11 research outputs found
The recycling of sugarcane fiber/polypropylene composites
Mechanical recycling is utilized to reuse waste and obtain other plastic products via the reprocessing of a material in industrial equipment. Natural fiber composites have become more popular in recent years; however, these composites' mechanical behavior remains less well-understood than single polymers’ behavior after recycling. Therefore, the objective of this work was to study the degradation of different sugarcane fibers/polypropylene composites using new grinding and injection processes and to evaluate the mechanical properties of these materials using analysis of variance (ANOVA). This work reveals the mechanical behaviors of recycled natural fiber composites that contain thermal stabilizer additives. Polypropylene composites reinforced with differently treated bagasse and straw fibers (10 and 20 wt%/PP) were obtained through melt mixing using a high-intensity thermokinetic mixer and were subsequently injected. The recycled composites exhibited decreased tensile strength relative to the original composites. However, when thermal stabilizers were added, the mechanical properties were maintained or increased, depending on the fiber and additive types
Carbon fiber-reinforced polymers as a tensile reinforcement of the Pinus elliotti and Manilkara huberi wood species
In wood structures, the elements subjected to bending stresses, such as the beams, present a fracture initiated in the tensile region, and under these conditions, the use of laminated composite materials is presented as an alternative solution in the form of repair or reinforcement. This research aimed to evaluate the influence of the use of carbon fibers laminated composites in tensile reinforcement in the direction parallel to grain of Pinus elliotti and Manilkara huberi wood species. The Viapol two-component epoxy adhesive was used in the lamination and fixation of the unidirectional carbon fiber in the wood species. Ten specimens with no defects (reference) and 10 specimens were prepared for each crack length (25 and 50mm) with and without the reinforcement (60mm × 50mm) by the laminated composite. The tensile tests were performed in accordance with the requirements of the Brazilian standard ABNT NBR 7190 (1997). From the results of the statistical analysis, the use of the carbon fiber composite was able to restore the tensile strength of the cracked samples (partial or total) in relation to samples without defects, demonstrating the potential of the laminates in carbon fibers as an alternative solution in repair for both wood species
Micromechanical analysis of hybrid composites reinforced with unidirectional natural fibres, silica microparticles and maleic anhydride
The work describes the analytical and experimental characterisation of a class of polymeric composites made from epoxy matrix reinforced with unidirectional natural sisal and banana fibres with silica microparticles and maleic anhydride fabricated by manual moulding. The analytical models, ROM rule of mixtures and Halpin-Tsai approach, have been used in conjunction with a Design of Experiments (DOE) analysis from tensile tests carried out on 24 different composites architectures. The following experimental factors were analyzed in this work: type of fibres (sisal and banana fibres), volume fraction of fibres (30% and 50%) and modified matrix phase by adding silica microparticles (0%wt, 20%wt and 33%wt) and maleic anhydride (0%wt and 2%wt). The ROM approach has shown a general good agreement with the experimental data for composites manufactured with 30%vol of natural fibres, which can be attributed to the strong adhesion found between the phases. On the opposite, the semi empirical model proposed by Halpin and Tsai has shown greater fidelity with composites manufactured from 50%vol of natural fibres, which exhibit a weak interfacial bonding. The addition of microsilica and maleic anhydride in the system did not enhance the adhesion between the phases as expected
STRUCTURAL PERFORMANCE OF MODULAR WOOD PANEL OF PLANTED FOREST AND PARTICLEBOARDS BASED ON SUGARCANE BAGASSE
The production and study of alternative material produced with lignocellulosic waste to application in livestock production installation is not common in Brazil, however, is a great sustainable alternative as substitutes of conventional materials, therefore, the present study aimed to evaluate the structural performance of modular panel of homogeneous sugarcane bagasse particleboards and reforestation wood, by numerical and experimental analysis, with application prospect as lateral closure in cattle handling facilities. The evaluation of the modular panel performance was conducted by a numerical simulation by way of finite elements, in laboratory by soft body impact test, in situ, applied to a crowding pen of corral for cattle management. The results indicated good correlation among experimental and theoretical values and the modular panels met satisfactorily the proposed use as a lateral closure for cattle handling facilities
Life cycle assessment of a hot-pressing machine to manufacture particleboards: hotspots, environmental indicators, and solutions
status: publishe
A core rigidity classifier method and a novel approach to account for geometric effects on the elastic properties of sandwich structures
Acoustic absorption and thermal insulation of wood panels: influence of porosity
The development of materials that offer environmental comfort inside buildings, through adequate thermal and acoustic behavior, has been as relevant as the search for raw materials of renewable origin. In this context, this study produced and characterized panels made with Pinus sp. waste materials, which were treated with a copper chrome boric oxide preservative and a castor-oil based polyurethane resin. The physical and mechanical properties of the panels were evaluated according to the ABNT NBR 14810 standard (2013). The panel porosity was investigated by scanning electron microscopy (SEM) and mercury intrusion porosimetry techniques. The sound absorption was analyzed by a reverberation chamber and thermal conductivity by the modified fractionated column method. Samples with a higher pressing pressure (4 MPa) during the manufacturing presented lower thickness swelling and higher mechanical properties in static bending. Panels made with a lower press pressure (2.5 MPa) resulted in a higher porosity volume (55.7%). The more highly porous panels were more acoustically efficient, with a sound absorption coefficient close to 0.8 at 3.2 kHz, and they had a better thermal conductivity performance.The potential of these panels for application where sound absorption and thermal insulation are prioritized is thus observed.14237463757FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP2011/21075-
Comparação entre valores de ensaios experimentais e calculados da resistência ao embutimento da madeira de Pinus taeda L.
To design connections between timber parts with metal dowels (nails or bolts), two phenomena must be considered: bending of the metal dowel and the embedment strength in the wood. The Brazilian Standard ABNT NBR 7190:1997 proposes the methods used in the laboratory tests to determine the embedment strength with the metal dowell and, in the absence of testing, specifies relations to calculate the embedment strength from the compression strength. The aim of this research was to compare the embedment strength values obtained by experimental tests and calculated by the relationships established by the Brazilian Standard ABNT NBR 7190:1997. By the results of the hypothesis tests, it was possible to conclude that the estimate of the embedment strength parallel to the grain proposed by the Brazilian standard ABNT NBR 7190:1997, establishing equivalence with the strength compression results in the same direction, must be effective to the wood species Pinus taeda L., however, the same was not found in the perpendicular direction with respect to the grain, possibly explained by the alpha(e) values in the equation to calculed fe(90