Towards functional safety in automotive electronics

International audienceThe part of electronics in automobile design becomes more and more important with an exponential growth during the last 10 years. Nowadays, innovation in automotive industry is driven by electronics. New upcoming electrical/electronic systems (E/E systems) such as advanced driver assistance systems or x-by-wire systems as well as consumer expectation regarding safety will require a dedicated standard to ensure design, development and production of safe products before their introduction on the market.ISO/TC22/SC3/WG16 has been formed to issue the ISO26262 international standard that will specifically address functional safety of E/E systems of automotive industry.This paper provides information about the future ISO26262 which is based on the current results of ISO/TC22/SC3/WG16 [1], those still being subject to changes before the international standard release

Two-dimensional solitons on the surface of magnetic fluids

We report an observation of a stable soliton-like structure on the surface of a ferrofluid, generated by a local perturbation in the hysteretic regime of the Rosensweig instability. Unlike other pattern-forming systems with localized 2D structures, magnetic fluids are characterized by energy conservation; hence their mechanism of soliton stabilization is different from the previously discussed gain/loss balance mechanism. The radioscopic measurements of the soliton's surface profile suggest that locking on the underlying periodic structure is instrumental in its stabilization.Comment: accepted for publication by Physical Review Letter

Removing data and using metafounders alleviates biases for all traits in Lacaune dairy sheep predictions

Bias in dairy genetic evaluations, when it exists, has to be understood and properly addressed. The origin of biases is not always clear. We analyzed 40 yr of records from the Lacaune dairy sheep breeding program to evaluate the extent of bias, assess possible corrections, and emit hypotheses on its origin. The data set included 7 traits (milk yield, fat and protein contents, somatic cell score, teat angle, udder cleft, and udder depth) with records from 600,000 to 5 million depending on the trait,-1,900,000 animals, and-5,900 genotyped elite artificial insemination rams. For the-8% animals with missing sire, we fit 25 unknown parent groups. We used the linear regression method to compare "partial" and "whole" predictions of young rams before and after progeny testing, with 7 cut-off points, and we obtained estimates of their bias, (over)dispersion, and accuracy in early proofs. We tried (1) several scenarios as follows: multiple or single trait, the "official" (routine) evalua-tion, which is a mixture of both single and multiple trait, and "deletion" of data before 1990; and (2) sev-eral models as follows: BLUP and single-step genomic (SSG)BLUP with fixed unknown parent groups or metafounders, where, for metafounders, their relation-ship matrix gamma was estimated using either a model for inbreeding trend, or base allele frequencies esti-mated by peeling. The estimate of gamma obtained by modeling the inbreeding trend resulted in an estimated increase of inbreeding, based on markers, faster than the pedigree-based one. The estimated genetic trends were similar for most models and scenarios across all traits, but were shrunken when gamma was estimated by peeling. This was due to shrinking of the estimates of metafounders in the latter case. Across scenarios, all traits showed bias, generally as an overestimate of genetic trend for milk yield and an underestimate for the other traits. As for the slope, it showed overdisper-sion of estimated breeding values for all traits. Using multiple-trait models slightly reduced the overestimate of genetic trend and the overdispersion, as did including genomic information (i.e., SSGBLUP) when the gam-ma matrix was estimated by the model for inbreeding trend. However, only deletion of historical data before 1990 resulted in elimination of both kind of biases. The SSGBLUP resulted in more accurate early proofs than BLUP for all traits. We considered that a snowball ef-fect of small errors in each genetic evaluation, combined with selection, may have resulted in biased evaluations. Improving statistical methods reduced some bias but not all, and a simple solution for this data set was to remove historical records

Two and three-dimensional oscillons in nonlinear Faraday resonance

We study 2D and 3D localised oscillating patterns in a simple model system exhibiting nonlinear Faraday resonance. The corresponding amplitude equation is shown to have exact soliton solutions which are found to be always unstable in 3D. On the contrary, the 2D solitons are shown to be stable in a certain parameter range; hence the damping and parametric driving are capable of suppressing the nonlinear blowup and dispersive decay of solitons in two dimensions. The negative feedback loop occurs via the enslaving of the soliton's phase, coupled to the driver, to its amplitude and width.Comment: 4 pages; 1 figur

Is the Unitarity of the quark-mixing-CKM-matrix violated in neutron β\beta-decay?

We report on a new measurement of neutron $\beta$-decay asymmetry. From the result \linebreak $A_0$ = -0.1189(7), we derive the ratio of the axial vector to the vector coupling constant $\lambda$ = ${\it g_A/g_V}$ = -1.2739(19). When included in the world average for the neutron lifetime $\tau$ = 885.7(7)s, this gives the first element of the Cabibbo-Kobayashi-Maskawa (CKM) matrix $V_{ud}$. With this value and the Particle Data Group values for $V_{us}$ and $V_{ub}$, we find a deviation from the unitarity condition for the first row of the CKM matrix of $\Delta$ = 0.0083(28), which is 3.0 times the stated error

Cymantrene–Triazole "Click" Products: Structural Characterization and Electrochemical Properties

