Multi proxy approach to evaluate and delineate the potential of hot springs in the Kotli District (Kashmir, Pakistan)

Tattapani hot springs are located near the Kotli District of Azad Kashmir, Pakistan. This study evaluates these hot springs based on surface geological information, radon emission measurements, hydro-geochemical and isotopic signatures and potential source mechanisms. Field observations reveal that the hot springs are located at the crest of the Tattapani anticline along the faulted contact of Cambrian carbonates with Paleocene siliciclastics. In addition, remnants of igneous intrusions in the Cambrian carbonates are commonly observed. Spatial distribution of radon emissions (ranging between 2.1 and 29.5KBq m-3) indicates an anomalous zone located over the Cambrian-Paleocene faulted contact. Hydro-geochemical data show sodium-bicarbonate affinity of hot springs. The highest surface temperature of these springs is recorded at 60.8ºC. Average reservoir temperatures based on silica and cation geo-thermometers are 101ºC and 115ºC, respectively. Giggenbach ternary diagram (Na-K-Mg) suggests a non-equilibrium state between fluid and rock, whereas isotopic and chemical data indicate heat loss by conductive cooling and mixing with groundwater during the flow of thermal water up to the surface. Oxygen and deuterium isotopes indicate that thermal water is of meteoric origin, rain and/or snow in the north at higher altitudes providing the potential recharge. Furthermore, absence of tritium in the thermal water suggests a residence time of more than 50 years

DNA-Based Applications in Nanobiotechnology

Biological molecules such as deoxyribonucleic acid (DNA) have shown great potential in fabrication and construction of nanostructures and devices. The very properties that make DNA so effective as genetic material also make it a very suitable molecule for programmed self-assembly. The use of DNA to assemble metals or semiconducting particles has been extended to construct metallic nanowires and functionalized nanotubes. This paper highlights some important aspects of conjugating the unique physical properties of dots or wires with the remarkable recognition capabilities of DNA which could lead to miniaturizing biological electronics and optical devices, including biosensors and probes. Attempts to use DNA-based nanocarriers for gene delivery are discussed. In addition, the ecological advantages and risks of nanotechnology including DNA-based nanobiotechnology are evaluated

Uranium Concentration in Human Blood using Fission Track Etch Technique

The technique of fission track etch has been applied to determine concentration of uranium in human blood samples for exposed group and control group, male and female, using CR-39 track detector that is employed for registration of induced fission tracks. The blood samples of exposed group were collected from three key southern Iraqi governorates (Basrah, Muthanna and Dhi-Qar). These governorates were the center of intensive military activities during the 1991 and 2003 Gulf wars. The blood samples of the control group were taken from individuals who live in Babil governorate. This governorate, which is considered environmentally uncontaminated, is located north-west of the study area. The results showed that the uranium concentrations in human blood of exposed group ranged from 0.78 ppb (male, 3 years old, from Dhi-Qar) to 2.47 ppb (female, 65 years old, from Basrah). For the control group, the uranium concentration ranged from 0.32 ppb (male, 4 years old) to 1.47 ppb (female, 52 years old). It has also been found that the uranium concentrations in blood samples of exposed group are higher than those of the control group, and the uranium concentrations for female exposed group and control group are higher than those for male exposed group and control group. Keywords: uranium concentration, human blood, CR-39, fission track, Ira

Nanomaterials as Analytical Tools for Genosensors

Nanomaterials are being increasingly used for the development of electrochemical DNA biosensors, due to the unique electrocatalytic properties found in nanoscale materials. They offer excellent prospects for interfacing biological recognition events with electronic signal transduction and for designing a new generation of bioelectronic devices exhibiting novel functions. In particular, nanomaterials such as noble metal nanoparticles (Au, Pt), carbon nanotubes (CNTs), magnetic nanoparticles, quantum dots and metal oxide nanoparticles have been actively investigated for their applications in DNA biosensors, which have become a new interdisciplinary frontier between biological detection and material science. In this article, we address some of the main advances in this field over the past few years, discussing the issues and challenges with the aim of stimulating a broader interest in developing nanomaterial-based biosensors and improving their applications in disease diagnosis and food safety examination

