232 research outputs found

    Modeling and Simulation of Microscale Flows

    Get PDF

    Dissipation Induced Modulation Instability: New Applications for Frequency Combs and Pulses Generation

    Get PDF
    We present a new technique based on a dissipation induced modulation instability, caused by unbalanced spectral dissipation for signal and idler waves, with applications in amplifiers and parametric oscillators but especially for frequency combs and pulses generation in fiber resonators

    Amplification through losses in nonlinear fiber optics

    Get PDF
    We present the most recent results about a novel modulation instability of a continuous light wave in a normal dispersion nonlinear optical fiber, induced by spectrally asymmetric losses for signal and idler waves. The presence of such spectrally asymmetric losses profile causes energy transfer from the pump to both signal and idler. A variety of applications concerning both amplification of signals and generation of pulses is discussed

    High repetition rate multi-similariton laser

    Get PDF
    We present the numerical demonstration of an harmonically mode-locked multi-similariton laser supporting a low jitter, stable train of self similar high repetition rate pulses exploiting, as mode-locking mechanism, the principle of dissipative Faraday instability (DFI) induced by zigzag modulation of spectral losses [1, 2]. At variance with the theoretical and experimental studies on the DFI [1, 2], where the amplification was distributed along the fiber, we propose here a lumped amplification scheme suitable for a more flexible design of mode-locked lasers pumped by rare-earth gain medium (Erbium, Ytterbium). We have considered an unidirectional all normal dispersion ring resonator with two lumped amplifying sections separated by two passive nonlinear dispersive fibers. Just before each amplifying section is located a spectral filter. The two filters differ by having the transmittance profile respectively blue- and red-detuned relatively to the amplifiers central frequency. The detuned spectral filters provide the necessary periodic zigzag modulation of the spectral losses needed to trigger the DFI. The CW operation of the laser is unstable and the growth of spectral sidebands results in a temporal modulation of the field temporal profile leading to the formation of a pulse train with repetition rate corresponding to the instability frequency around 0.1 THz and pulse duration of about 3 ps. Propagation in the fibers has been modeled using the generalized nonlinear Schrödinger equation and the lumped amplification by a saturable gain term with spectral bandwidth typical of rare-earth amplifiers

    In-cavity pulse shaping and dissipative parametric instability mode-locking in fibre lasers

    Get PDF
    At the level of fundamental research, fibre lasers provide convenient and reproducible experimental settings for the study of a variety of nonlinear dynamical processes, while at the applied research level, pulses with different and optimised features – e.g., in terms of pulse duration, temporal and/or spectral shape, energy, repetition rate and emission bandwidth – are sought with the general constraint of developing efficient cavity architectures. In this work, we review our recent progress on the realisation of pulse shaping in passively- mode-locked fibre lasers by inclusion of an amplitude and phase spectral filter into the laser cavity. We present a fibre laser design in which pulse shaping occurs through filtering of a spectrally nonlinearly broadened pulse in the cavity. This strategy of pulse shaping is illustrated through the numerical demonstration of the laser operation in different pulse-generation regimes, including parabolic, flattop and triangular waveform generations, depending on the amplitude profile of the in-cavity spectral filter [1]. As an application of this general approach, we show that the use of an in-cavity flat-top spectral filter makes it possible to directly generate sinc-shaped Nyquist pulses of high quality and of a widely tunable bandwidth from the laser [2]. We also report on a recently-developed versatile erbium-doped fibre laser, in which conventional soliton, dispersion-managed soliton (stretched-pulse) and dissipative soliton mode-locking regimes can be selectively and reliably targeted by programming different group-velocity dispersion profiles and bandwidths on an in-cavity programmable filter [3]. Further, we report on our recent results on the passive mode locking of a Raman fibre laser by a recently predicted new type of parametric instability – the dissipative Faraday instability [4], where spatially periodic zig-zag modulation of spectrally dependent losses can lead to pattern formation in the temporal domain. High-order harmonic mode locking is achieved in a very simple experimental configuration, with the laser cavity including an optical fibre and two chirped fibre Bragg gratings, and no additional mode-locking elements. The results not only open up new possibilities for the design of mode-locked lasers, but extend beyond fibre optics to other fields of physics and engineering. References [1] S. Boscolo, C. Finot, H. Karakuzu, P. Petropoulos, “Pulse shaping in mode-locked fiber laser by in-cavity spectral filter,” Opt. Lett., vol. 39, pp. 438–441, 2014. [2] S. Boscolo, C. Finot, S. K. Turitsyn, “Bandwidth programmable optical Nyquist pulse generation in passively mode-locked fiber laser,” IEEE Photon. J., vol. 7, 7802008(8), 2015. [3] J. Peng, S. Boscolo, “Filter-based dispersion-managed versatile ultrafast fibre laser,” Sci. Rep., 2016, In press. [4] A. M. Perego, N. Tarasov, D. V. Churkin, S. K. Turitsyn, K. Staliunas, “Pattern generation by dissipative parametric instability,” Phys. Rev. Lett., vol. 116, 028701, 2016

