Acoustic interactions between an altitude test facility and jet engine plumes: Theory and experiments

The overall objective of the described effort was to develop an understanding of the physical mechanisms involved in the flow/acoustic interactions experienced in full-scale altitude engine test facilities. This is done by conducting subscale experiments and through development of a theoretical model. Model cold jet experiments with an axisymmetric convergent nozzle are performed in a test setup that stimulates a supersonic jet exhausting into a cylindrical diffuser. The measured data consist of detailed flow visualization data and acoustic spectra for a free and a ducted plume. It is shown that duct resonance is most likely responsible by theoretical calculations. Theoretical calculations also indicate that the higher discrete tones observed in the measurements are related to the screech phenomena. Limited experiments on the sensitivity of a free 2-D, C-D nozzle to externally imposed sound are also presented. It is shown that a 2-D, C-D nozzle with a cutback is less excitable than a 2-D C-D nozzle with no cutback. At a pressure ratio of 1.5 unsteady separation from the diverging walls of the nozzle is noticed. This separation switches from one wall to the opposite wall thus providing an unsteady deflection of the plume. It is shown that this phenomenon is related to the venting provided by the cutback section

Tone-excited jet: Theory and experiments

A detailed study to understand the phenomenon of broadband jet-noise amplification produced by upstream discrete-tone sound excitation has been carried out. This has been achieved by simultaneous acquisition of the acoustic, mean velocity, turbulence intensities, and instability-wave pressure data. A 5.08 cm diameter jet has been tested for this purpose under static and also flight-simulation conditions. An open-jet wind tunnel has been used to simulate the flight effects. Limited data on heated jets have also been obtained. To improve the physical understanding of the flow modifications brought about by the upstream discrete-tone excitation, ensemble-averaged schlieren photographs of the jets have also been taken. Parallel to the experimental study, a mathematical model of the processes that lead to broadband-noise amplification by upstream tones has been developed. Excitation of large-scale turbulence by upstream tones is first calculated. A model to predict the changes in small-scale turbulence is then developed. By numerically integrating the resultant set of equations, the enhanced small-scale turbulence distribution in a jet under various excitation conditions is obtained. The resulting changes in small-scale turbulence have been attributed to broadband amplification of jet noise. Excellent agreement has been found between the theory and the experiments. It has also shown that the relative velocity effects are the same for the excited and the unexcited jets

Vacancy-mediated hydrogen desorption in NaAlH4

First-principles calculations based on density functional theory are carried out to understand the mechanisms responsible for hydrogen desorption from Ti-doped sodium-alanate (NaAlH4). While the energy needed to remove a hydrogen atom from NaAlH4 with Ti substituted either at the Na site or at Al site is found to be significantly lower than that from the pristine NaAlH4, the presence of Na vacancies is shown to play an even larger role: It is not only an order of magnitude smaller than that from Ti-doped sodium-alanate, but the removal of hydrogen associated with a Na vacancy is exothermic with respect to formation of H2 molecule. Furthermore, we show that the unusual stabilization of the magic AlH3 cluster in the vacancy containing sodium-alanate is responsible for this diminished value of the hydrogen-removal energy. It is suggested that this role of vacancies can be exploited in the design and synthesis of complex light-metal hydrides suitable for hydrogen storage

Developing natural resource models using the object modeling system: feasibility and challenges

International audienceCurrent challenges in natural resource management have created demand for integrated, flexible, and easily parameterized hydrologic models. Most of these monolithic models are not modular, thus modifications (e.g., changes in process representation) require considerable time, effort, and expense. In this paper, the feasibility and challenges of using the Object Modeling System (OMS) for natural resource model development will be explored. The OMS is a Java-based modeling framework that facilitates simulation model development, evaluation, and deployment. In general, the OMS consists of a library of science, control, and database modules and a means to assemble the selected modules into an application-specific modeling package. The framework is supported by data dictionary, data retrieval, GIS, graphical visualization, and statistical analysis utility modules. Specific features of the OMS that will be discussed include: 1) how to reduce duplication of effort in natural resource modeling; 2) how to make natural resource models easier to build, apply, and evaluate; 3) how to facilitate long-term maintainability of existing and new natural resource models; and 4) how to improve the quality of natural resource model code and ensure credibility of model implementations. Examples of integrating a simple water balance model and a large monolithic model into the OMS will be presented

