Theoretical Antecedent Of Customer Relationship Management Of Banks In India

This paper has attempted to study the theoretical antecedents of CRM in banks and validate the instrument scale for CRM especially for customer perspective. The researcher has developed the hypothetical model of CRM Practices for banks. Due to insufficient literature in CRM model development study, the researcher has concentrated universal study to focus and form the study conundrum.  The research design of the present study is both descriptive and empirical in nature. The sample was identified with the help of online sample service portal. The study data collected with the sample size of 384 with judgment sampling method. At the time of analyzing the data for envisage the results the researcher applies training and hold out method was adopted for better results. To achieve the validity aspects of scale used for this study evaluated with factor analysis. Both factor analysis methods were adopted. To check the existing theory latent construct EFA is conducted and its results validated through CFA. At the end of the process the researcher offers recommendation for better development and practices for CRM in banks of India

The Effect of Adding Stiffener on Deflection of Loading Arm by Using BEM & FEM

In this study we are concerned to improve the deflection of the loading arm with new suggested style , where the BEM techniques has been used to estimate a deflection at each distance (x) for the main part of loading arm pipe (3'') , thereafter a simplified stiffener has been added to optimize a moment of inertia of this main part thereby the deflection will be better , for this purpose a case study has been considered according to international standard for the pipe specification that  investigated to illustrate the goal of this work, adding to this ANSYS  program  has been used to verify the calculation

Study of chemical and physical parameters affected on purification of water from inorganic contaminants

The ability to remove perchlorate anions was investigated by the adsorption technique in a laboratory scale and by a batch type unit from contaminated aqueous solutions prepared at specific concentrations. The adsorption process was carried out using banana peels, which were chosen as an available, cheap, and low-cost adsorption media. The studied operating conditions in the treatment process were the acidic function, shaking speed, contact time, temperature, in addition to the initial concentration of perchlorate, which ranging from 1-10, 100-400 rpm, 10-180 min, 20-50 ºC, 50-1000 ppb respectively, while the dose of adsorbent media ranged between 0.5-6 g and the particle size ranged from 0-Pan. The experimental results showed that the removal efficiency of perchlorate changes directly with the shaking speed, contact time, particle size and the dose of adsorbent, while it was inversely with the remaining variables for certain levels. Thus, two types of contaminants were disposed of simultaneously in a beneficial, and eco- friendly manner, reaching to Zero Residue Level (ZRL)

MARKETING OF GREEN PRODUCTS AND ITS UNDERLYING PRACTICES

According to the American marketing Association green marketing is the marketing of products that are presumed to be environmentally safe. Every company has its own favorite marketing mix. Companies that develop new and improved products and services with environment inputs in mind give themselves access to new markets, increase their profit sustainability, and enjoy a competitive advantage over the companies which are not concerned for the environment. This study discusses the manufacturers green marketing practices and analyze the respondents’ views about Green Marketing Practices. The researcher has selected 149 units, as samples selected through Proportionate Stratified Random sampling method. The researcher uses the interview schedule instrument to collect the data from the respondents. The main objectives of the study is consists, to know the awareness level of respondents about green marketing practices and which factor more accounted to adopt green marketing practices into their business. Therefore, to know the perception level on the green marketing practices; There are 30 statements observed by the researcher which are relevant and accounted for green marketing practices. The factor analysis technique applied for the purpose of extracting the latent factors accounted for green marketing practices. From the results of factor analysis, “business ethics” factor is high loading factor to influence the sampled respondents to adopt green marketing practices. Another thing should be noted that most of the respondents in the study very aware of green marketing and its practices. Finally the researcher offers suggestion for improvement of green marketing practices

Where traditional drug discovery meets modern technology in the quest for new drugs

Identifying novel compounds or improving bioavailability of drugs requires extensive screening, in vitro and in vivo testing and subsequent commercialisation. Traditional methods can be labour intensive and time-consuming. Use of modern technologies can reduce these challenges and is best achieved through collaboration with researchers specialising in different research fields. The range of research activities carried out in our lab is outlined and demonstrates the diversity of techniques used in our drug discovery programme

Visible light communication using new Flip-FBMC modulation system technique

Filter bank multi-carrier (FBMC) modulation in the visible light communication (VLC) system is one of the most promising modulation systems in optical wireless communications (OWC), especially in 5G and 6G future applications. FBMC has a wide bandwidth compared to other modulation systems. One of the highest degree essential conditions for utilising the signal in VLC is that the signal is real positive, the signal is agreeable with intensity modulation/direct detection (IM/DD), where Hermitian symmetry (H.S) is utilised to get a real signal (RE) and to be unipolar direct current (DC)-bias is used. Here the challenge arises as this method increases complicating, due to the modulation of the N number of frequency symbols, these symbols need 2N inverse fast fourier transform (IFFT) and fast fourier transform (FFT), in addition to energy consumption. This research focused on the time domain and not the frequency domain by using the traditional complex FBMC generation signal, and to obtain the RE signal by placing the RE signal side by side with the imaginary signal (IMs) in a row, and then using new Flip-FBMC technology, which saves more energy. The proposed technologies provide approximately 57% of the number of IFFT/FFT. The use of Flip-FBMC technology consumes less energy than traditional technologies with better bit error rate (BER) performance

