367 research outputs found

    Using an inverse modelling approach to evaluate the water retention in a simple water harvesting technique

    Get PDF
    In arid and semi-arid zones, runoff harvesting techniques are often applied to increase the water retention and infiltration on steep slopes. Additionally, they act as an erosion control measure to reduce land degradation hazards. Nevertheless, few efforts were observed to quantify the water harvesting processes of these techniques and to evaluate their efficiency. In this study, a combination of detailed field measurements and modelling with the HYDRUS-2D software package was used to visualize the effect of an infiltration trench on the soil water content of a bare slope in northern Chile. Rainfall simulations were combined with high spatial and temporal resolution water content monitoring in order to construct a useful dataset for inverse modelling purposes. Initial estimates of model parameters were provided by detailed infiltration and soil water retention measurements. Four different measurement techniques were used to determine the saturated hydraulic conductivity (<I>K</I><sub>sat</sub>) independently. The tension infiltrometer measurements proved a good estimator of the <I>K</I><sub>sat</sub> value and a proxy for those measured under simulated rainfall, whereas the pressure and constant head well infiltrometer measurements showed larger variability. Six different parameter optimization functions were tested as a combination of soil-water content, water retention and cumulative infiltration data. Infiltration data alone proved insufficient to obtain high model accuracy, due to large scatter on the data set, and water content data were needed to obtain optimized effective parameter sets with small confidence intervals. Correlation between the observed soil water content and the simulated values was as high as <I>R</I><sup>2</sup>=0.93 for ten selected observation points used in the model calibration phase, with overall correlation for the 22 observation points equal to 0.85. The model results indicate that the infiltration trench has a significant effect on soil-water storage, especially at the base of the trench

    Pneumococcal carriage in households in Karonga District, Malawi, before and after introduction of 13-valent pneumococcal conjugate vaccination.

    Get PDF
    BACKGROUND Thirteen-valent pneumococcal conjugate vaccine (PCV13) was introduced in Malawi in November 2011 and is offered to infants at 6, 10 and 14 weeks of age as part of routine immunisation. PCV13 is expected to reduce vaccine type (VT) nasopharyngeal carriage, leading to reduced transmission and herd protection. METHODS We compared pneumococcal carriage in rural Karonga District, Malawi, pre-vaccine in 2009-2011 and post-vaccine in 2014 using a combination of cross-sectional and longitudinal analyses. Nasopharyngeal swabs were collected from a cohort of mother-infant pairs and household members <16 years. Pneumococci from 2009 to 2011 were serogrouped using latex agglutination and serotyped by Quellung reaction. In 2014, latex agglutination was used for both steps. Carriage prevalence ratios using prevalence data from before and after vaccine introduction were calculated by log-binomial regression, adjusted for age, seasonality and household composition. Participating infants in 2014 received PCV13 as part of routine immunisation. RESULTS VT carriage prior to PCV-13 introduction was 11.4%, 45.1%, 28.2%, 21.2% and 6.6% for 6-week old infants, 18-week old infants, children 1-4 years, children 5-15 years and mothers, respectively. After vaccine introduction, VT carriage decreased among vaccinated 18-week old infants (adjusted prevalence ratio 0.24 (95%CI 0.08-0.75)), vaccinated children 1-4 years (0.54 (0.33-0.88)), unvaccinated children 5-15 years (0.37 (0.17-0.78)) and mothers (0.34 (0.15-0.79)). No decrease in VT carriage was observed for 6-week old infants too young to be vaccinated (1.07 (0.38-3.02)) and PCV-13 ineligible children 1-4 years (0.84 (0.53-1.33)). Non-VT carriage increased only among vaccinated children 1-4 years (1.58 (1.21-2.06)). CONCLUSIONS There is evidence of reduced VT pneumococcal carriage three years after vaccine introduction in this rural Malawian population with good vaccine coverage using a 3 + 0 schedule. However carriage was sustained among 6-week-old infants and PCV13 ineligible 1-4 year olds, and there was some indication of serotype replacement in vaccinated 1-4 year olds