Towards Low Latency and Resource-Efficient FPGA Implementations of the MUSIC Algorithm for Direction of Arrival Estimation

The estimation of the Direction of Arrival (DoA) is one of the most critical parameters for target recognition, identification and classification. MUltiple SIgnal Classification (MUSIC) is a powerful technique for DoA estimation. The algorithm requires complex mathematical operations like the computation of the covariance matrix for the input signals, eigenvalue decomposition and signal peak search. All these signal processing operations make real-time and resource-efficient implementation of the MUSIC algorithm on Field Programmable Gate Arrays (FPGAs) a challenge. In this paper, a novel design approach is proposed for the FPGA-implementation of the MUSIC algorithm. This approach enables a significant reduction in both FPGA resources and latency. In more detail, the proposed design enables the estimation of DoA in real-time scenarios in 2μ sec with 30% to 50% fewer resources as compared to existing techniques.The work of Pedro Reviriego was supported in part by the Architecting Intelligent Cost-effective Central Offices to enable 5G Tactile Internet (ACHILLES) through the Spanish Ministry of Economy and Competitivity under Project PID2019-104207RB-I00, in part by the Madrid Government (Comunidad de Madrid-Spain) through the Multiannual Agreement with Universidad Carlos III de Madrid (UC3M) in the line of Excellence of University Professors under Grant EPUC3M21, and in part by the Context of the V Plan Regional de Investigación Científica e Innovación Tecnológica (V PRICIT) (Regional Program of Research and Technological Innovation)

Synthesis, structural, spectral and biological evaluation of metals endowed 1,2,4-triazole

Biologically active triazole Schiff base ligand 2,4-dichloro-6-[(1H-1,2,4-triazol-3-ylimino)methyl]phenol (A) has been synthesized by the condensation reaction of an equimolar amount of 1H-1,2,4-triazole-3-amine and 3,5-dichlorosalicylaldehyde and then it coordinated with salts of metals [VO(IV), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II)] in 2:1 molar ratio to derive a series of transition metal chelates (1)-(6). All the compounds were characterized by various physical, spectral, analytical techniques and elemental analysis. Spectral characterization and magnetic moment data of complexes revealed square pyramidal geometry for vanadium complex and octahedral for remaining (2)-(6) complexes. Quantum chemical calculation has been carried out to explore optimized geometry and electronic structure of the ligand. Density functional theory (DFT) with B3LYP/6-311+g(d,p) method was performed to determine vibrational bands, frontier molecular orbitals (FMOs) and natural bond analysis (NBO) of the ligand. NBO analysis showed that the ligand bears higher molecular stability because of hyper conjugate interactions. Computational study results revealed that there was a close interaction of theoretical and experimental spectroscopic data. Global reactivity descriptors calculated by the energies of FMOs, indicated ligand to be bioactive. The synthesized compounds were studied for antibacterial, antifungal, antioxidant and antiglycation activity and the results revealed that ligand has remarkable activity which considerably increased upon chelation.                     KEY WORDS: Triazole ligand, Transition metal chelates, Antibacterial, Antifungal, Antioxidant, Computational study   Bull. Chem. Soc. Ethiop. 2020, 34(2), 335-351 DOI: https://dx.doi.org/10.4314/bcse.v34i2.1

Iron Deposition following Chronic Myocardial Infarction as a Substrate for Cardiac Electrical Anomalies: Initial Findings in a Canine Model