We report the first known examples of triazole-derivatized cymantrene complexes (η5-[4-substituted triazol-1-yl]cyclopentadienyl)tricarbonylmanganese(I), obtained via a “click” chemical synthesis, bearing a phenyl, 3-aminophenyl, or 4-aminophenyl moiety at the 4-position of the triazole ring. Structural characterization data using multinuclear NMR, UV–vis, ATR-IR, and mass spectrometric methods are provided, as well as crystallographic data for (η5-[4-phenyltriazol-1-yl]cyclopentadienyl)tricarbonylmanganese(I) and (η5-[4-(3-aminophenyl)triazol-1-yl]cyclopentadienyl)tricarbonylmanganese(I). Cyclic voltammetric characterization of the redox behavior of each of the three cymantrene–triazole complexes is presented together with digital simulations, in situ infrared spectroelectrochemistry, and DFT calculations to extract the associated kinetic and thermodynamic parameters. The trypanocidal activity of each cymantrene–triazole complex is also examined, and these complexes are found to be more active than cymantrene alone

Practical computational toolkits for dendrimers and dendrons structure design

Dendrimers and dendrons offer an excellent platform for developing novel drug delivery systems and medicines. The rational design and further development of these repetitively branched systems are restricted by difficulties in scalable synthesis and structural determination, which can be overcome by judicious use of molecular modelling and molecular simulations. A major difficulty to utilise in silico studies to design dendrimers lies in the laborious generation of their structures. Current modelling tools utilise automated assembly of simpler dendrimers or the inefficient manual assembly of monomer precursors to generate more complicated dendrimer structures. Herein we describe two novel graphical user interface (GUI) toolkits written in Python that provide an improved degree of automation for rapid assembly of dendrimers and generation of their 2D and 3D structures. Our first toolkit uses the RDkit library, SMILES nomenclature of monomers and SMARTS reaction nomenclature to generate SMILES and mol files of dendrimers without 3D coordinates. These files are used for simple graphical representations and storing their structures in databases. The second toolkit assembles complex topology dendrimers from monomers to construct 3D dendrimer structures to be used as starting points for simulation using existing and widely available software and force fields. Both tools were validated for ease-of-use to prototype dendrimer structure and the second toolkit was especially relevant for dendrimers of high complexity and size.Peer reviewe

Intermatrix synthesis: easy technique permitting preparation of polymer-stabilized nanoparticles with desired composition and structure

The synthesis of polymer-stabilized nanoparticles (PSNPs) can be successfully carried out using intermatrix synthesis (IMS) technique, which consists in sequential loading of the functional groups of a polymer with the desired metal ions followed by nanoparticles (NPs) formation stage. After each metal-loading-NPs-formation cycle, the functional groups of the polymer appear to be regenerated. This allows for repeating the cycles to increase the NPs content or to obtain NPs with different structures and compositions (e.g. core-shell or core-sandwich). This article reports the results on the further development of the IMS technique. The formation of NPs has been shown to proceed by not only the metal reduction reaction (e.g. Cu0-NPs) but also by the precipitation reaction resulting in the IMS of PSNPs of metal salts (e.g. CuS-NPs)

Green electrochemical template synthesis of CoPt nanoparticles with tunable size, composition, and magnetism from microemulsions using an ionic liquid (bmimPF6)

Altres ajuts: Substrates have been prepared in IMB-CNM (CSIC),supported by the (CSIC) NGG-258 project.Electrodeposition from microemulsions using ionic liquids is revealed as a green method for synthesizing magnetic alloyed nanoparticles, avoiding the use of aggressive reducing agents. Microemulsions containing droplets of aqueous solution (electrolytic solution containing Pt(IV) and Co(II) ions) in an ionic liquid (bmimPF) define nanoreactors in which the electrochemical reduction takes place. Highly crystalline hcp alloyed CoPt nanoparticles, in the 10-120 nm range with a rather narrow size distribution, have been deposited on a conductive substrate. The relative amount of aqueous solution to ionic liquid determines the size of the nanoreactors, which serve as nanotemplates for the growth of the nanoparticles and hence determine their size and distribution. Further, the stoichiometry (PtCo) of the particles can be tuned by the composition of the electrolytic solution inside the droplets. The control of the size and composition of the particles allows tailoring the room-temperature magnetic behavior of the nanoparticles from superparaparamagnetic to hard magnetic (with a coercivity of H = 4100 Oe) in the as-obtained state. © 2014 American Chemical Society

Wave patterns generated by an axisymmetric obstacle in a two-layer flow

Gravity waves generated by a moving obstacle in a two-layer stratified fluid are investigated. The experimental configuration is three-dimensional with an axisymmetric obstacle which is towed in one of the two layers. The experimental method used in the present study is based on a stereoscopic technique allowing the 3D reconstruction of the interface between the two layers. Investigation into the wave pattern as a function of the Froude number, Fr, based on the relative density of the fluid layers and the velocity of the towed obstacle is presented. Specific attention is paid to the transcritical regime for which Fr is close to one. Potential energy trapped in the wave field patterns is also extracted from the experimental results and is analyzed as a function of both the Froude number, Fr, and the transcritical similarity parameter Γ. In particular, a remarkable increase in the potential energy around Fr = 1 is observed and a scaling allowing to assemble data resulting from different experimental parameters is proposed