    Characterization of nuclear material by Neutron Resonance Transmission Analysis

    Get PDF
    The use of Neutron Resonance Transmission Analysis for the characterization of nuclear materials is discussed. The method, which relies on resonance structures in neutron-induced reaction cross sections, can be applied as a non-destructive method to characterise complex nuclear materials such as melted fuel resulting from a severe nuclear accident. Results of a demonstration experiment at the GELINA facility reveal that accurate data can be obtained at a compact facility even in the case of strong overlapping resonances

    NRD Demonstration Experiments at GELINA

    Get PDF
    Neutron Resonance Densitometry (NRD), a non-destructive analysis method, was presented. The method has been developed to quantify special nuclear material (SNM) in debris of melted fuel that will be produced during the decommissioning of the Fukushima Daiichi nuclear power plants. The method is based on Neutron Resonance Transmission Analysis (NRTA) and Neutron Resonance Capture Analysis combined with Prompt Gamma–ray analysis (NRCA/PGA). The quantification of SNM relies on the NRTA results. The basic principles of NRD, which are based on well-established methodologies for neutron resonance spectroscopy, have been explained. To develop NRD for the characterization of rock- and particle like heterogeneous samples a JAEA/JRC collaboration has been established. As part of this collaboration a NRD demonstration workshop was organized at the time-of-flight facility GELINA of the JRC-IRMM in Geel (B). The potential of NRD was demonstrated by measurements on a complex mixture of different elements. It was demonstrated that the elemental composition of an unknown sample predicted by NRTA deviated on average by less than 2% from the declared value. In addition the potential to identify the presence of light elements by NRCA/PGA was shown.JRC.D.4-Standards for Nuclear Safety, Security and Safeguard

    Host-guest and guest-guest interactions between xylene isomers confined in the MIL-47(V) pore system

    Get PDF
    The porous MIL-47 material shows a selective adsorption behavior for para-, ortho-, and meta-isomers of xylenes, making the material a serious candidate for separation applications. The origin of the selectivity lies in the differences in interactions (energetic) and confining (entropic). This paper investigates the xylene-framework interactions and the xylene-xylene interactions with quantum mechanical calculations, using a dispersion-corrected density functional and periodic boundary conditions to describe the crystal. First, the strength and geometrical characteristics of the optimal xylene-xylene interactions are quantified by studying the pure and mixed pairs in gas phase. An extended set of initial structures is created and optimized to sample as many relative orientations and distances as possible. Next, the pairs are brought in the pores of MIL-47. The interaction with the terephthalic linkers and other xylenes increases the stacking energy in gas phase (-31.7 kJ/mol per pair) by roughly a factor four in the fully loaded state (-58.3 kJ/mol per xylene). Our decomposition of the adsorption energy shows various trends in the contributing xylene-xylene interactions. The absence of a significant difference in energetics between the isomers indicates that entropic effects must be mainly responsible for the separation behavior

    Reflecting on mirror mechanisms:motor resonance effects during action observation only present with low-intensity transcranial magnetic stimulation

    Get PDF
    Transcranial magnetic stimulation (TMS) studies indicate that the observation of other people's actions influences the excitability of the observer's motor system. Motor evoked potential (MEP) amplitudes typically increase in muscles which would be active during the execution of the observed action. This 'motor resonance' effect is thought to result from activity in mirror neuron regions, which enhance the excitability of the primary motor cortex (M1) via cortico-cortical pathways. The importance of TMS intensity has not yet been recognised in this area of research. Low-intensity TMS predominately activates corticospinal neurons indirectly, whereas high-intensity TMS can directly activate corticospinal axons. This indicates that motor resonance effects should be more prominent when using low-intensity TMS. A related issue is that TMS is typically applied over a single optimal scalp position (OSP) to simultaneously elicit MEPs from several muscles. Whether this confounds results, due to differences in the manner that TMS activates spatially separate cortical representations, has not yet been explored. In the current study, MEP amplitudes, resulting from single-pulse TMS applied over M1, were recorded from the first dorsal interosseous (FDI) and abductor digiti minimi (ADM) muscles during the observation of simple finger abductions. We tested if the TMS intensity (110% vs. 130% resting motor threshold) or stimulating position (FDI-OSP vs. ADM-OSP) influenced the magnitude of the motor resonance effects. Results showed that the MEP facilitation recorded in the FDI muscle during the observation of index-finger abductions was only detected using low-intensity TMS. In contrast, changes in the OSP had a negligible effect on the presence of motor resonance effects in either the FDI or ADM muscles. These findings support the hypothesis that MN activity enhances M1 excitability via cortico-cortical pathways and highlight a methodological framework by which the neural underpinnings of action observation can be further explored. © 2013 Loporto et al

