A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding

The final publication is available at Springer via http://dx.doi.org/10.1007/s12289-015-1225-zThis paper addresses the numerical simulation of void formation and transport during mold filling in Resin Transfer Molding (RTM). The saturation equation, based on a two-phase flow model resin/air, is coupled with Darcy s law and mass conservation to simulate the unsaturated filling flow that takes place in a RTM mold when resin is injected through the fiber bed. These equations lead to a system composed of an advection diffusion equation for saturation including capillary effects and an elliptic equation for pressure taking into account the effect of air residual saturation. The model introduces the relative permeability as a function of resin saturation. When capillary effects are omitted, the hyperbolic nature of the saturation equation and its strong coupling with Darcy equation through relative permeability represent a challenging numerical issue. The combination of the constitutive physical laws relating permeability to saturation with the coupled system of the pressure and saturation equations allows predicting the saturation profiles. The model was validated by comparison with experimental data obtained for a fiberglass reinforcement injected in a RTM mold at constant flow rate. The saturation measured as a function of time during the resin impregnation of the fiber bed compared very well with numerical predictions.The authors acknowledge financial support of the Spanish Government (Projects DPI2010-20333 and DPI2013-44903-R-AR), of the National Science and Research Council of Canada (NSERC) and of the Canada Reseach Chair (CRC) program.Gascón Martínez, ML.; García Manrique, JA.; Lebel, F.; Ruiz, E.; Trochu, F. (2016). A two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding. International Journal of Material Forming. 9(2):229-239. doi:10.1007/s12289-015-1225-zS22923992Patel N, Lee LJ (1996) Modeling of void formation and removal in liquid composite molding. Part I: wettability analysis. Polym Compos 17(1):96–103Ruiz E, Achim V, Soukane S, Trochu F, Bréard J (2006) Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites. Compos Sci Technol 66(3–4):475–486Trochu F, Ruiz E, Achim V, Soukane S (2006) Advanced numerical simulation of liquid composite molding for process analysis and optimization. Compos A: Appl Sci Manuf 37(6):890–902Park CH, Lee W (2011) Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review. J Reinf Plast Compos 30(11):957–977Pillai KM (2004) Modeling the unsaturated flow in liquid composite molding processes: a review and some thoughts. J Compos Mater 38(23):2097–2118Breard J, Saouab A, Bouquet G (2003) Numerical simulation of void formation in LCM. Compos A: Appl Sci Manuf 34:517–523Breard J, Henzel Y, Trochu F, Gauvin R (2003) Analysis of dynamic flows through porous media. Part I: comparison between saturated and unsaturated flows in fibrous reinforcements. Polym Compos 24(3):391–408Parnas RS, Phelan FR Jr (1991) The effect of heterogeneous porous media on mold filling in Resin Transfer Molding. SAMPE Q 22(2):53–60Parseval DY, Pillai KM, Advani SG (1997) A simple model for the variation of permeability due to partial saturation in dual scale porous media. Transp Porous Media 27(3):243–264Pillai KM (2002) Governing equations for unsaturated flow through woven fiber mats. Part 1. Isothermal flows. Compos A: Appl Sci Manuf 33(7):1007–1019Simacek P, Advani SG (2003) A numerical model to predict fiber tow saturation during Liquid Composite Molding. Compos Sci Technol 63:1725–1736García JA, Gascón L, Chinesta F (2010) A flux limiter strategy for solving the saturation equation in RTM process simulation. Compos A: Appl Sci Manuf 41:78–82Chui WK, Glimm J, Tangerman FM, Jardine AP, Madsen JS, Donnellan TM, Leek R (1997) Process modeling in Resin Transfer Molding as a method to enhance product quality. SIAM Rev 39(4):714–727Nordlund M, Michaud V (2012) Dynamic saturation curve measurement for resin flow in glass fibre reinforcement. Compos A: Appl Sci Manuf 43:333–343García JA, Ll G, Chinesta F (2003) A fixed mesh numerical method for modelling the flow in liquid composites moulding processes using a volume of fluid technique. Comput Methods Appl Mech Eng 192(7–8):877–893García JA, Ll G, Chinesta F, Trochu F, Ruiz E (2010) An efficient solver of the saturation equation in liquid composite molding processes. Int J Mater Form 3(2):1295–1302Lebel F (2012) Contrôle de la fabrication des composites par injection sur renforts. École Polytechnique de Montréal, CanadaVan Genuchten MT (1980) Closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Sci Soc Am J 44(5):892–898Buckley SE, Leverett MC (1942) Mechanism of fluid displacement in sands. Pet Trans AWME 146:107–116Lundstrom TS, Gebart BR (1994) Influence from process parameters on void formation in Resin Transfer Molding. Polym Compos 15(1):25–33Lundstrom TS (1997) Measurement of void collapse during Resin Transfer Molding. Compos A: Appl Sci Manuf 28(3):201–214Lundstrom TS, Frishfelds V, Jakovics A (2010) Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry. Compos A: Appl Sci Manuf 41:83–92Lebel F, Fanaei A, Ruiz E, Trochu F (2012) Experimental characterization by fluorescence of capillary flows in the fiber tows of engineering fabrics. Open J Inorg Non-Metallic Mater 2(3):25–45Brooks RH, Corey AT (1964) Hydraulic properties of porous media. Colorado State University. Hydrology Papers 1–37Corey AT (1954) The interrelation between gas and oil relative permeabilities. Prod Monthly 19(1):38–4

Bezielle Selectively Targets Mitochondria of Cancer Cells to Inhibit Glycolysis and OXPHOS

