Radiation-induced stable radicals in calcium phosphates: Results of multifrequency epr, ednmr, eseem, and endor studies

This article presents the results of a study of radiation-induced defects in various synthetic calcium phosphate (CP) powder materials (hydroxyapatite—HA and octacalcium phosphate—OCP) by electron paramagnetic resonance (EPR) spectroscopy at the X, Q, and W-bands (9, 34, 95 GHz for the microwave frequencies, respectively). Currently, CP materials are widely used in orthopedics and dentistry owing to their high biocompatibility and physico-chemical similarity with human hard tissue. It is shown that in addition to the classical EPR techniques, other experimental approaches such as ELDOR-detected NMR (EDNMR), electron spin echo envelope modulation (ESEEM), and electronnuclear double resonance (ENDOR) can be used to analyze the electron–nuclear interactions of CP powders. We demonstrated that the value and angular dependence of the quadrupole interaction for14 N nuclei of a nitrate radical can be determined by the EDNMR method at room temperature. The ESEEM technique has allowed for a rapid analysis of the nuclear environment and estimation of the structural positions of radiation-induced centers in various crystal matrices. ENDOR spectra can provide information about the distribution of the nitrate radicals in the OCP structure. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. Published under the CC BY 4.0 license.Authors would like to thank the Russian Foundation for Basic Research, project no. 18-29-11086. Institute of Solid State Physics, University of Latvia as the Center of Excellence received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01–2016-2017- TeamingPhase2 under grant agreement No. 739508, project CAMART2

Crystalline phase detection in glass ceramics by EPR spectroscopy

The advances of EPR spectroscopy for the detection of activators as well as determining their local structure in the crystalline phase of glass ceramics is considered. The feasibility of d-element (Mn²⁺, Cu²⁺) and f-element(Gd³⁺, Eu²⁺) ion probes for the investigation of glass ceramics is discussed. In the case of Mn²⁺, the informationis obtained from the EPR spectrum superhyperfine structure, for Gd³⁺ and Eu²⁺ probes – from the EPR spectrum fine structure, whereas for Cu²⁺ ions the changes in the EPR spectrum shape could be useful. The examples of EPR spectra of the above-mentioned probes in oxyfluoride glass ceramics are illustrated

Low-temperature recombination luminescence of La-doped Ca2_2SnO4_4

Low-temperature ultraviolet-excited photoluminescence (PL) and recombination luminescence (RL) properties of La-doped Ca$_2$SnO$_4$ have been investigated by luminescence, electron paramagnetic resonance (EPR) and optically-detected magnetic resonance (ODMR) techniques. Two PL and RL bands at 340 nm and 450 nm have been observed. PL excitation spectra measurements with a synchrotron source showed a significant difference between the 450 nm and the 340 nm PL bands. The 450 nm band has a long-lasting hyperbolic decay, while the 350 nm band shows a fast decay. Assuming an excitonic nature of the 340 nm band, the band gap of the Ca$_2$SnO$_4$:La has been estimated to be approximately 5.5 eV. ODMR measurements suggest that the low-temperature RL band at 450 nm is caused by tunnelling recombination of electron trap and hole trap centres, and the recombination energy is transferred to Sn$^{2+}$ luminescence centres

Changes in surface free energy and surface conductivity of carbon nanotube/polyimide nanocomposite films induced by UV irradiation

Changes in surface energy and electrical conductivity of polyimide (PI)-based nanocomposite films filled with carbon nanotubes (CNTs) induced by UV exposure are gaining considerable interest in microelectronic, aeronautical, and aerospace applications. However, the underlying mechanism of PI photochemistry and oxidation reactions induced by UV irradiation upon the surface in the presence of CNTs is still not clear. Here, we probed the interplay between CNTs and PIs under UV exposure in the surface properties of CNT/PI nanocomposite films. Changes in contact angles and surface electrical conductivity at the surface of CNT/PI nanocomposite films after UV exposure were measured. The unpaired electron intensity of free radicals generated by UV exposure was monitored by electron paramagnetic resonance. Our study indicates that the covalent interactions between CNTs and radicals generated by UV irradiation on the PI surfaces tailor the surface energy and surface conductivity through anchoring radicals on CNTs. Surprisingly, adding CNTs into PI films exposed to UV leads to antagonistic contributions of dispersion and polar components to the surface energy. The surface electrical conductivity of the CNT/PI nanocomposite films has been improved due to an enhanced hopping behavior with dense π-conjugated CNT sites. To explain the observed changes in surface energy and surface conductivity of CNT/PI nanocomposite films induced by UV exposure, a qualitative model was put forward describing the covalent interactions between UV-induced PI free radicals and CNTs, which govern the chemical nature of surface components. This study is helpful for characterizing and optimizing nanocomposite surface properties by tuning the covalent interactions between components at the nanoscale

Radiation-induced stable radicals in calcium phosphates: Results of multifrequency epr, ednmr, eseem, and endor studies

This article presents the results of a study of radiation-induced defects in various synthetic calcium phosphate (CP) powder materials (hydroxyapatite—HA and octacalcium phosphate—OCP) by electron paramagnetic resonance (EPR) spectroscopy at the X, Q, and W-bands (9, 34, 95 GHz for the microwave frequencies, respectively). Currently, CP materials are widely used in orthopedics and dentistry owing to their high biocompatibility and physico-chemical similarity with human hard tissue. It is shown that in addition to the classical EPR techniques, other experimental approaches such as ELDOR-detected NMR (EDNMR), electron spin echo envelope modulation (ESEEM), and electronnuclear double resonance (ENDOR) can be used to analyze the electron–nuclear interactions of CP powders. We demonstrated that the value and angular dependence of the quadrupole interaction for14 N nuclei of a nitrate radical can be determined by the EDNMR method at room temperature. The ESEEM technique has allowed for a rapid analysis of the nuclear environment and estimation of the structural positions of radiation-induced centers in various crystal matrices. ENDOR spectra can provide information about the distribution of the nitrate radicals in the OCP structure

X-ray diffraction and multifrequency epr study of radiation-induced room temperature stable radicals in octacalcium phosphate

Octacalcium phosphate (OCP) ×Ca8H2(PO4)635H2O] has attracted increasing attention over the last decade as a transient intermediate to the biogenic apatite for bone engineering and in studies involving the processes of pathological calcification. In this work, OCP powders obtained by hydrolysis of dicalcium phosphate dehydrate were subjected to X- and γ-ray irradiation and studied by means of stationary and pulsed electron paramagnetic resonance at 9, 36 and 94 GHz microwave frequencies. Several types of paramagnetic centers were observed in the investigated samples. Their spectroscopic parameters (components of the g and hyperfine tensors) were determined. Based on the extracted parameters, the induced centers were ascribed to H0, CO33-, CO2 - and nitrogen-centered (presumably NO3 2-) radicals. The spectroscopic parameters of the nitrogen-centered stable radical in OCP powders were found to be markedly different from those in hydroxyapatite. According to X-ray diffraction data, c-ray irradiation allowed the phase composition of calcium phosphates to change; all minor phases with the exception of OCP and hydroxyapatite disappeared, while the OCP crystal lattice parameters changed after irradiation. The obtained results could be used for the tracing of mineralization processes from their initiation to completion of the final product, identification of the OCP phase, and to follow the influence of radiation processes on phase composition of calcium phosphates