Nanoanalysis of a sub-nanometre reaction layer in a metal inserted high-k gate stack

Reactions at the interfaces can occur in metal inserted high-k gate stacks and are likely to evolve during device processing. Such reactions may affect the electrical properties of the stack and hence these could change during processing. The key interfaces are often not atomically flat and characterising the reaction layers on the near atomic scale required is a challenge. Aberration corrected scanning transmission electron microscopy (STEM) and spectrum imaging (SI) using electron energy loss spectroscopy (EELS) is used to characterise an HfN or Hf(O,N) reaction layer, ∼0.25 nm wide, between HfO<sub>2</sub> and TiN. This demonstrates the very significant advances in high spatial resolution characterisation made in recent years

Sample preparation for nanoanalytical electron microscopy using the FIB lift-out method and low energy ion milling

Thinning specimens to electron transparency for electron microscopy analysis can be done by conventional (2 - 4 kV) argon ion milling or focused ion beam (FIB) lift-out techniques. Both these methods tend to leave ''mottling'' visible on thin specimen areas, and this is believed to be surface damage caused by ion implantation and amorphisation. A low energy (250 - 500 V) Argon ion polish has been shown to greatly improve specimen quality for crystalline silicon samples. Here we investigate the preparation of technologically important materials for nanoanalysis using conventional and lift-out methods followed by a low energy polish in a GentleMill™ low energy ion mill. We use a low energy, low angle (6 - 8°) ion beam to remove the surface damage from previous processing steps. We assess this method for the preparation of technologically important materials, such as steel, silicon and GaAs. For these materials the ability to create specimens from specific sites, and to be able to image and analyse these specimens with the full resolution and sensitivity of the STEM, allows a significant increase of the power and flexibility of nanoanalytical electron microscopy

Remote measurement utilizing NASA's scanning laser Doppler systems. Volume 2: Laser Doppler dust devil velocity profile measurement program

The first detailed velocity profile data on thermally induced dust vortices are presented. These dust devils will be analyzed and studied to determine their flow fields and origin in an effort to correlate this phenomena with the generation and characteristics of tornadoes. A continuing effort to increase mankind's knowledge of vortex and other meteorological phenomena will hopefully allow the prediction of tornado occurrence, their path, and perhaps eventually even lead to some technique for their destruction

Remote measurement utilizing NASA's scanning laser Doppler systems. Volume 1. Laser Doppler wake vortex tracking at Kennedy Airport

Test operations of the Scanning Laser Doppler System (SLDS) at Kennedy International Airport (KIA) during August 1974 through June 1975 are reported. A total of 1,619 data runs was recorded with a totally operational system during normal landing operations at KIA. In addition, 53 data runs were made during cooperative flybys with the C880 for a grand total of 1672 recorded vortex tracks. Test crews were in attendance at KIA for 31 weeks, of which 25 weeks were considered operational and the other six were packing, unpacking, setup and check out. Although average activity equates to 67 recorded landing operations per week, two periods of complete runway inactivity spanned 20 days and 13 days, respectively. The operation frequency therefore averaged about 88 operations per week

Enhanced Eshelby twist on thin wurtzite InP nanowires and measurement of local crystal rotation

We have performed a detailed study of the lattice distortions of InP wurtzite nanowires containing an axial screw dislocation. Eshelby predicted that this kind of system should show a crystal rotation due to the dislocation induced torque. We have measured the twisting rate and the dislocation Burgers vector on individual wires, revealing that nanowires with a 10-nm radius have a twist up to 100% larger than estimated from elasticity theory. The strain induced by the deformation has a Mexican-hat-like geometry, which may create a tube-like potential well for carriers

Evolution of interdisciplinarity in biodiversity science

The study of biodiversity has grown exponentially in the last thirty years in response to demands for greater understanding of the function and importance of Earth's biodiversity and finding solutions to conserve it. Here, we test the hypothesis that biodiversity science has become more interdisciplinary over time. To do so, we analyze 97,945 peer‐reviewed articles over a twenty‐two‐year time period (1990–2012) with a continuous time dynamic model, which classifies articles into concepts (i.e., topics and ideas) based on word co‐occurrences. Using the model output, we then quantify different aspects of interdisciplinarity: concept diversity, that is, the diversity of topics and ideas across subdisciplines in biodiversity science, subdiscipline diversity, that is, the diversity of subdisciplines across concepts, and network structure, which captures interactions between concepts and subdisciplines. We found that, on average, concept and subdiscipline diversity in biodiversity science were either stable or declining, patterns which were driven by the persistence of rare concepts and subdisciplines and a decline in the diversity of common concepts and subdisciplines, respectively. Moreover, our results provide evidence that conceptual homogenization, that is, decreases in temporal β concept diversity, underlies the observed trends in interdisciplinarity. Together, our results reveal that biodiversity science is undergoing a dynamic phase as a scientific discipline that is consolidating around a core set of concepts. Our results suggest that progress toward addressing the biodiversity crisis via greater interdisciplinarity during the study period may have been slowed by extrinsic factors, such as the failure to invest in research spanning across concepts and disciplines. However, recent initiatives such as the Intergovernmental Science‐Policy Platform on Biodiversity and Ecosystem Services (IPBES) may attract broader support for biodiversity‐related issues and hence interdisciplinary approaches to address scientific, political, and societal challenges in the coming years

Dehydration mechanism of a small molecular solid: 5-nitrouracil hydrate

Previous studies of the dehydration of 5-nitrouracil (5NU) have resulted in it being classified as a ‘‘channel hydrate’’ in which dehydration proceeds principally by the exit of the water molecules along channels in the structure. We have re-examined this proposal and found that in fact there are no continuous channels in the 5NU structure that would contribute to such a mechanism. Product water molecules would be immediately trapped in unlinked voids in the crystal structure and would require some additional mechanism to break loose from the crystal. Through a detailed structural analysis of the macro and micro structure of the 5NU as it dehydrates, we have developed a model for the dehydration process based on the observed development of structural defects in the 5NU crystal and the basic crystallography of the material. The model was tested against standard kinetic measurements and found to present a satisfactory account of kinetic observations, thus defining the mechanism. Overall, the study shows the necessity of complementing standard kinetic studies with a parallel macro and micro examination of the dehydrating material when evaluating the mechanisms of dehydration and decomposition processes

Lightweight Damage Tolerant High-Temperature Radiators for Space Propulsion

No abstract availabl

Towards semantic web mining

Semantic Web Mining aims at combining the two fast-developing research areas Semantic Web and Web Mining. The idea is to improve, on the one hand, the results of Web Mining by exploiting the new semantic structures in the Web; and to make use of Web Mining, on the other hand, for building up the Semantic Web. This paper gives an overview of where the two areas meet today, and sketches ways of how a closer integration could be profitable