Effect of dose rate on ion beam mixing in Nb-Si

The influence of dose rate, i.e., ion flux, on ion beam mixing in Nb‐Si bilayer samples was measured at room temperature and 325 °C. At the higher temperature, an increase in dose rate of a factor of 20 caused a decrease in the thickness of the mixed layer by a factor of 1.6 for equal total doses. At room temperature, the same change in flux had no effect on mixing. These results are consistent with radiation‐enhanced diffusion theory in the recombination‐limited regime

Low-temperature ion beam mixing of Pt and Si markers in Ge

The mixing of Pt and Si marker atoms in Ge during 750-keV Xe irradiation was measured at temperatures between 6 and 500 K. The low-temperature measurements show that the mixing parameter for Pt is nearly twice that for Si. This result is in strong contradiction to the collisional theory of ion beam mixing. A weak temperature dependence in the mixing is found for both markers

Threshold displacement and interstitial-atom formation energies in Ni3Al

Threshold displacement energies for atomic displacements along 110, 100, and 111 directions, and formation enthalpies of several symmetric interstitial atom configurations were calculated for Ni3Al by computer simulation using "embedded atom method” potentials. The Ni-Ni (100) dumbbell in the plane containing only Ni atoms has the lowest interstitial-atom enthalpy although the enthalpies of other configurations are similar. Interstitial configurations involving Al atoms all have much higher enthalpies. The anisotropy of the threshold energies in Ni3Al is similar to pure metals and no significant difference in threshold energy was observed for 110 replacement chains in rows containing all Ni atoms or alternating Ni-Al atoms. Various metastable interstitial atom configurations were observed, including crowd-ions. In addition, the spontaneous recombination volume for some configurations can be much smaller than in pure metals. The consequences of these results for radiation induced segregation and amorphization are discusse

Sintering characteristics of nanocrystalline TiO2—A study combining small angle neutron scattering and nitrogen absorption-BET

Small angle neutron scattering (SANS) was employed to characterize the pore structure of nanophase TiO2 ceramic materials compacted at different temperatures. Nanophase samples, produced by inert gas condensation, were compacted at 25, 290, 413, and 550 °C using a pressure of 1 GPa. The pore size distribution of the sample compacted at room temperature was very broad, with sizes ranging from 3-30 nm and pores comprising 38% of the sample volume. Compaction at 290 and 413 °C reduced the pore volume to 25% and 20%, respectively, by eliminating pores at both the small and large ends of the distribution. Compaction at 550 °C resulted in a pore volume that was less than 8%. Complications in the SANS analysis arising from the scattering from grain boundaries are discussed. The results from SANS are compared with those derived from nitrogen absorption, BET, measurement

Cooperative mixing induced surface roughening in bilayer metals: a possible novel surface damage mechanism

Molecular dynamics simulations have been used to study a collective atomic transport phenomenon by repeated Ar$^+$ irradiations in the Ti/Pt interfacial system. The ion-induced injection of surface atoms to the bulk, the ejection of bulk atoms to the top layers together with surface erosion is strongly enhanced by interfacial mixing. This process leads to a dense interfacial material, and broadening of the interface region. The process scales with the relative difference of the atomic masses. We find that surface roughening and interfacial mixing is strongly coupled via an enhanced counterflow material transport normal to the surface which might be a novel surface damage mechanism. This cooperative phenomenon is active when the bilayer system is subjected to a high dose ion irradiation (multiple ion irradiations) and leads to surface cavity growth.Comment: 6 pages, 6 figures. accepted in Nucl. Instrum. Meth.

Strong mass effect on ion beam mixing in metal bilayers

Molecular dynamics simulations have been used to study the mechanism of ion beam mixing in metal bilayers. We are able to explain the ion induced low-temperature phase stability and melting behavior of bilayers using only a simple ballistic picture up to 10 keV ion energies. The atomic mass ratio of the overlayer and the substrate constituents seems to be a key quantity in understanding atomic mixing. The critical bilayer mass ratio of $\delta < 0.33$ is required for the occurrence of a thermal spike (local melting) with a lifetime of $\tau > 0.3$ ps at low-energy ion irradiation (1 keV) due to a ballistic mechanism. The existing experimental data follow the same trend as the simulated values.Comment: 4 pages, 4 figures, preprin

Does the thermal spike affect low-energy ion-induced interfacial mixing?

Molecular dynamics simulations have been used to obtain the three-dimensional distribution of interfacial mixing and cascade defects in Ti/Pt multilayer system due to single 1 keV $Ar^+$ impacts at grazing angle of incidence. The Ti/Pt system was chosen because of its relatively high heat of mixing in the binary alloy and therefore a suitable candidate for testing the effect of heat of mixing on ion-beam mixing. However, the calculated mixing profile is not sensitive to the heat of mixing. Therefore the thermal spike model of mixing is not fully supported under these irradiation conditions. Instead we found that the majority of mixing occurs after the thermal spike during the relaxation process. These conclusions are supported by liquid, vacancy as well as adatom analysis. The interfacial mixing is in various aspects anomalous in this system: the time evolution of mixing is leading to a phase delay for Ti mixing, and Pt exhibits an unexpected double peaked mixing evolution. The reasons to these effects are discussed.Comment: 7 pages, 12 figures, Nucl. Instr. Meth. B211, 524. (2003

Theory of mind in utterance interpretation: the case from clinical pragmatics

The cognitive basis of utterance interpretation is an area that continues to provoke intense theoretical debate among pragmatists. That utterance interpretation involves some type of mind-reading or theory of mind (ToM) is indisputable. However, theorists are divided on the exact nature of this ToM-based mechanism. In this paper, it is argued that the only type of ToM-based mechanism that can adequately represent the cognitive basis of utterance interpretation is one which reflects the rational, intentional, holistic character of interpretation. Such a ToM-based mechanism is supported on conceptual and empirical grounds. Empirical support for this view derives from the study of children and adults with pragmatic disorders. Specifically, three types of clinical case are considered. In the first case, evidence is advanced which indicates that individuals with pragmatic disorders exhibit deficits in reasoning and the use of inferences. These deficits compromise the ability of children and adults with pragmatic disorders to comply with the rational dimension of utterance interpretation

Investigation of focused ion beam induced damage in single crystal diamond tools

In this work, transmission electron microscope (TEM) measurements and molecular dynamics (MD) simulations were carried out to characterise the focused ion beam (FIB) induced damage layer in a single crystal diamond tool under different FIB processing voltages. The results obtained from the experiments and the simulations are in good agreement. The results indicate that during FIB processing cutting tools made of natural single crystal diamond, the energetic Ga+ collision will create an impulse-dependent damage layer at the irradiated surface. For the tested beam voltages in a typical FIB system (from 8 kV to 30 kV), the thicknesses of the damaged layers formed on a diamond tool surface increased from 11.5 nm to 27.6 nm. The dynamic damage process of FIB irradiation and ion-solid interactions physics leading to processing defects in FIB milling were emulated by MD simulations. The research findings from this study provide the in-depth understanding of the wear of nanoscale multi-tip diamond tools considering the FIB irradiation induced doping and defects during the tool fabrication process