Analytical Design of Superelastic Ring Springs for High Energy Dissipation

Classical ring springs are mechanical elements used in industrial applications and in transport for shock absorption and energy dissipation. They are constituted by a stack of internal and external metal rings (typically high strength steel), with tapered surfaces in contact with one another. Under the action of an axial load these surfaces slide, the rings are deformed circumferentially and energy is dissipated due to friction. The main advantages of these springs are the high specific energy stored and the large damping capacity due to sliding friction. Furthermore, the stiffness and damping are independent on the strain rate and the temperature, which limits or avoids the occurrence of any resonance problems. The superelastic materials, characterized by an almost flat stress plateau and large reversible deformation, can be used to replace traditional steels in ring springs giving a significant performance increase. Compared to the traditional version where energy is dissipated only due to friction, in superelastic ring springs there is an increase of the dissipated energy thanks to the internal hysteresis of the material. This paper studies analytically the ring springs in traditional material and in superelastic material, providing equations to dimension these mechanical elements, which enable the designer to customize this useful structural element

Analysis of the link between the redox state and enzymatic activity of the HtrA (DegP) protein from Escherichia coli

Bacterial HtrAs are proteases engaged in extracytoplasmic activities during stressful conditions and pathogenesis. A model prokaryotic HtrA (HtrA/DegP from Escherichia coli) requires activation to cleave its substrates efficiently. In the inactive state of the enzyme, one of the regulatory loops, termed LA, forms inhibitory contacts in the area of the active center. Reduction of the disulfide bond located in the middle of LA stimulates HtrA activity in vivo suggesting that this S-S bond may play a regulatory role, although the mechanism of this stimulation is not known. Here, we show that HtrA lacking an S-S bridge cleaved a model peptide substrate more efficiently and exhibited a higher affinity for a protein substrate. An LA loop lacking the disulfide was more exposed to the solvent; hence, at least some of the interactions involving this loop must have been disturbed. The protein without S-S bonds demonstrated lower thermal stability and was more easily converted to a dodecameric active oligomeric form. Thus, the lack of the disulfide within LA affected the stability and the overall structure of the HtrA molecule. In this study, we have also demonstrated that in vitro human thioredoxin 1 is able to reduce HtrA; thus, reduction of HtrA can be performed enzymatically

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

Correction to: Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

The original version of this article unfortunately contained a mistake

Fibrillation properties of human α(1)-acid glycoprotein

Human a1-acid glycoprotein (AGP) is a positive acute phase plasma protein containing two disulfide bridges. Structural studies have shown that under specific conditions AGP undergoes aggregation. In this study, we analysed the nature of AGP’s aggregates formed under reducing and non-reducing conditions at pH 5.5 and at relatively low temperatures. Thioflavin T and Congo red spectroscopic analyses indicated the presence of cross-b structures in both unreduced and reduced AGP aggregates. In these samples amyloid-like fibrils were detected by transmission electron microscopy. The fibrils are branched and bent and present in very large amount in reduced AGP. Kinetics of AGP fibrillation proceeds without a lag phase and the rate constants of cross-b formation are linearly dependent on AGP concentration and result higher under reducing conditions. The data suggest a possible downhill mechanism of polymerization with a first-order monomer concentration dependence. Bioinformatics tools highlighted an extended region that sheathes one side of the molecule containing aggregation-prone regions. Reducing conditions make the extended region less constricted, allowing greater exposure of aggregation-prone regions, thus explaining the higher propensity of AGP to aggregate and fibrillate