Resiliently evolving supply-demand networks

Peer reviewedPublisher PD

Dehydrogenation from 3d-transition-metal-doped NaAlH4: Prediction of catalysts

A fundamental understanding of the role of catalysts in improving the kinetics and thermodynamics of hydrogen sorption in NaAlH4 is the key for using this material in hydrogen storage. The authors present a systematic theoretical study of energies needed to desorb hydrogen in 3dtransition metal (Sc–Cu)-doped NaAlH4. They show that Cr and Fe atoms can be far more effective catalysts than Ti in desorbing hydrogen. The role of the 3d metal atoms in improving the thermodynamics of dehydrogenation is attributed to a significant shortening of the bond length with neighboring Al atoms

ROLE OF AGNI KARMA IN SNAYU VIKARA W.S.R. TO TENNIS ELBOW

The Tennis Elbow is likely to be the most common insertional tendinopathy of the human body and is found to be associated with some particular occupations and life style. No such disease has been mentioned in the Ayurvedic text. Here in the OPD of R.G.G.P.G.A.C. & Hospital, we have a very good no. of patients of Tennis Elbow, who dont get relief by the conservative management and also do not want to go for Local anesthetic and hydrocortisone. And also it is found that Local anesthetic and hydrocortisone is not a standard treatment for these patients and the surgery is beyond the capacity of the patients of a developing country like ours and also has its own risk. In Sushruta samhita, Agnikarma has been mentioned for disorders of Snayu (ligaments and tendons), Asthi (bone), Sandhi (joints). In Ayurveda, Snayu Vikara can be correlated with the condition of tennis elbow. This therapy provided considerable relief in pain and movement of the elbow joint. Therefore, a study has been designed to understand this disease on Ayurvedic principles and to establish a standard treatment, which can cure this disease or provide long term relief and within the reach of common man and without any side effect

Analysis of the loop length distribution for the negative weight percolation problem in dimensions d=2 through 6

We consider the negative weight percolation (NWP) problem on hypercubic lattice graphs with fully periodic boundary conditions in all relevant dimensions from d=2 to the upper critical dimension d=6. The problem exhibits edge weights drawn from disorder distributions that allow for weights of either sign. We are interested in in the full ensemble of loops with negative weight, i.e. non-trivial (system spanning) loops as well as topologically trivial ("small") loops. The NWP phenomenon refers to the disorder driven proliferation of system spanning loops of total negative weight. While previous studies where focused on the latter loops, we here put under scrutiny the ensemble of small loops. Our aim is to characterize -using this extensive and exhaustive numerical study- the loop length distribution of the small loops right at and below the critical point of the hypercubic setups by means of two independent critical exponents. These can further be related to the results of previous finite-size scaling analyses carried out for the system spanning loops. For the numerical simulations we employed a mapping of the NWP model to a combinatorial optimization problem that can be solved exactly by using sophisticated matching algorithms. This allowed us to study here numerically exact very large systems with high statistics.Comment: 7 pages, 4 figures, 2 tables, paper summary available at http://www.papercore.org/Kajantie2000. arXiv admin note: substantial text overlap with arXiv:1003.1591, arXiv:1005.5637, arXiv:1107.174

Relativity and the lead-acid battery

The energies of the solid reactants in the lead-acid battery are calculated ab initio using two different basis sets at non-relativistic, scalar relativistic, and fully relativistic levels, and using several exchange-correlation potentials. The average calculated standard voltage is 2.13 V, compared with the experimental value of 2.11 V. All calculations agree in that 1.7-1.8 V of this standard voltage arise from relativistic effects, mainly from PbO2 but also from PbSO4