    Neodymium isotope analyses after combined extraction of actinide and lanthanide elements from seawater and deep-sea coral aragonite

    Get PDF
    Author Posting. © American Geophysical Union, 2016. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry, Geophysics, Geosystems 17 (2016): 232–240, doi:10.1002/2015GC006130.Isotopes of the actinide elements protactinium (Pa), thorium (Th), and uranium (U), and the lanthanide element neodymium (Nd) are often used as complementary tracers of modern and past oceanic processes. The extraction of such elements from low abundance matrices, such as seawater and carbonate, is however labor-intensive and requires significant amounts of sample material. We here present a combined method for the extraction of Pa, Th, and Nd from 5 to 10 L seawater samples, and of U, Th, and Nd from <1 g carbonate samples. Neodymium is collected in the respective wash fractions of Pa-Th and U-Th anion exchange chromatographies. Regardless of the original sample matrix, Nd is extracted during a two-stage ion chromatography, followed by thermal ionization mass spectrometry (TIMS) analysis as NdO+. Using this combined procedure, we obtained results for Nd isotopic compositions on two GEOTRACES consensus samples from Bermuda Atlantic Time Series (BATS), which are within error identical to results for separately sampled and processed dedicated Nd samples (εNd = −9.20 ± 0.21 and −13.11 ± 0.21 for 15 and 2000 m water depths, respectively; intercalibration results from 14 laboratories: εNd = −9.19 ± 0.57 and −13.14 ± 0.57). Furthermore, Nd isotope results for an in-house coral reference material are identical within analytical uncertainty for dedicated Nd chemistry and after collection of Nd from U-Th anion exchange chromatography. Our procedure does not require major adaptations to independently used ion exchange chromatographies for U-Pa-Th and Nd, and can hence be readily implemented for a wide range of applications.Funding that supported this work was received from the National Science Foundation (NSF 0752402), the Leverhulme Trust (RPG-398), the Natural Environmental Research Council (NE/J021636/1 and NE/N003861/1), the European Research Council (278705), and the Grantham Institute for Climate Change.2016-07-0

