309 research outputs found
Spin accumulation probed in multiterminal lateral all-metallic devices
We study spin accumulation in an aluminium island, in which the injection of
a spin current and the detection of the spin accumulation are done by means of
four cobalt electrodes that connect to the island through transparent tunnel
barriers. Although the four electrodes are designed as two electrode pairs of
the same shape, they nonetheless all exhibit distinct switching fields. As a
result the device can have several different magnetic configurations. From the
measurements of the amplitude of the spin accumulation, we can identify these
configurations, and using the diffusion equation for the spin imbalance, we
extract the spin relaxation length ~nm and an
interface spin current polarization at low temperature and
~nm, at room temperature
Large cone angle magnetization precession of an individual nanomagnet with dc electrical detection
We demonstrate on-chip resonant driving of large cone-angle magnetization
precession of an individual nanoscale permalloy element. Strong driving is
realized by locating the element in close proximity to the shorted end of a
coplanar strip waveguide, which generates a microwave magnetic field. We used a
microwave frequency modulation method to accurately measure resonant changes of
the dc anisotropic magnetoresistance. Precession cone angles up to are
determined with better than one degree of resolution. The resonance peak shape
is well-described by the Landau-Lifshitz-Gilbert equation
On-chip detection of ferromagnetic resonance of a single submicron permalloy strip
We measured ferromagnetic resonance of a single submicron ferromagnetic
strip, embedded in an on-chip microwave transmission line device. The method
used is based on detection of the oscillating magnetic flux due to the
magnetization dynamics, with an inductive pick-up loop. The dependence of the
resonance frequency on applied static magnetic field agrees very well with the
Kittel formula, demonstrating that the uniform magnetization precession mode is
being driven
Microwave spectroscopy on magnetization reversal dynamics of nanomagnets with electronic detection
We demonstrate a detection method for microwave spectroscopy on magnetization
reversal dynamics of nanomagnets. Measurement of the nanomagnet anisotropic
magnetoresistance was used for probing how magnetization reversal is resonantly
enhanced by microwave magnetic fields. We used Co strips of 2 um x 130 nm x 40
nm, and microwave fields were applied via an on-chip coplanar wave guide. The
method was applied for demonstrating single domain-wall resonance, and studying
the role of resonant domain-wall dynamics in magnetization reversal
Electrical detection of spin pumping: dc voltage generated by ferromagnetic resonance at ferromagnet/nonmagnet contact
We describe electrical detection of spin pumping in metallic nanostructures.
In the spin pumping effect, a precessing ferromagnet attached to a normal-metal
acts as a pump of spin-polarized current, giving rise to a spin accumulation.
The resulting spin accumulation induces a backflow of spin current into the
ferromagnet and generates a dc voltage due to the spin dependent conductivities
of the ferromagnet. The magnitude of such voltage is proportional to the
spin-relaxation properties of the normal-metal. By using platinum as a contact
material we observe, in agreement with theory, that the voltage is
significantly reduced as compared to the case when aluminum was used.
Furtheremore, the effects of rectification between the circulating rf currents
and the magnetization precession of the ferromagnet are examined. Most
significantly, we show that using an improved layout device geometry these
effects can be minimized.Comment: 9 pages, 11 figure
Electrical detection of spin pumping due to the precessing magnetization of a single ferromagnet
We report direct electrical detection of spin pumping, using a lateral normal
metal/ferromagnet/normal metal device, where a single ferromagnet in
ferromagnetic resonance pumps spin polarized electrons into the normal metal,
resulting in spin accumulation. The resulting backflow of spin current into the
ferromagnet generates a d.c. voltage due to the spin dependent conductivities
of the ferromagnet. By comparing different contact materials (Al and /or Pt),
we find, in agreement with theory, that the spin related properties of the
normal metal dictate the magnitude of the d.c. voltage
Strongly anisotropic spin relaxation in graphene/transition metal dichalcogenide heterostructures at room temperature
Graphene has emerged as the foremost material for future two-dimensional
spintronics due to its tuneable electronic properties. In graphene, spin
information can be transported over long distances and, in principle, be
manipulated by using magnetic correlations or large spin-orbit coupling (SOC)
induced by proximity effects. In particular, a dramatic SOC enhancement has
been predicted when interfacing graphene with a semiconducting transition metal
dechalcogenide, such as tungsten disulphide (WS). Signatures of such an
enhancement have recently been reported but the nature of the spin relaxation
in these systems remains unknown. Here, we unambiguously demonstrate
anisotropic spin dynamics in bilayer heterostructures comprising graphene and
WS. By using out-of-plane spin precession, we show that the spin lifetime
is largest when the spins point out of the graphene plane. Moreover, we observe
that the spin lifetime varies over one order of magnitude depending on the spin
orientation, indicating that the strong spin-valley coupling in WS is
imprinted in the bilayer and felt by the propagating spins. These findings
provide a rich platform to explore coupled spin-valley phenomena and offer
novel spin manipulation strategies based on spin relaxation anisotropy in
two-dimensional materials
Thermally driven spin injection from a ferromagnet into a non-magnetic metal
Creating, manipulating and detecting spin polarized carriers are the key
elements of spin based electronics. Most practical devices use a perpendicular
geometry in which the spin currents, describing the transport of spin angular
momentum, are accompanied by charge currents. In recent years, new sources of
pure spin currents, i.e., without charge currents, have been demonstrated and
applied. In this paper, we demonstrate a conceptually new source of pure spin
current driven by the flow of heat across a ferromagnetic/non-magnetic metal
(FM/NM) interface. This spin current is generated because the Seebeck
coefficient, which describes the generation of a voltage as a result of a
temperature gradient, is spin dependent in a ferromagnet. For a detailed study
of this new source of spins, it is measured in a non-local lateral geometry. We
developed a 3D model that describes the heat, charge and spin transport in this
geometry which allows us to quantify this process. We obtain a spin Seebeck
coefficient for Permalloy of -3.8 microvolt/Kelvin demonstrating that thermally
driven spin injection is a feasible alternative for electrical spin injection
in, for example, spin transfer torque experiments
Bloch-Wall Phase Transition in the Spherical Model
The temperature-induced second-order phase transition from Bloch to linear
(Ising-like) domain walls in uniaxial ferromagnets is investigated for the
model of D-component classical spin vectors in the limit D \to \infty. This
exactly soluble model is equivalent to the standard spherical model in the
homogeneous case, but deviates from it and is free from unphysical behavior in
a general inhomogeneous situation. It is shown that the thermal fluctuations of
the transverse magnetization in the wall (the Bloch-wall order parameter)
result in the diminishing of the wall transition temperature T_B in comparison
to its mean-field value, thus favouring the existence of linear walls. For
finite values of T_B an additional anisotropy in the basis plane x,y is
required; in purely uniaxial ferromagnets a domain wall behaves like a
2-dimensional system with a continuous spin symmetry and does not order into
the Bloch one.Comment: 16 pages, 2 figure
Spin Caloritronics
This is a brief overview of the state of the art of spin caloritronics, the
science and technology of controlling heat currents by the electron spin degree
of freedom (and vice versa).Comment: To be published in "Spin Current", edited by S. Maekawa, E. Saitoh,
S. Valenzuela and Y. Kimura, Oxford University Pres
- …