Bezielle (BZL101) is a candidate oral drug that has shown promising efficacy and excellent safety in the early phase clinical trials for advanced breast cancer. Bezielle is an aqueous extract from the herb Scutellaria barbata. We have reported previously that Bezielle was selectively cytotoxic to cancer cells while sparing non-transformed cells. In tumor, but not in non-transformed cells, Bezielle induced generation of ROS and severe DNA damage followed by hyperactivation of PARP, depletion of the cellular ATP and NAD, and inhibition of glycolysis. We show here that tumor cells' mitochondria are the primary source of reactive oxygen species induced by Bezielle. Treatment with Bezielle induces progressively higher levels of mitochondrial superoxide as well as peroxide-type ROS. Inhibition of mitochondrial respiration prevents generation of both types of ROS and protects cells from Bezielle-induced death. In addition to glycolysis, Bezielle inhibits oxidative phosphorylation in tumor cells and depletes mitochondrial reserve capacity depriving cells of the ability to produce ATP. Tumor cells lacking functional mitochondria maintain glycolytic activity in presence of Bezielle thus supporting the hypothesis that mitochondria are the primary target of Bezielle. The metabolic effects of Bezielle towards normal cells are not significant, in agreement with the low levels of oxidative damage that Bezielle inflicts on them. Bezielle is therefore a drug that selectively targets cancer cell mitochondria, and is distinguished from other such drugs by its ability to induce not only inhibition of OXPHOS but also of glycolysis. This study provides a better understanding of the mechanism of Bezielle's cytotoxicity, and the basis of its selectivity towards cancer cells

Qualitative study on the implementation of professional pharmacy services in Australian community pharmacies using framework analysis

Abbreviations: BCT, Behavioural change techniques taxonomy; BCW, Behavioural change wheel; CFIR, Consolidated framework for implementation research; EPOC, Cochrane effective practice and organisation of care; FISpH, Framework for the implementation of services in pharmacy; GIF, Generic implementation framework; KPI, Key performance indicator; TDF, Theoretical domains frameworkBackground: Multiple studies have explored the implementation process and influences, however it appears there is no study investigating these influences across the stages of implementation. Community pharmacy is attempting to implement professional services (pharmaceutical care and other health services). The use of implementation theory may assist the achievement of widespread provision, support and integration. The objective was to investigate professional service implementation in community pharmacy to contextualise and advance the concepts of a generic implementation framework previously published. Methods: Purposeful sampling was used to investigate implementation across a range of levels of implementation in community pharmacies in Australia. Twenty-five semi-structured interviews were conducted and analysed using a framework methodology. Data was charted using implementation stages as overarching themes and each stage was thematically analysed, to investigate the implementation process, the influences and their relationships. Secondary analyses were performed of the factors (barriers and facilitators) using an adapted version of the Consolidated Framework for Implementation Research (CFIR), and implementation strategies and interventions, using the Expert Recommendations for Implementing Change (ERIC) discrete implementation strategy compilation. Results: Six stages emerged, labelled as development or discovery, exploration, preparation, testing, operation and sustainability. Within the stages, a range of implementation activities/steps and five overarching influences (pharmacys' direction and impetus, internal communication, staffing, community fit and support) were identified. The stages and activities were not applied strictly in a linear fashion. There was a trend towards the greater the number of activities considered, the greater the apparent integration into the pharmacy organization. Implementation factors varied over the implementation stages, and additional factors were added to the CFIR list and definitions modified/contextualised for pharmacy. Implementation strategies employed by pharmacies varied widely. Evaluations were lacking. Conclusions: The process of implementation and five overarching influences of professional services implementation in community pharmacy have been outlined. Framework analysis revealed, outside of the five overarching influences, factors influencing implementation varied across the implementation stages. It is proposed at each stage, for each domain, the factors, strategies and evaluations should be considered. The Framework for the Implementation of Services in Pharmacy incorporates the contextualisation of implementation science for pharmacy.The study was funded as part of a University of Technology Sydney (UTS) Research Excellence Scholarship (RES), comprising of an Australian Postgraduate Award (APA) Scholarship funded by the Australian Government, plus a Top-up funded by the University of Technology Sydney, received from the primary author (JCM)

Evaluation of appendicitis risk prediction models in adults with suspected appendicitis

Background Appendicitis is the most common general surgical emergency worldwide, but its diagnosis remains challenging. The aim of this study was to determine whether existing risk prediction models can reliably identify patients presenting to hospital in the UK with acute right iliac fossa (RIF) pain who are at low risk of appendicitis. Methods A systematic search was completed to identify all existing appendicitis risk prediction models. Models were validated using UK data from an international prospective cohort study that captured consecutive patients aged 16–45 years presenting to hospital with acute RIF in March to June 2017. The main outcome was best achievable model specificity (proportion of patients who did not have appendicitis correctly classified as low risk) whilst maintaining a failure rate below 5 per cent (proportion of patients identified as low risk who actually had appendicitis). Results Some 5345 patients across 154 UK hospitals were identified, of which two‐thirds (3613 of 5345, 67·6 per cent) were women. Women were more than twice as likely to undergo surgery with removal of a histologically normal appendix (272 of 964, 28·2 per cent) than men (120 of 993, 12·1 per cent) (relative risk 2·33, 95 per cent c.i. 1·92 to 2·84; P < 0·001). Of 15 validated risk prediction models, the Adult Appendicitis Score performed best (cut‐off score 8 or less, specificity 63·1 per cent, failure rate 3·7 per cent). The Appendicitis Inflammatory Response Score performed best for men (cut‐off score 2 or less, specificity 24·7 per cent, failure rate 2·4 per cent). Conclusion Women in the UK had a disproportionate risk of admission without surgical intervention and had high rates of normal appendicectomy. Risk prediction models to support shared decision‐making by identifying adults in the UK at low risk of appendicitis were identified