52 research outputs found
Assessment and control of transition to turbulence in plane Couette flow
Transition to turbulence in shear flows is a puzzling problem regarding the motion of fluids flowing, for example, through the pipe (pipe flow), as in oil pipelines or blood vessels, or confined between two counter-moving walls (plane Couette flow). In this kind of flows, the initially laminar (ordered and layered) state of fluid motion is linearly stable, but turbulent (disordered and swirling) flows can also be observed if a suitable perturbation is imposed. This thesis concerns the assessment of transitional properties of such flows in the uncontrolled and controlled environments allowing for the quantitative comparisons of control strategies aimed at suppressing or trigerring transition to turbulence. Efficient finite-amplitude perturbations typically take the form of small patches of turbulence embedded in the laminar flow and called turbulent spots. Using direct numerical simulations, the nonlinear dynamics of turbulent spots, modelled as exact solutions, is investigated in the transitional regime of plane Couette flow and a detailed map of dynamics encompassing the main features found in transitional shear flows (self-sustained cycles, front propagation and spot splitting) is built. The map represents a quantitative assessment of transient dynamics of turbulent spots as a dependence of the relaminarisation time, i.e. the time it takes for a finite-amplitude perturbation, added to the laminar flow, to decay, on the Reynolds number and the width of a localised perturbation. By applying a simple passive control strategy, sinusoidal wall oscillations, the change in the spot dynamics with respect to the amplitude and frequency of the wall oscillations is assessed by the re-evaluation of the relaminarisation time for few selected localised initial conditions. Finally, a probabilistic protocol for the assessment of transition to turbulence and its control is suggested. The protocol is based on the calculation of the laminarisation probability, i.e. the probability that a random perturbation decays as a function of its energy. It is used to assess the robustness of the laminar flow to finite-amplitude perturbations in transitional plane Couette flow in a small computational domain in the absence of control and under the action of sinusoidal wall oscillations. The protocol is expected to be useful for
a wide range of nonlinear systems exhibiting finite-amplitude instability
Exceptionally strong coupling of defect emission in hexagonal boron nitride to stacking sequences
Van der Waals structures present a unique opportunity for tailoring material
interfaces and integrating photonic functionalities. By precisely manipulating
the twist angle and stacking sequences, it is possible to elegantly tune and
functionalize the electronic and optical properties of layered van der Waals
structures. Among these materials, two-dimensional hexagonal boron nitride
(hBN) stands out for its remarkable optical properties and wide band gap,
making it a promising host for solid state single photon emitters at room
temperature. Previous investigations have demonstrated the observation of
bright single photon emission in hBN across a wide range of wavelengths. In
this study, we unveil an application of van der Waals technology in modulating
their spectral shapes and brightness by carefully controlling the stacking
sequences and polytypes. Our theoretical analysis reveals remarkably large
variations in the Huang-Rhys factors-an indicator of the interaction between a
defect and its surrounding lattice-reaching up to a factor of 3.3 for the same
defect in different stackings. We provide insights into the underlying
mechanism behind these variations, shedding light on the design principles
necessary to achieve rational and precise control of defect emission. This work
paves the way for enhancing defect identification and facilitating the
engineering of highly efficient single photon sources and qubits using van der
Waals materials.Comment: 8 pages, 5 figure
Ultraviolet Quantum Emitters in Hexagonal Boron Nitride from Carbon Clusters
Ultraviolet (UV) quantum emitters in hexagonal boron nitride (hBN) have generated considerable interest due to their outstanding optical response. Recent experiments
have identified a carbon impurity as a possible source of UV single-photon emission. Here, on the basis of first-principles calculations, we systematically evaluate the ability of substitutional carbon defects to develop the UV color centers in hBN. Of 17 defect configurations under
consideration, we particularly emphasize the carbon ring defect (6C), for which the calculated zero-phonon line agrees well the experimental 4.1 eV emission signal. We also compare the optical properties of 6C with those of other relevant defects, thereby outlining the key differences in the emission mechanism. Our findings provide new insights into the strong response of this color center to external perturbations and pave the way to a robust identification of the particular carbon substitutional defects by spectroscopic methods
Dynamics of spatially localized states in transitional plane Couette flow
Unsteady spatially localized states such as puffs, slugs or spots play an important role in transition to turbulence. In plane Couette flow, steady versions of these states are found on two intertwined solution branches describing homoclinic snaking (Schneider et al., Phys. Rev. Lett., vol. 104, 2010, 104501). These branches can be used to generate a number of spatially localized initial conditions whose transition can be investigated. From the low Reynolds numbers where homoclinic snaking is first observed (Re < 175) to transitional ones (Re â 325), these spatially localized states traverse various regimes where their relaminarization time and dynamics are affected by the dynamical structure of phase space. These regimes are reported and characterized in this paper for a 4Ï-periodic domain in the streamwise direction as a function of the two remaining variables: the Reynolds number and the width of the localized pattern. Close to the snaking, localized states are attracted by spatially
localized periodic orbits before relaminarizing. At larger values of the Reynolds number, the flow enters a chaotic transient of variable duration before relaminarizing. Very long chaotic transients (t > 104) can be observed without difficulty for relatively low values of the Reynolds number (Re â 250)