Current Situation of Tetranychus urticae (Acari: Tetranychidae) in Northern Africa: The Sustainable Control Methods and Priorities for Future Research

In North Africa, Tetranychus urticae Koch, 1836 represents one of the most destructive generalists among mite herbivores. Unfortunately, it is a source of important annual casualties in crop production. It is a phytophagous mite that can feed on hundreds of host plants and produces significant damage. The control of T. urticae in North Africa has been principally based on acaricide sprays. However, new alternative methods have shown effective results, such as artificial ultraviolet-B, natural enemies, and the introduction of new genetic methods. This review aims to present a synthesis of information surrounding control methods of T. urticae in North Africa. We highlight the principal findings of previous studies. Then, we discuss current control methods and propose new innovative research and sustainable approaches to controlling this pest. The control method can potentially extrapolate in North African regions due to its positive ecological results. Further, studies proved the use of natural enemies, myco-metabolites, bacteria metabolites, and the introduction of a genetic method in an integrated long-term sustainable program that can successfully defeat the populations of T. urticae. We also discuss high-priority research guidelines to investigate new sustainable management strategies. Setting up an integrated long-term ecological monitoring program in different Northwest African countries and incorporating new technologies into monitoring programs is an urgent need to fight this devastating pest

Current Situation of Tetranychus urticae (Acari : Tetranychidae) in Northern Africa: The Sustainable Control Methods and Priorities for Future Research

In North Africa, Tetranychus urticae Koch, 1836 represents one of the most destructive generalists among mite herbivores. Unfortunately, it is a source of important annual casualties in crop production. It is a phytophagous mite that can feed on hundreds of host plants and produces significant damage. The control of T. urticae in North Africa has been principally based on acaricide sprays. However, new alternative methods have shown effective results, such as artificial ultraviolet-B, natural enemies, and the introduction of new genetic methods. This review aims to present a synthesis of information surrounding control methods of T. urticae in North Africa. We highlight the principal findings of previous studies. Then, we discuss current control methods and propose new innovative research and sustainable approaches to controlling this pest. The control method can potentially extrapolate in North African regions due to its positive ecological results. Further, studies proved the use of natural enemies, myco-metabolites, bacteria metabolites, and the introduction of a genetic method in an integrated long-term sustainable program that can successfully defeat the populations of T. urticae. We also discuss high-priority research guidelines to investigate new sustainable management strategies. Setting up an integrated long-term ecological monitoring program in different Northwest African countries and incorporating new technologies into monitoring programs is an urgent need to fight this devastating pest.Peer reviewe

Current Situation of Tetranychus urticae (Acari: Tetranychidae) in Northern Africa: The Sustainable Control Methods and Priorities for Future Research

In North Africa, Tetranychus urticae Koch, 1836 represents one of the most destructive generalists among mite herbivores. Unfortunately, it is a source of important annual casualties in crop production. It is a phytophagous mite that can feed on hundreds of host plants and produces significant damage. The control of T. urticae in North Africa has been principally based on acaricide sprays. However, new alternative methods have shown effective results, such as artificial ultraviolet-B, natural enemies, and the introduction of new genetic methods. This review aims to present a synthesis of information surrounding control methods of T. urticae in North Africa. We highlight the principal findings of previous studies. Then, we discuss current control methods and propose new innovative research and sustainable approaches to controlling this pest. The control method can potentially extrapolate in North African regions due to its positive ecological results. Further, studies proved the use of natural enemies, myco-metabolites, bacteria metabolites, and the introduction of a genetic method in an integrated long-term sustainable program that can successfully defeat the populations of T. urticae. We also discuss high-priority research guidelines to investigate new sustainable management strategies. Setting up an integrated long-term ecological monitoring program in different Northwest African countries and incorporating new technologies into monitoring programs is an urgent need to fight this devastating pest

Cloud Computing in VANETs: Architecture, Taxonomy, and Challenges

Cloud Computing in VANETs (CC-V) has been investigated into two major themes of research including Vehicular Cloud Computing (VCC) and Vehicle using Cloud (VuC). VCC is the realization of autonomous cloud among vehicles to share their abundant resources. VuC is the efficient usage of conventional cloud by on-road vehicles via a reliable Internet connection. Recently, number of advancements have been made to address the issues and challenges in VCC and VuC. This paper qualitatively reviews CC-V with the emphasis on layered architecture, network component, taxonomy, and future challenges. Specifically, a four-layered architecture for CC-V is proposed including perception, co-ordination, artificial intelligence and smart application layers. Three network component of CC-V namely, vehicle, connection and computation are explored with their cooperative roles. A taxonomy for CC-V is presented considering major themes of research in the area including design of architecture, data dissemination, security, and applications. Related literature on each theme are critically investigated with comparative assessment of recent advances. Finally, some open research challenges are identified as future issues. The challenges are the outcome of the critical and qualitative assessment of literature on CC-V