    Groundwater discharge impacts marine isotope budgets of Li, Mg, Ca, Sr, and Ba

    Get PDF
    © The Author(s), 2021. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Mayfield, K. K., Eisenhauer, A., Santiago Ramos, D. P., Higgins, J. A., Horner, T. J., Auro, M., Magna, T., Moosdorf, N., Charette, M. A., Gonneea, M. E., Brady, C. E., Komar, N., Peucker-Ehrenbrink, B., & Paytan, A. Groundwater discharge impacts marine isotope budgets of Li, Mg, Ca, Sr, and Ba. Nature Communications, 12(1), (2021): 148-020-20248-3, doi:10.1038/s41467-020-20248-3.Groundwater-derived solute fluxes to the ocean have long been assumed static and subordinate to riverine fluxes, if not neglected entirely, in marine isotope budgets. Here we present concentration and isotope data for Li, Mg, Ca, Sr, and Ba in coastal groundwaters to constrain the importance of groundwater discharge in mediating the magnitude and isotopic composition of terrestrially derived solute fluxes to the ocean. Data were extrapolated globally using three independent volumetric estimates of groundwater discharge to coastal waters, from which we estimate that groundwater-derived solute fluxes represent, at a minimum, 5% of riverine fluxes for Li, Mg, Ca, Sr, and Ba. The isotopic compositions of the groundwater-derived Mg, Ca, and Sr fluxes are distinct from global riverine averages, while Li and Ba fluxes are isotopically indistinguishable from rivers. These differences reflect a strong dependence on coastal lithology that should be considered a priority for parameterization in Earth-system models.We thank A. Beck, H. Dulai, I. Santos, C. Benitez-Nelson, W. Moore, A. Martin, and H. Windom for sample access. We also thank A. Kolevica, A. Heuser, H. Pryer, J. Middleton, R. Franks, F. Lon, N. Slater, and O. Šebek for their laboratory and analytical assistance. This material is based upon research supported by the National Science Foundation Graduate Research Fellowship Program and an internship provided through the U.S. Geological Survey Graduate Research Internship Program (GRIP). This research was also supported by grants from: the German Academic Exchange Service (DAAD), Northern California chapter of the Achievement Rewards for College Scientists Foundation, International Association of GeoChemistry, Geological Society of America, Northern California Geological Society, Myers Trust, Friends of Long Marine Lab, and UC MEXUS (to K.K.M.). We acknowledge funding from EU-ITN Horizon project 643084 (to A.E. and T.M.) and NSF grant Award Number 1259440 (to A.P.). We also acknowledge funding from NSF grant award number OCE-1736949 (to T.J.H.). Any use of trade, firm or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government

    Dysfunction of complement receptors CR3 (CD11b/18) and CR4 (CD11c/18) in pre-eclampsia : a genetic and functional study

    Get PDF
    Objective To study genetic variants and their function within genes coding for complement receptors in pre-eclampsia. Design A case-control study. Setting Pre-eclampsia is a common vascular disease of pregnancy. The clearance of placenta-derived material is one of the functions of the complement system in pregnancy. Population We genotyped 500 women with pre-eclamptic pregnancies and 190 pregnant women without pre-eclampsia, as controls, from the FINNPEC cohort, and 122 women with pre-eclamptic pregnancies and 1905 controls from the national FINRISK cohort. Methods The functional consequences of genotypes discovered by targeted exomic sequencing were explored by analysing the binding of the main ligand iC3b to mutated CR3 or CR4, which were transiently expressed on the surface of COS-1 cells. Main outcome measures Allele frequencies were compared between pre-eclamptic pregnancies and controls in genetic studies. The functional consequences of selected variants were measured by binding assays. Results The most significantly pre-eclampsia-linked CR3 variant M441K (P = 4.27E-4, OR = 1.401, 95% CI = 1.167-1.682) displayed a trend of increased adhesion to iC3b (P = 0.051). The CR4 variant A251T was found to enhance the adhesion of CR4 to iC3b, whereas W48R resulted in a decrease of the binding of CR4 to iC3b. Conclusions Results suggest that changes in complement-facilitated phagocytosis are associated with pre-eclampsia. Further studies are needed to ascertain whether aberrant CR3 and CR4 activity leads to altered pro- and anti-inflammatory cytokine responses in individuals carrying the associated variants, and the role of these receptors in pre-eclampsia pathogenesis. Tweetable abstract Genetic variants of complement receptors CR3 and CR4 have functional consequences that are associated with pre-eclampsia.Peer reviewe

    A comprehensive 1000 Genomes-based genome-wide association meta-analysis of coronary artery disease

    Get PDF
    Existing knowledge of genetic variants affecting risk of coronary artery disease (CAD) is largely based on genome-wide association studies (GWAS) analysis of common SNPs. Leveraging phased haplotypes from the 1000 Genomes Project, we report a GWAS meta-analysis of 185 thousand CAD cases and controls, interrogating 6.7 million common (MAF>0.05) as well as 2.7 million low frequency (0.005<MAF<0.05) variants. In addition to confirmation of most known CAD loci, we identified 10 novel loci, eight additive and two recessive, that contain candidate genes that newly implicate biological processes in vessel walls. We observed intra-locus allelic heterogeneity but little evidence of low frequency variants with larger effects and no evidence of synthetic association. Our analysis provides a comprehensive survey of the fine genetic architecture of CAD showing that genetic susceptibility to this common disease is largely determined by common SNPs of small effect siz
    corecore