    Grasp-specific motor resonance is influenced by the visibility of the observed actor

    Get PDF
    Motor resonance is the modulation of M1 corticospinal excitability induced by observation of others' actions. Recent brain imaging studies have revealed that viewing videos of grasping actions led to a differential activation of the ventral premotor cortex depending on whether the entire person is viewed versus only their disembodied hand. Here we used transcranial magnetic stimulation (TMS) to examine motor evoked potentials (MEPs) in the first dorsal interosseous (FDI) and abductor digiti minimi (ADM) during observation of videos or static images in which a whole person or merely the hand was seen reaching and grasping a peanut (precision grip) or an apple (whole hand grasp). Participants were presented with six visual conditions in which visual stimuli (video vs static image), view (whole person vs hand) and grasp (precision grip vs whole hand grasp) were varied in a 2 × 2 × 2 factorial design. Observing videos, but not static images, of a hand grasping different objects resulted in a grasp-specific interaction, such that FDI and ADM MEPs were differentially modulated depending on the type of grasp being observed (precision grip vs whole hand grasp). This interaction was present when observing the hand acting, but not when observing the whole person acting. Additional experiments revealed that these results were unlikely to be due to the relative size of the hand being observed. Our results suggest that observation of videos rather than static images is critical for motor resonance. Importantly, observing the whole person performing the action abolished the grasp-specific effect, which could be due to a variety of PMv inputs converging on M1

    A non-destructive method to determine the neutron production rate of a sample of spent nuclear fuel under standard controlled area conditions

    Get PDF
    A method to determine the neutron production rate of a sample of spent nuclear fuel by means of non-destructive analysis conducted under controlled-area conditions is described, validated and demonstrated. A standard neutron well-counter designed for routine nuclear safeguards applications is applied. The method relies on a transfer procedure that is adapted to the hot-cell facilities at the laboratory for high and medium level activity of the SCK CEN. The sample transfer and measurement procedures are described together with results of Monte Carlo simulations. Experiments with radionuclide sources were carried out at the Joint Research Centre to test the procedures and to determine the performance characteristics of the detection device. Finally, measurements of a segment of a spent nuclear fuel rod were carried out at the SCK CEN to validate and demonstrate the method.JRC.G.2-Standards for Nuclear Safety, Security and Safeguard

    Measurement of the 154Gd(n,?) cross section and its astrophysical implications

    Get PDF
    The neutron capture cross section of 154Gd was measured from 1 eV to 300 keV in the experimental area located 185 m from the CERN n_TOF neutron spallation source, using a metallic sample of gadolinium, enriched to 67% in 154Gd. The capture measurement, performed with four C6D6 scintillation detectors, has been complemented by a transmission measurement performed at the GELINA time-of-flight facility (JRC-Geel), thus minimising the uncertainty related to sample composition. An accurate Maxwellian averaged capture cross section (MACS) was deduced over the temperature range of interest for s process nucleosynthesis modelling. We report a value of 880(50) mb for the MACS at keV, significantly lower compared to values available in literature. The new adopted 154Gd(n,γ) cross section reduces the discrepancy between observed and calculated solar s-only isotopic abundances predicted by s-process nucleosynthesis models.Funded by SCOAP
    • …
    corecore