Effect of Palmitic Acid on the Electrical Conductivity of Carbon Nanotubes−Epoxy Resin Composites

We found that the palmitic acid allows an efficient dispersion of carbon nanotubes in the epoxy matrix. We have set up an experimental protocol in order to enhance the CNTs dispersion in epoxy resin. Electrical conductivity is optimal using a 1:1 CNTs to palmitic acid weight ratio. The associated percolation threshold is found between 0.05 and 0.1 wt % CNTs, i.e., between 0.03 and 0.06 vol %. The SEM image shows essentially individual CNTs which is inagreement with conductivity measurements. In comparison with composites without palmitic acid, the use of palmitic acid improves the electrical properties of CNTs-epoxy resin composites

Constraining the magnitude of the Chiral Magnetic Effect with Event Shape Engineering in Pb-Pb collisions at sNN\sqrt{s_{\rm NN}} = 2.76$ TeV

In ultrarelativistic heavy-ion collisions, the event-by-event variation of the elliptic flow $v_2$ reflects fluctuations in the shape of the initial state of the system. This allows to select events with the same centrality but different initial geometry. This selection technique, Event Shape Engineering, has been used in the analysis of charge-dependent two- and three-particle correlations in Pb-Pb collisions at $\sqrt{s_{_{\rm NN}}} =2.76$ TeV. The two-particle correlator $\langle \cos(\varphi_\alpha - \varphi_\beta) \rangle$, calculated for different combinations of charges $\alpha$ and $\beta$, is almost independent of $v_2$ (for a given centrality), while the three-particle correlator $\langle \cos(\varphi_\alpha + \varphi_\beta - 2\Psi_2) \rangle$ scales almost linearly both with the event $v_2$ and charged-particle pseudorapidity density. The charge dependence of the three-particle correlator is often interpreted as evidence for the Chiral Magnetic Effect (CME), a parity violating effect of the strong interaction. However, its measured dependence on $v_2$ points to a large non-CME contribution to the correlator. Comparing the results with Monte Carlo calculations including a magnetic field due to the spectators, the upper limit of the CME signal contribution to the three-particle correlator in the 10-50% centrality interval is found to be 26-33% at 95% confidence level.Comment: 20 pages, 6 captioned figures, 1 tables, authors from page 15, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/382

Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes

Background: The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort.Methods: Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects' attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant.Results: There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques.Conclusions: Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques

Strong, Light, Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity

Broader applications of carbon nanotubes to real-world problems have largely gone unfulfilled because of difficult material synthesis and laborious processing. We report high-performance multifunctional carbon nanotube (CNT) fibers that combine the specific strength, stiffness, and thermal conductivity of carbon fibers with the specific electrical conductivity of metals. These fibers consist of bulk-grown CNTs and are produced by high-throughput wet spinning, the same process used to produce high-performance industrial fibers. These scalable CNT fibers are positioned for high-value applications, such as aerospace electronics and field emission, and can evolve into engineered materials with broad long-term impact, from consumer electronics to long-range power transmission

First measurement of Ξc0\Xi_{\rm c}^0 production in pp collisions at s\mathbf{\sqrt{s}} = 7 TeV

The production of the charm-strange baryon $\Xi_{\rm c}^0$ is measured for the first time at the LHC via its semileptonic decay into e$^+\Xi^-\nu_{\rm e}$ in pp collisions at $\sqrt{s}=7$ TeV with the ALICE detector. The transverse momentum ($p_{\rm T}$) differential cross section multiplied by the branching ratio is presented in the interval 1 $<$ $p_{\rm T}$ $<$ 8 GeV/$c$ at mid-rapidity, $|y|$ $<$ 0.5. The transverse momentum dependence of the $\Xi_{\rm c}^0$ baryon production relative to the D$^0$ meson production is compared to predictions of event generators with various tunes of the hadronisation mechanism, which are found to underestimate the measured cross-section ratio.Comment: 22 pages, 6 captioned figures, 1 table, authors from page 17, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/412

Electric field-modulated non-ohmic behavior of carbon nanotube fibers in polar liquids.

We report a previously unseen non-ohmic effect in which the resistivity of carbon nanotube fibers immersed in polar liquids is modulated by the applied electric field. This behavior depends on the surface energy, dielectric constant, and viscosity of the immersion media. Supported by synchrotron SAXS and impedance spectroscopy, we propose a model in which the gap distance, and thus the conductance, of capacitive interbundle junctions is controlled by the applied field.JT acknowledges generous financial support from: The Cambridge Commonwealth European and International Trust, CONACyT (Mexico), Dyson Ltd, and Pembroke College Cambridge. JJV acknowledges support from MINECO (Spain) and FP7-People-Marie Curie Action-CIG.This is the accepted manuscript. The final version is available from ACS at http://pubs.acs.org/doi/abs/10.1021/nn5030835

Heavy-flavor production and medium properties in high-energy nuclear collisions --What next?

Open and hidden heavy-flavor physics in high-energy nuclear collisions are entering a new and exciting stage towards reaching a clearer understanding of the new experimental results with the possibility to link them directly to the advancement in lattice Quantum Chromo-Dynamics (QCD). Recent results from experiments and theoretical developments regarding open and hidden heavy-flavor dynamics have been debated at the Lorentz Workshop Tomography of the Quark-Gluon Plasma with Heavy Quarks, which was held in October 2016 in Leiden, The Netherlands. In this contribution, we summarize identified common understandings and developed strategies for the upcoming five years, which aim at achieving a profound knowledge of the dynamical properties of the quark-gluon plasma

No interactions between heparin and atacicept, an antagonist of B cell survival cytokines.

The TNF family ligands, B cell activating factor of the TNF family (BAFF, also known as B lymphocyte stimulator, BLyS) and a proliferation-inducing ligand (APRIL), share the transmembrane activator and calcium-modulator and cyclophilin ligand (CAML)-interactor (TACI) as one of their common receptors. Atacicept, a chimeric recombinant TACI/IgG1-Fc fusion protein, inhibits both ligands. TACI and APRIL also bind to proteoglycans and to heparin that is structurally related to proteoglycans. It is unknown whether the portion of TACI contained in atacicept can bind directly to proteoglycans, or indirectly via APRIL, and whether this could interfere with the anti-coagulant properties of heparin. Binding of atacicept and APRIL to proteoglycan-positive cells was measured by FACS. Activities of heparin and atacicept were measured with activated factor Xa inhibition and cell-based assays. Effects of heparin on circulating atacicept was monitored in mice. Atacicept did not bind to proteoglycan-positive cells, but when complexed to APRIL could do so indirectly via APRIL. Multimers of atacicept obtained after exposure to cysteine or BAFF 60-mer bound directly to proteoglycans. Atacicept alone, or in complex with APRIL, or in a multimeric form did not interfere with heparin activity in vitro. Conversely, heparin did not influence inhibition of BAFF and APRIL by atacicept and did not change circulating levels of atacicept. Lack of detectable interference of APRIL-bound or free atacicept on heparin activity makes it unlikely that atacicept at therapeutic doses will interfere with the function of heparin in vivo