1,058 research outputs found
Application of impact dampers in vibration control of flexible structures
Impact dampers belong to the category of passive vibration devices used to attenuate the vibration of discrete and continuous systems. An impact damper generally consists of a mass which is allowed to travel freely between two defined stops. Under the right conditions, the vibration of the structure to which the impact damper is attached will cause the mass of the impact damper to strike the structure. Previous analytical and experimental research work on the effect of impact dampers in attenuating the vibration of discrete and continuous systems have demonstrated their effectiveness. It has been shown in this study that impact dampers can increase the intrinsic damping of a lightly-damped flexible structure. The test structure consists of a slender flexible beam supported by a pin-type support at one end and supported by a linear helical flexible spring at another location. Sinusoidal excitation spanning the first three natural frequencies was applied in the horizontal plane. The orientation of the excitation and the test structure in the horizontal plane minimizes the effect of gravity on the behavior of the test structure. The excitation was applied using a linear sine sweep technique. The span of the test structure, the mass of the impact damper, the distance of travel, and the location of the impact damper along the span of the test structure were varied. The damping ratio are estimated for sixty test configurations. The results show that the impact damper significantly increases the damping ratio of the test structure. Statistical analysis of the results using the method of multiple linear regression indicates that a reasonable fit has been accomplished. It is concluded that additional experimental analysis of flexible structures in microgravity environment is needed in order to achieve a better understanding of the behavior of impact damper under conditions of microgravity. Numerical solution of the behavior of flexible structures equipped with impact dampers is also needed to predict stresses and deformations under operating conditions of microgravity in space applications
In-vitro Release Study of Carvedilol Phosphate Matrix Tablets Prepared with Hydroxypropyl Methylcellulose
Purpose: To evaluate the effect of two molecular weight grades of hydroxypropyl methylcellulose on the release characteristics of carvedilol phosphate matrix tablets.Methods: Matrix tablets containing carvedilol phosphate were prepared from 27 formulations in three batch series coded A, B and C, each containing 9 formulations. Each batch incorporated different ratios of two molecular weight grades of hydroxypropyl methylcellulose (Methocel® K4M CR and K15M CR) used as release retarding agents. Microcrystalline cellulose (Avicel PH 101), starch (Sta-Rx 1500) and lactose monohydrate were used as diluents in the formulations while the effect of sodium lauryl sulphate (wetting agent) was studied for some of the formulations. The tablets were characterized for carvedilol phosphate release in both simulated gastric and intestinal fluids. The data were subjected to different models in order to determine their release kinetics and mechanisms.Results: All the batches released more than 50 % of their carvedilol content in 12 h when Methocel® K4M CR and K15M CR constituted 18 % and 15 % of the matrix, respectively. Avicel® PH 101 decreased while Starch 1500 and lactose monohydrate increased drug release. Drug release mechanism was predominantly diffusion.Conclusion: By using varying combinations of two molecular weight grades of hydroxypropyl methylcellulose as the matrix, controlled or sustained release carvedilol tablets of varying release characteristics can be prepared
An assets maintenance-workforce planning problem under uncertainty: A chance constraints assisted simulation-optimization approach
Sensitive spectrophotometric methods for determination of some organophosphorus pesticides in vegetable samples
Three rapid, simple, reproducible and sensitive spectrophotometric methods (A, B and C) are described for the determination of two organophosphorus pesticides, (malathion and dimethoate) in formulations and vegetable samples. The methods A and B involve the addition of an excess of Ce4+ into sulphuric acid medium and the determination of the unreacted oxidant by decreasing the red color of chromotrope 2R (C2R) at a suitable lmax = 528 nm for method A, or a decrease in the orange pink color of rhodamine 6G (Rh6G) at a suitable lmax = = 525 nm. The method C is based on the oxidation of malathion or dimethoate with the slight excess of N-bromosuccinimide (NBS) and the determination of unreacted oxidant by reacting it with amaranth dye (AM) in hydrochloric acid medium at a suitable lmax = 520 nm. A regression analysis of Beer-Lambert plots showed a good correlation in the concentration range of 0.1-4.2 μg mL−1. The apparent molar absorptivity, Sandell sensitivity, the detection and quantification limits were calculated. For more accurate analysis, Ringbom optimum concentration ranges are 0.25-4.0 μg mL−1. The developed methods were successfully applied to the determination of malathion, and dimethoate in their formulations and environmental vegetable samples
Enhanced Water Electrolysis: Effect Of Temperature On The Oxygen Evolution Reaction At Cobalt Oxide Nanoparticles Modified Glassy Carbon Electrodes
Water splitting producing hydrogen and oxygen gases appears promising in view of the increasing need of renewable energy sources and storage strategies. Investigation of stable and highly efficient electrocatalysts for oxygen evolution reaction (OER) is targeted in this study at cobalt oxide nanoparticle modified glassy carbon (nano-CoOx/GC) electrodes. The effect of the preparation (Tp) and measuring temperature (Tm) on the electrocatalytic activity of nano-CoOx/GC towards the OER is investigated under various operating conditions. Linear sweep voltammetry (LSV), cyclic voltammetry (CV) as well as SEM and XRD techniques were used to probe the electrocatalytic and morphological characteristics of nano-CoOx prepared under various conditions. Increasing Tp and/or Tm results in improving the kinetics and electrocatalytic activity of the proposed anodes towards the OER as demonstrated in the value of the onset potential of the OER and the OER currents recorded at a fixed potential. The morphology as well as the surface characterization of the prepared catalyst are reported herein and evaluated