Intramolecular borylation via sequential B-Mes bond cleavage for the divergent synthesis of B,N,B-doped benzo[4]helicenes
Authors thank the Natural Sciences and Engineering Research Council of Canada and the Leverhulme Trust (RPG-2016-47) for financial support. J. A. KnoÌller thanks the Baden WuÌrttemberg Stiftung for a scholarship as well as Queen's and Stuttgart University for enabling this research through the Dual Degree Masters program.New symmetric and unsymmetric B,N,B-doped benzo[4]helicenes 3 - 6a/b have been achieved in good yields, using a three-step process, starting from N(tolyl)3 in a highly divergent manner (7 examples). A borinic acid functionalized 1,4-B,N- anthracene 1 was found to display unprecedented reactivity, acting as a convenient and highly effective precursor for selective formation of bromo substituted B,N,B-benzo[4]helicenes 2a/2b via intramolecular borylation and sequential B-Mes bond cleavage in presence of BBr3. Subsequent reaction of 2a/2b with Ar-Li provided a highly effective toolbox for the preparation of symmetrically/unsymmetrically functionalized B,N,B-helicenes. Their high photoluminescence quantum yields along with the small âEST suggest the potential as thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diodes (OLEDs).PostprintPeer reviewe
A multiscale modeling study of loss processes in block-copolymer-based solar cell nanodevices
Flexible photovoltaic devices possess promising perspectives in opto-electronic technologies, where high mobility and/or large-scale applicability are important. However, their usefulness in such applications is currently still limited due to the low level of optimization of their performance and durability. For the improvement of these properties, a better understanding and control of small-scale annihilation phenomena involved in the photovoltaic process, such as exciton loss and charge carrier loss, is necessary, which typically implicates multiple length- and time-scales. Here, we study the causes for their occurrence on the example of nanostructured diblock- and triblock-copolymer systems by making use of a novel solar-cell simulation algorithm and explore new routes to optimize their photovoltaic properties. A particular focus is set on the investigation of exciton and charge carrier loss phenomena and their dependence on the inter-monomeric interaction strength, chain architecture, and external mechanical loading. Our simulation results reveal that in the regime from low up to intermediate Ï-parameters an increasing number of continuous percolation paths is created. In this parameter range, the internal quantum efficiency (IQE) increases up to a maximum, characterized by a minimum in the number of charge losses due to charge recombination. In the regime of high Ï-parameters both block-copolymer systems form nanostructures with a large number of bottlenecks and dead ends. These lead to a large number of charge losses due to charge recombination, charge trapping, and a deteriorated exciton dissociation, resulting in a significant drop in the IQE. Moreover, we find that the photovoltaic performance of the triblock-copolymer material decreases with increasing mechanical loading, caused by a growing number of charge losses due to charge recombination and charge accumulation. Finally, we demonstrate that the process of charge trapping in defects can be reversed by changing the polarity of the electrodes, which confers these materials the ability to be used as charge storage media
Highly emissive excitons with reduced exchange energy in thermally activated delayed fluorescent molecules
The work was supported by the European Unionâs Horizon 2020 research and innovation program under Grant Agreement N°. 646176 (EXTMOS project). A.P. acknowledges the financial support from the Marie Curie Fellowship (MILORD project, N°. 748042). Computational resources have been provided by the Consortium des Ăquipements de Calcul Intensif (CĂCI), funded by the Fonds de la Recherche Scientifiques de Belgique (F.R.S.-FNRS) under Grant No. 2.5020.11, as well as the Tier-1 supercomputer of the FĂ©dĂ©ration Wallonie-Bruxelles, infrastructure funded by the Walloon Region under the grant agreement n1117545. The St Andrews team would like to thank the Leverhulme Trust (RPG-2016-047) and EPSRC (EP/P010482/1) for financial support.Unlike conventional thermally activated delayed fluorescence chromophores, boron-centered azatriangulene-like molecules combine a small excited-state singlet-triplet energy gap with high oscillator strengths and minor reorganization energies. Here, using highly correlated quantum-chemical calculations, we report this is driven by short-range reorganization of the electron density taking place upon electronic excitation of these multi-resonant structures. Based on this finding, we design a series of Ï-extended boron- and nitrogen-doped nanographenes as promising candidates for efficient thermally activated delayed fluorescence emitters with concomitantly decreased singlet-triplet energy gaps, improved oscillator strengths and core rigidity compared to previously reported structures, permitting both emission color purity and tunability across the visible spectrum.Publisher PDFPeer reviewe
Diamond Surface Functionalization via Visible Light-Driven C-H Activation for Nanoscale Quantum Sensing
Nitrogen-vacancy centers in diamond are a promising platform for nanoscale
nuclear magnetic resonance sensing. Despite significant progress towards using
NV centers to detect and localize nuclear spins down to the single spin level,
NV-based spectroscopy of individual, intact, arbitrary target molecules remains
elusive. NV molecular sensing requires that target molecules are immobilized
within a few nanometers of NV centers with long spin coherence time. The inert
nature of diamond typically requires harsh functionalization techniques such as
thermal annealing or plasma processing, limiting the scope of functional groups
that can be attached to the surface. Solution-phase chemical methods can be
more readily generalized to install diverse functional groups, but they have
not been widely explored for single-crystal diamond surfaces. Moreover,
realizing shallow NV centers with long spin coherence times requires highly
ordered single-crystal surfaces, and solution-phase functionalization has not
yet been shown to be compatible with such demanding conditions. In this work,
we report a versatile strategy to directly functionalize C-H bonds on
single-crystal diamond surfaces under ambient conditions using visible light.
