereas at intermediary temperatures 270-350 °C thallium segregates into droplets on the surface. Only in the low temperature range 180-260 °C can thallium be incorporated in some conditions, leading to mirror-like surfaces. Up to 18% Tl content was incorporated into a Ga 0.70 In 0.30 As matrix and up to 40% Tl into a GaAs matrix. For these high Tl concentrations, Tl droplets are avoided and Tl incorporation is achieved only when using high arsenic pressures. However, this limits surface adatom diffusion and leads to amorphous, polycrystalline, or twinned materials. Finally, a narrow window for single-crystal growth has been found for low Tl contents 4% using optimized growth conditions with low V/III pressure ratios and high growth rates
Ion-beam mixing induced by atomic and cluster bombardment in the electronic stopping-power regime
Recrystallization of amorphous nano-tracks and uniform layers generated by swift-ion-beam irradiation in lithium niobate.
The thermal annealing of amorphous tracks of nanometer-size diameter generated in lithium niobate (LiNbO3) by Bromine ions at 45 MeV, i.e., in the electronic stopping regime, has been investigated by RBS/C spectrometry in the temperature range from 250°C to 350°C. Relatively low fluences have been used (<1012 cm−2) to produce isolated tracks. However, the possible effect of track overlapping has been investigated by varying the fluence between 3×1011 cm−2 and 1012 cm−2. The annealing process follows a two-step kinetics. In a first stage (I) the track radius decreases linearly with the annealing time. It obeys an Arrhenius-type dependence on annealing temperature with activation energy around 1.5 eV. The second stage (II) operates after the track radius has decreased down to around 2.5 nm and shows a much lower radial velocity. The data for stage I appear consistent with a solid-phase epitaxial process that yields a constant recrystallization rate at the amorphous-crystalline boundary. HRTEM has been used to monitor the existence and the size of the annealed isolated tracks in the second stage. On the other hand, the thermal annealing of homogeneous (buried) amorphous layers has been investigated within the same temperature range, on samples irradiated with Fluorine at 20 MeV and fluences of ∼1014 cm−2. Optical techniques are very suitable for this case and have been used to monitor the recrystallization of the layers. The annealing process induces a displacement of the crystalline-amorphous boundary that is also linear with annealing time, and the recrystallization rates are consistent with those measured for tracks. The comparison of these data with those previously obtained for the heavily damaged (amorphous) layers produced by elastic nuclear collisions is summarily discussed
The turbulent structure and diurnal growth of the Saharan atmospheric boundary layer
The turbulent structure and growth of the remote Saharan atmospheric boundary layer (ABL) is described with in situ radiosonde and aircraft measurements and a large-eddy simulation model. A month of radiosonde data from June 2011 provides a mean profile of the midday Saharan ABL, which is characterized by a well-mixed convective boundary layer, capped by a small temperature inversion (<1K) and a deep, near-neutral residual layer. The boundary layer depth varies by up to 100% over horizontal distances of a few kilometers due to turbulent processes alone. The distinctive vertical structure also leads to unique boundary layer processes, such as detrainment of the warmest plumes across the weak temperature inversion, which slows down the warming and growth of the convective boundary layer. As the boundary layer grows, overshooting plumes can also entrain freetropospheric air into the residual layer, forming a second entrainment zone that acts to maintain the inversion above the convective boundary layer, thus slowing down boundary layer growth further.Asingle-column model is unable to accurately reproduce the evolution of the Saharan boundary layer, highlighting the difficulty of representing such processes in large-scale models. These boundary layer processes are special to the Sahara, and possibly hot, dry, desert environments in general, and have implications for the large-scale structure of the Saharan heat low. The growth of the boundary layer influences the vertical redistribution of moisture and dust, and the spatial coverage and duration of clouds, with large-scale dynamical and radiative implications
Recommendations of the Spanish Antibiogram Committee (COESANT) for selecting antimicrobial agents and concentrations for in vitro susceptibility studies using automated systems
Automated antimicrobial susceptibility testing devices are widely implemented in clinical microbiology laboratories in Spain, mainly using EUCAST (European Committee on Antimicrobial Susceptibility Testing) breakpoints. In 2007, a group of experts published recommendations for including antimicrobial agents and selecting concentrations in these systems. Under the patronage of the Spanish Antibiogram Committee (Comité Español del Antibiograma, COESANT) and the Study Group on Mechanisms of Action and Resistance to Antimicrobial Agents (GEMARA) from the Spanish Society of Infectious Diseases and Clinical Microbiology (SEIMC), and aligned with the Spanish National Plan against Antimicrobial Resistance (PRAN), a group of experts have updated this document. The main modifications from the previous version comprise the inclusion of new antimicrobial agents, adaptation of the ranges of concentrations to cover the EUCAST breakpoints and epidemiological cut-off values (ECOFFs), and the inference of new resistance mechanisms. This proposal should be considered by different manufacturers and users when designing new panels or cards. In addition, recommendations for selective reporting are also included. With this approach, the implementation of EUCAST breakpoints will be easier, increasing the quality of antimicrobial susceptibility testing data and their microbiological interpretation. It will also benefit epidemiological surveillance studies as well as the clinical use of antimicrobials aligned with antimicrobial stewardship programs
New Speakers and Language Revitalisation: Arpitan and Community (Re)formation
Today, it is uncontroversial to claim that France’s regional (minority) languages (RLs) are in decline. However, revitalisation movements have nonetheless continued to surface, and this chapter considers one by-product of such efforts: the emergence of new speakers in RL contexts. The term ‘new speaker’ refers to individuals who acquire the target language not through traditional transmission contexts (e.g. home, family), but instead as adults through language revitalisation initiatives. The chapter focuses on revitalisation efforts in the context of Francoprovençal, a severely endangered and understudied RL spoken transnationally across French, Italian and Swiss borders. A critical examination of current studies supplemented with recently collected empirical data shows new speakers to be central agents in a movement championing proto-nation-statehood across national borders, reorienting the region’s traditional sociolinguistic field
- …