A well-separated pairs decomposition algorithm for k-d trees implemented on multi-core architectures
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.Variations of k-d trees represent a fundamental data structure used in Computational Geometry with numerous applications in science. For example particle track tting in the software of the LHC experiments, and in simulations of N-body systems in the study of dynamics of interacting galaxies, particle beam physics, and molecular dynamics in biochemistry. The many-body tree methods devised by Barnes and Hutt in the 1980s and the Fast Multipole Method introduced in 1987 by Greengard and Rokhlin use variants of k-d trees to reduce the computation time upper bounds to O(n log n) and even O(n) from O(n2). We present an algorithm that uses the principle of well-separated pairs decomposition to always produce compressed trees in O(n log n) work. We present and evaluate parallel implementations for the algorithm that can take advantage of multi-core architectures.The Science and Technology Facilities Council, UK
Understanding factors influencing choices of cyclists and potential cyclists: A case study at the University of Auckland
Like many other cities in the world, Auckland has been very much a car-based city for decades, with a car modal share of almost 80%. Promoting the use of active modes, including walking and cycling, is no doubt one of the key strategies that should be considered in transport planning. To help transform Auckland into a bicycle-friendly city, our first step is to determine the motivators and deterrents to cycling. This study has two components. We first performed a comprehensive literature review of the lessons learnt from international experience, focussing on what factors were found to have significant influence on the decision to use bicycles as a mode of transport. Based on the findings, we designed a web-based survey to identify the factors influencing the decision to commute by bicycle or not, as well as cyclists’ and potential cyclists’ route choice criteria. A pilot survey was conducted at the University of Auckland as a case study and the survey results were consistent with our findings from the literature review. We conclude that there are five main factors missing in Auckland in terms of encouraging cycling, namely: (1) safety; (2) a well-connected network of cycleways; (3) convenience; (4) policies to discourage car use; and (5) a good public transportation system integrated with cycling facilities
Efficacy and safety of statin treatment for cardiovascular disease: a network meta-analysis of 170 255 patients from 76 randomized trials
Background: Statins represent the largest selling class of cardiovascular drug in the world. Previous randomized trials (RCTs) have demonstrated important clinical benefits with statin therapy. Aim: We combined evidence from all RCTs comparing a statin with placebo or usual care among patients with and without prior coronary heart disease (CHD) to determine clinical outcomes. Design: We searched independently, in duplicate, 12 electronic databases (from inception to August 2010), including full text journal content databases, to identify all statin versus inert control RCTs. We included RCTs of any statin versus any non-drug control in any populations. We abstracted data in duplicate on reported major clinical events and adverse events. We performed a random-effects meta-analysis and meta-regression. We performed a mixed treatment comparison using Bayesian methods. Results: We included a total of 76 RCTs involving 170 255 participants. There were a total of 14 878 deaths. Statin therapy reduced all-cause mortality, Relative Risk (RR) 0.90 [95% confidence interval (CI) 0.86-0.94, P ≤ 0.0001, I 2 = 17%]; cardiovascular disease (CVD) mortality (RR 0.80, 95% CI 0.74-0.87, P < 0.0001, I 2 = 27%); fatal myocardial infarction (MI) (RR 0.82, 95% CI 0.75-0.91, P < 0.0001, I 2 = 21%); non-fatal MI (RR 0.74, 95% CI 0.67-0.81, P ≤ 0.001, I 2 = 45%); revascularization (RR 0.76, 95% CI 0.70-0.81, P ≤ 0.0001); and a composite of fatal and non-fatal strokes (0.86, 95% CI 0.78-0.95, P = 0.004, I 2 = 41%). Adverse events were generally mild, but 17 RCTs reported on increased risk of development of incident diabetes [Odds Ratio (OR) 1.09; 95% CI 1.02-1.17, P = 0.001, I 2 = 11%]. Studies did not yield important differences across populations. We did not find any differing treatment effects between statins. Discussion: Statin therapies offer clear benefits across broad populations. As generic formulations become more available efforts to expand access should be a priorit
Risk communication in tables versus text: a registered report randomized trial on 'fact boxes'.
identifying effective summary formats is fundamental to multiple fields including science communication, systematic reviews, evidence-based policy and medical decision-making. This study tested whether table or text-only formats lead to better comprehension of the potential harms and benefits of different options, here in a medical context. pre-registered, longitudinal experiment: between-subjects factorial 2 (message format) × 2 topic (therapeutic or preventative intervention) on comprehension and later recall (CONSORT-SPI 2018). longitudinal online survey experiment. 2305 census-matched UK residents recruited through the survey panel firm YouGov. comprehension of harms and benefits and knowledge recall after six weeks. fact boxes-simple tabular messages-led to more comprehension (d = 0.39) and slightly more knowledge recall after six weeks (d = 0.12) compared to the same information in text. These patterns of results were consistent between the two medical topics and across all levels of objective numeracy and education. Fact boxes were rated as more engaging than text, and there were no differences between formats in treatment decisions, feeling informed or trust. the brief table format of the fact box improved the comprehension of harms and benefits relative to the text-only control. Effective communication supports informed consent and decision-making and brings ethical and practical advantages. Fact boxes and other summary formats may be effective in a wide range of communication contexts
Curricula for teaching the content of clinical practice guidelines to family medicine and internal medicine residents in the US: a survey study
- …