This functionalization method is compatible with charge stable NV centers
within 10 nm of the surface with spin coherence times comparable to the state
of the art. As a proof of principle, we use shallow ensembles of NV centers to
detect nuclear spins from functional groups attached to the surface. Our
approach to surface functionalization based on visible light-driven C-H bond
activation opens the door to deploying NV centers as a broad tool for chemical
sensing and single-molecule spectroscopy
Improving processability and efficiency of Resonant TADF emitters : a design strategy
This work is funded by the EC through the Horizon 2020 Marie Sklodowska-Curie ITN project TADFlife. The St Andrews team would also like to thank the Leverhulme Trust (RPG-2016- 047) and EPSRC (EP/P010482/1) for financial support. Computational resources have been provided by the Consortium des EÌquipements de Calcul Intensif (CEÌCI), funded by the Fonds de la Recherche Scientifiques de Belgique (F.R.S.-FNRS) under Grant No. 2.5020.11, as well as the Tier-1 supercomputer of the FeÌdeÌration Wallonie-Bruxelles, infrastructure funded by the Walloon Region under the grant agreement n1117545. AP acknowledges the financial support from the Marie Curie Fellowship (MILORD project, N°. 748042). DB is a FNRS Research Director. We thank Franck-Julian Kahle for support with data analysis.A new design strategy is introduced to address a persistent weakness with resonance thermally activated delayed fluorescence (R-TADF) emitters to reduce aggregation-caused quenching effects, which we identify as one of the key limiting factors. The emitter Mes3DiKTa shows an improved photoluminescence quantum yield of 80% compared to 75% for the reference DiKTa in 3.5 wt% mCP. Importantly, emission from aggregates, even at high doping concentrations, is eliminated and aggregation-caused quenching is strongly curtailed. For both molecules, triplets are almost quantitatively upconverted into singlets in electroluminescence, despite a significant (~0.21 eV) singlet-triplet energy gap (ÎEST), in line with correlated quantum-chemical calculations, and a slow reverse intersystem crossing. We speculate that the lattice stiffness responsible for the narrow fluorescence and phosphorescence emission spectra also protects the triplets against non-radiative decay. An improved EQEmax of 21.1% for Mes3DIKTa compared to the parent DiKTa (14.7%) and, importantly, reduced efficiency roll- off compared to literature resonance TADF OLEDs, shows the promise of this design strategy for future design of R-TADF emitters for OLED applications.Publisher PDFPeer reviewe
A new multiscale modeling method for simulating the loss processes in polymer solar cell nanodevices
The photoelectric power conversion efficiency of polymer solar cells is till now, compared to conventional inorganic solar cells, still relatively low with maximum values ranging from 7% to 8%. This essentially relates to the existence of exciton and charge carrier loss phenomena, reducing the performance of polymer solar cells significantly. In this paper we introduce a new computer simulation technique, which permits to explore the causes of the occurrence of such phenomena at the nanoscale and to design new photovoltaic materials with optimized opto-electronic properties. Our approach consists in coupling a mesoscopic field-theoretic method with a suitable dynamic Monte Carlo algorithm, to model the elementary photovoltaic processes. Using this algorithm, we investigate the influence of structural characteristics and different device conditions on the exciton generation and charge transport efficiencies in case of a novel nanostructured polymer blend. More specifically, we find that the disjunction of continuous percolation paths leads to the creation of dead ends, resulting in charge carrier losses through charge recombination. Moreover, we observe that defects are characterized by a low exciton dissociation efficiency due to a high charge accumulation, counteracting the charge generation process. From these observations, we conclude that both the charge carrier loss and the exciton loss phenomena lead to a dramatic decrease in the internal quantum efficiency. Finally, by analyzing the photovoltaic behavior of the nanostructures under different circuit conditions, we demonstrate that charge injection significantly determines the impact of the defects on the solar cell performance
- âŠ