97 research outputs found
Investigation into the effect of beam shape on melt pool characteristics using analytical modelling
An established analytical model is used to simulate an extended laser beam. Multiple Gaussian sources are superimposed to form a rectangular beam and results are compared with a single circular Gaussian source model as well as experimental results from a high power diode laser with a rectangular beam. Melt depth, and melt pool profile and progression have been predicted by modelling which are compared with experimental results from melting of Inconel 625. The model produced is shown to give a reasonable prediction of melt pool shape and can be usefully employed to help optimise overlap required for laser surface processing applications. The value of absorptivity used in the model can be used as a fitting parameter to optimise the match between experimental and predicted results
A study on the evolution of the contact angle of small punch creep test of Ductile materials
The work discussed in the present paper reports a novel investigation of the applicability of Chakrabarty's theory, for membrane stretching of a circular blank over a rigid punch, to small punch creep test (SPCT). The Chakrabarty solution was compared with corresponding results obtained by numerical finite element (FE) analyses and experimental tests. The Liu and Murakami creep damage model was used in the FE analyses. The aim of the work is also to improve the understanding of the mechanism governing the deformation and the failure of the specimen and to verify the range of applicability of the CEN Code of Practice CWA 15627, which is based on Chakrabarty's theory. The effects of various parameters, such as the initial thickness of the specimen, the radius of the punch, the load magnitude, the friction coefficient and different plasticity constitutive models, on the variation of the contact angle, θ0, and the central displacement of the punch, Δ, were identified and correlated by fitting equations. The variation of θ0 with Δ, obtained from Chakrabarty's solution was compared with that obtained by FE analyses of the SPCT. When the initial thickness of the specimen increased and the radius of the punch decreased, the FE results, in terms of the variation of θ0 versus Δ, showed to differ from Chakrabarty's solution, therefore new ranges of applicability of the CEN Code of Practice CWA 15627 were determined
A measurement of the tau mass and the first CPT test with tau leptons
We measure the mass of the tau lepton to be 1775.1+-1.6(stat)+-1.0(syst.) MeV
using tau pairs from Z0 decays. To test CPT invariance we compare the masses of
the positively and negatively charged tau leptons. The relative mass difference
is found to be smaller than 3.0 10^-3 at the 90% confidence level.Comment: 10 pages, 4 figures, Submitted to Phys. Letts.
First Measurement of Z/gamma* Production in Compton Scattering of Quasi-real Photons
We report the first observation of Z/gamma* production in Compton scattering
of quasi-real photons. This is a subprocess of the reaction e+e- to
e+e-Z/gamma*, where one of the final state electrons is undetected.
Approximately 55 pb-1 of data collected in the year 1997 at an e+e-
centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been
analysed. The Z/gamma* from Compton scattering has been detected in the
hadronic decay channel. Within well defined kinematic bounds, we measure the
product of cross-section and Z/gamma* branching ratio to hadrons to be
(0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV,
dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60
GeV, dominated by (e)egamma* production, this product is found to be
(4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo
event generators, grc4f and PYTHIA.Comment: 18 pages, LaTeX, 5 eps figures included, submitted to Physics Letters
Measurement of the B0 Lifetime and Oscillation Frequency using B0->D*+l-v decays
The lifetime and oscillation frequency of the B0 meson has been measured
using B0->D*+l-v decays recorded on the Z0 peak with the OPAL detector at LEP.
The D*+ -> D0pi+ decays were reconstructed using an inclusive technique and the
production flavour of the B0 mesons was determined using a combination of tags
from the rest of the event. The results t_B0 = 1.541 +- 0.028 +- 0.023 ps, Dm_d
= 0.497 +- 0.024 +- 0.025 ps-1 were obtained, where in each case the first
error is statistical and the second systematic.Comment: 17 pages, 4 figures, submitted to Phys. Lett.