Purpose: Iron deposition has been shown to occur following myocardial infarction (MI). We investigated whether such focal iron deposition within chronic MI lead to electrical anomalies. Methods: Two groups of dogs (ex-vivo (n = 12) and in-vivo (n = 10)) were studied at 16 weeks post MI. Hearts of animals from ex-vivo group were explanted and sectioned into infarcted and non-infarcted segments. Impedance spectroscopy was used to derive electrical permittivity () and conductivity (). Mass spectrometry was used to classify and characterize tissue sections with (IRON+) and without (IRON-) iron. Animals from in-vivo group underwent cardiac magnetic resonance imaging (CMR) for estimation of scar volume (late-gadolinium enhancement, LGE) and iron deposition (T2*) relative to left-ventricular volume. 24-hour electrocardiogram recordings were obtained and used to examine Heart Rate (HR), QT interval (QT), QT corrected for HR (QTc) and QTc dispersion (QTcd). In a fraction of these animals (n = 5), ultra-high resolution electroanatomical mapping (EAM) was performed, co-registered with LGE and T2* CMR and were used to characterize the spatial locations of isolated late potentials (ILPs). Results: Compared to IRON- sections, IRON+ sections had higher, but no difference in. A linear relationship was found between iron content and (p1.5%)) with similar scar volumes (7.28%±1.02% (Iron (1.5%)), p = 0.51) but markedly different iron volumes (1.12%±0.64% (Iron (1.5%)), p = 0.02), QT and QTc were elevated and QTcd was decreased in the group with the higher iron volume during the day, night and 24-hour period (p<0.05). EAMs co-registered with CMR images showed a greater tendency for ILPs to emerge from scar regions with iron versus without iron. Conclusion: The electrical behavior of infarcted hearts with iron appears to be different from those without iron. Iron within infarcted zones may evolve as an arrhythmogenic substrate in the post MI period

Development of Flood Vulnerability and Risk Indices for Kelantan District, Peninsular Malaysia

Natural hazards are inevitable which required proper monitoring and application of mitigation measures to reduce vulnerability and risk. Flood is one of the most common atural hazards in Malaysia. The present study was conducted to identify vulnerable flood zones using flood vulnerability and risk indices and to minimize flood damage by suggesting mitigation measures. Four sub-districts of the Kelantan state, Peninsular Malaysia were selected based on the availability of the data and flooding history. For this urpose, demographic, social, economic, and flood event data were collected to develop flood vulnerability and risk index. Descriptive and inferential statistics were used to analyze the results. The results revealed that developed flood vulnerability and risk indices accurately predict high-priority zones. Overall, it was found that flood risk is relatively higher in a rural area compared to an urban area

Critically ill patients with diabetes and Middle East respiratory syndrome:a multi-center observational study

Background: Diabetes is a risk factor for infection with coronaviruses. This study describes the demographic, clinical data, and outcomes of critically ill patients with diabetes and Middle East Respiratory Syndrome (MERS).Methods: This retrospective cohort study was conducted at 14 hospitals in Saudi Arabia (September 2012–January 2018). We compared the demographic characteristics, underlying medical conditions, presenting symptoms andsigns, management and clinical course, and outcomes of critically ill patients with MERS who had diabetes compared to those with no diabetes. Multivariable logistic regression analysis was performed to determine ifdiabetes was an independent predictor of 90-day mortality.Results: Of the 350 critically ill patients with MERS, 171 (48.9%) had diabetes. Patients with diabetes were more likely to be older, and have comorbid conditions, compared to patients with no diabetes. They were more likely topresent with respiratory failure requiring intubation, vasopressors, and corticosteroids. The median time to clearance of MERS-CoV RNA was similar (23 days (Q1, Q3: 17, 36) in patients with diabetes and 21.0 days (Q1, Q3: 10, 33) in patients with no diabetes). Mortality at 90 days was higher in patients with diabetes (78.9% versus 54.7%, p &lt;0.0001). Multivariable regression analysis showed that diabetes was an independent risk factor for 90-day mortality(odds ratio, 2.09; 95% confidence interval, 1.18–3.72).Conclusions: Half of the critically ill patients with MERS have diabetes; which is associated with more severe disease. Diabetes is an independent predictor of mortality among critically patients with MERS