Smart materials: Properties, design and mechatronic applications

This paper describes the properties and the engineering applications of the smart materials, especially in the mechatronics field. Even though there are several smart materials which all are very interesting from the research perspective, we decide to focus the work on just three of them. The adopted criterion privileges the most promising technologies in terms of commercial applications available on the market, namely: magnetorheological fluids, shape memory alloys and piezoelectric materials. Many semi-active devices such as dampers or brakes or clutches, based on magnetorheological fluids are commercially available; in addition, we can trace several applications of piezo actuators and shape memory-based devices, especially in the field of micro actuations. The work describes the physics behind these three materials and it gives some basic equations to dimension a system based on one of these technologies. The work helps the designer in a first feasibility study for the applications of one of these smart materials inside an industrial context. Moreover, the paper shows a complete survey of the applications of magnetorheological fluids, piezoelectric devices and shape memory alloys that have hit the market, considering industrial, biomedical, civil and automotive field

Nitroxides are more efficient inhibitors of oxidative damage to calf skin collagen than antioxidant vitamins

Reactive oxygen species generated upon UV-A exposure appear to play a major role in dermal connective tissue transformations including degradation of skin collagen. Here we investigate on oxidative damage to collagen achieved by exposure to (i) UV-A irradiation and to (ii) AAPH-derived radicals and on its possible prevention using synthetic and natural antioxidants. Oxidative damage was identified through SDS-PAGE, circular dichroism spectroscopy and quantification of protein carbonyl residues. Collagen (2 mg/ml) exposed to UV-A and to AAPH-derived radicals was degraded in a time- and dose-dependent manner. Upon UV-A exposure, maximum damage was observable at 730 kJ/m2 UV-A, found to be equivalent to roughly 2 h of sunshine, while exposure to 5 mM AAPH for 2 h at 50 degrees C lead to maximum collagen degradation. In both cases, dose-dependent protection was achieved by incubation with muM concentrations of nitroxide radicals, where the extent of protection was shown to be dictated by their structural differences whereas the vitamins E and C proved less efficient inhibitors of collagen damage. These results suggest that nitroxide radicals may be able to prevent oxidative injury to dermal tissues in vivo alternatively to commonly used natural antioxidants

Temperature-induced molten globule-like state in human α1-acd glycoprotein: an infrared spectroscopic study.

Despite extensive investigations on thermal denaturation of alpha(1)-acid glycoprotein (AGP) using a variety of techniques, structural features of the folded-unfolded state in terms of residual secondary structures and the structural transitions involved in this process have not been fully characterized. In this study we employed FT-IR spectroscopy to investigate the thermal unfolding and reversibility of temperature-induced changes in AGP. The data revealed a fully reversible beta-sheet-rich protein which exhibits a molten globule-like state, an important protein folding intermediate. 2D-IR COS revealed the sequence of the conformational changes occurring before denaturation and confirmed the formation of this intermediate which was further supported by CD spectroscopy. On account of the similarities in the FT-IR spectra of AGP with those of porcine odorant-binding protein (OBP), homology modeling of AGP using OBP as template was performed. The resemblance of AGP and OBP 3D structures confirmed the similarities of data obtained using FT-IR spectroscopy. Overall, FT-IR spectroscopy appears to be useful for investigating the structural characteristics and stability of proteins whose 3D structures are unavailable and for assessing the molten globule-like state in small beta-sheet-rich proteins

Structure and stability of a rat odorant-binding protein: another brick in the wall

Andrea Scire, Anna Marabotti, Maria Staiano: These authors contributed equally to the work.International audienceThe effect of temperature on the structure of the rat odorant-binding protein was investigated by spectroscopic and in silico methodologies. In particular, in this work, we examined the structural features of the rat OBP-1F by Fourier-transform infrared spectroscopy and molecular dynamics investigations. The obtained spectroscopic results were analyzed using the following three different methods based on the unexchanged amide hydrogens of the protein sample: (1) the analysis of difference spectra; (2) the generalized 2D-IR correlation spectroscopy; (3) the phase diagram method. The three methods indicated that at high temperatures the rOBP-1F structure undergoes a relaxation process involving the protein tertiary organization before undergoing the denaturation and aggregation processes, suggesting the presence of an intermediate state such as a molten globule-like state. Importantly, the proposed analyses represent a general approach that could be applied to the study of protein stability