WW Production Cross Section and W Branching Fractions in e+e- Collisions at 189 GeV
From a data sample of 183 pb^-1 recorded at a center-of-mass energy of roots
= 189 GeV with the OPAL detector at LEP, 3068 W-pair candidate events are
selected. Assuming Standard Model W boson decay branching fractions, the W-pair
production cross section is measured to be sigmaWW = 16.30 +- 0.34(stat.) +-
0.18(syst.) pb. When combined with previous OPAL measurements, the W boson
branching fraction to hadrons is determined to be 68.32 +- 0.61(stat.) +-
0.28(syst.) % assuming lepton universality. These results are consistent with
Standard Model expectations.Comment: 22 pages, 5 figures, submitted to Phys. Lett.
A search for neutral Higgs bosons in the MSSM and models with two scalar field doublets
A search is described for the neutral Higgs bosons h^0 and A^0 predicted by models with two scalar field doublets and, in particular, the Minimal Supersymmetric Standard Model (MSSM). The search in the Z^0 h^0 and h^0 A^0 production channels is based on data corresponding to an integrated luminosity of 25 pb^{-1} from e^+e^- collisions at centre-of-mass energies between 130 and 172GeV collected with the OPAL detector at LEP. The observation of a number of candidates consistent with Standard Model background expectations is used in combination with earlier results from data collected at the Z^0 resonance to set limits on m_h and m_A in general models with two scalar field doublets and in the MSSM. For example, in the MSSM, for tan(beta) > 1, minimal and maximal scalar top quark mixing and soft SUSY-breaking masses of 1 TeV, the 95% confidence level limits m_h > 59.0 GeV and m_A > 59.5 GeV are obtained. For the first time, the MSSM parameter space is explored in a detailed scan.A search is described for the neutral Higgs bosons h^0 and A^0 predicted by models with two scalar field doublets and, in particular, the Minimal Supersymmetric Standard Model (MSSM). The search in the Z^0 h^0 and h^0 A^0 production channels is based on data corresponding to an integrated luminosity of 25 pb^{-1} from e^+e^- collisions at centre-of-mass energies between 130 and 172 GeV collected with the OPAL detector at LEP. The observation of a number of candidates consistent with Standard Model background expectations is used in combination with earlier results from data collected at the Z^0 resonance to set limits on m_h and m_A in general models with two scalar field doublets and in the MSSM. For example, in the MSSM, for tan(beta) > 1, minimal and maximal scalar top quark mixing and soft SUSY-breaking masses of 1 TeV, the 95% confidence level limits m_h > 59.0 GeV and m_A > 59.5 GeV are obtained. For the first time, the MSSM parameter space is explored in a detailed scan
Selection of high temperature materials for concentrated solar power systems: Property maps and experiments
Search for heavy Majorana neutrinos in e±e± and e±μ± final states via WW scattering in pp collisions at √s = 13 TeV with the ATLAS detector
A search for heavy Majorana neutrinos in scattering of same-sign W boson pairs in proton–proton collisions at √s = 13 TeV at the LHC is reported. The dataset used corresponds to an integrated luminosity of 140 fb−1, collected with the ATLAS detector during 2015–2018. The search is performed in final states including a same-sign ee or eμ pair and at least two jets with large invariant mass and a large rapidity difference. No significant excess of events with respect to the Standard Model background predictions is observed. The results are interpreted in a benchmark scenario of the Phenomenological Type-I Seesaw model. New constraints are set on the values of the |VeN|2 and |VeN V*μN| parameters for heavy Majorana neutrino masses between 50 GeV and 20 TeV, where VℓN is the matrix element describing the mixing of the heavy Majorana neutrino mass eigenstate with the Standard Model neutrino of flavour ℓ = e, μ. The sensitivity to the Weinberg operator is investigated and constraints on the effective ee and eμ Majorana neutrino masses are reported. The statistical combination of the ee and eμ channels with the previously published μμ channel is performed
- …