475 research outputs found

    Dynamic subfilter-scale stress model for large-eddy simulations

    Get PDF
    We present a modification of the integral length-scale approximation (ILSA) model originally proposed by Piomelli et al. [Piomelli et al., J. Fluid Mech. 766, 499 (2015)] and apply it to plane channel flow and a backward-facing step. In the ILSA models the length scale is expressed in terms of the integral length scale of turbulence and is determined by the flow characteristics, decoupled from the simulation grid. In the original formulation the model coefficient was constant, determined by requiring a desired global contribution of the unresolved subfilter scales (SFSs) to the dissipation rate, known as SFS activity; its value was found by a set of coarse-grid calculations. Here we develop two modifications. We de-fine a measure of SFS activity (based on turbulent stresses), which adds to the robustness of the model, particularly at high Reynolds numbers, and removes the need for the prior coarse-grid calculations: The model coefficient can be computed dynamically and adapt to large-scale unsteadiness. Furthermore, the desired level of SFS activity is now enforced locally (and not integrated over the entire volume, as in the original model), providing better control over model activity and also improving the near-wall behavior of the model. Application of the local ILSA to channel flow and a backward-facing step and comparison with the original ILSA and with the dynamic model of Germano et al. [Germano et al., Phys. Fluids A 3, 1760 (1991)] show better control over the model contribution in the local ILSA, while the positive properties of the original formulation (including its higher accuracy compared to the dynamic model on coarse grids) are maintained. The backward-facing step also highlights the advantage of the decoupling of the model length scale from the mesh

    Solubility isotope effects in aqueous solutions of methane

    Get PDF
    The isotope effect on the Henry's law coefficients of methane in aqueous solution (H/D and C-12/C-13 substitution) are interpreted using the statistical mechanical theory of condensed phase isotope effects. The missing spectroscopic data needed for the implementation of the theory were obtained either experimentally (infrared measurements), by computer simulation (molecular dynamics technique), or estimated using the Wilson's GF matrix method. The order of magnitude and sign of both solute isotope effects can be predicted by the theory. Even a crude estimation based on data from previous vapor pressure isotope effect studies of pure methane at low temperature can explain the inverse effect found for the solubility of deuterated methane in water. (C) 2002 American Institute of Physics

    An examination of the cryptocurrency pump-and-dump ecosystem

    Get PDF
    The recent introduction of thousands of cryptocurrencies in an unregulated environment has created many opportunities for unscrupulous traders to profit from price manipulation. We quantify the scope of one widespread tactic, the “pump and dump”, in which actors coordinate to bid up the price of coins before selling at a profit. We joined all relevant channels on two popular group-messaging platforms, Telegram and Discord, and identified thousands of different pumps targeting hundreds of coins. We find that pumps are modestly successful in driving short-term price rises, but that this effect has diminished over time. We also find that the most successful pumps are those that are most transparent about their intentions. Combined with evidence of concentration among a small number of channels, we conclude that regulators have an opportunity to effectively crack down on this illicit activity that threatens broader adoption of blockchain technologies

    Analyzing Target-Based Cryptocurrency Pump and Dump Schemes

    Get PDF
    As the number of cryptocurrencies has exploded in recent years, so too has the fraud. One popular strategy is when actors promote coordinated purchases of coins in hopes of temporarily driving up prices. Prior work investigating such pump and dump schemes has focused on the immediate impact to prices following pump signals, which were largely interpreted as following the same strategy. The reality, as with most cybercrimes, is that the operators of the schemes try out a much more heterogeneous mix of tactics. From a population of 12,252 pump signals observed between July 2017 and January 2019, we identify and examine 3,683 so-called target-based pump signals that announce promoted coins alongside buy and sell targets, but without a coordinated purchase time. We develop a strategy to measure the success of target pumps over longer time horizons. We find that around half of these pumps reach at least one of their sell targets, and that reaching their peak price often takes days, as opposed to the seconds or minutes required in pumps studied previously. We also examine the various groups promoting coins and present evidence that groups try a variety of distinct strategies and experience varying success. We find that the most successful groups promote many coins and issue many pumps, but not for the same coins. As decentralized finance becomes more popular, a deeper understanding of price manipulation techniques like target pumps is needed to combat fraud

    Responding to physical and psychological health impacts of disasters: Case study of the Iranian disaster rehabilitation plan Agir en réponse aux conséquences physiques et psychologiques des catastrophes naturelles: �tude de cas du plan de relèvement post-catastrophe en Iran

    Get PDF
    This paper describes the process of developing a national pre-disaster plan for physical health and psychological rehabilitation of disaster-stricken communities. Data gathered from a literature review and expert panel discussions informed the process of drawing up unified definitions of physical and psychological health rehabilitation, carrying out stakeholder and STEEP-V analyses, and assigning the responsible organization and the collaborative organizations for each task. The Ministry of Health and the Welfare Organization were selected as the two responsible organizations. Integrated management at all levels, and sharing information, education and funding, were identified as ways to improve stakeholders� participation and collaboration. A system is needed for evaluating the implementation of the disaster rehabilitation plan, using valid and reliable indicators. © 2016, World Health Organization. All rights reserved

    Fabrication of unconventional inertial microfluidic channels using wax 3D printing.

    Full text link
    Inertial microfluidics has emerged over the past decade as a powerful tool to accurately control cells and microparticles for diverse biological and medical applications. Many approaches have been proposed to date in order to increase the efficiency and accuracy of inertial microfluidic systems. However, the effects of channel cross-section and solution properties (Newtonian or non-Newtonian) have not been fully explored, primarily due to limitations in current microfabrication methods. In this study, we overcome many of these limitations using wax 3D printing technology and soft lithography through a novel workflow, which eliminates the need for the use of silicon lithography and polydimethylsiloxane (PDMS) bonding. We have shown that by adding dummy structures to reinforce the main channels, optimizing the gap between the dummy and main structures, and dissolving the support wax on a PDMS slab to minimize the additional handling steps, one can make various non-conventional microchannels. These substantially improve upon previous wax printed microfluidic devices where the working area falls into the realm of macrofluidics rather than microfluidics. Results revealed a surface roughness of 1.75 μm for the printed channels, which does not affect the performance of inertial microfluidic devices used in this study. Channels with complex cross-sections were fabricated and then analyzed to investigate the effects of viscoelasticity and superposition on the lateral migration of the particles. Finally, as a proof of concept, microcarriers were separated from human mesenchymal stem cells using an optimized channel with maximum cell-holding capacity, demonstrating the suitability of these microchannels in the bioprocessing industry

    Numerical and Experimental Study of Cross-Sectional Effects on the Mixing Performance of the Spiral Microfluidics.

    Full text link
    Mixing at the microscale is of great importance for various applications ranging from biological and chemical synthesis to drug delivery. Among the numerous types of micromixers that have been developed, planar passive spiral micromixers have gained considerable interest due to their ease of fabrication and integration into complex miniaturized systems. However, less attention has been paid to non-planar spiral micromixers with various cross-sections and the effects of these cross-sections on the total performance of the micromixer. Here, mixing performance in a spiral micromixer with different channel cross-sections is evaluated experimentally and numerically in the Re range of 0.001 to 50. The accuracy of the 3D-finite element model was first verified at different flow rates by tracking the mixing index across the loops, which were directly proportional to the spiral radius and were hence also proportional to the Dean flow. It is shown that higher flow rates induce stronger vortices compared to lower flow rates; thus, fewer loops are required for efficient mixing. The numerical study revealed that a large-angle outward trapezoidal cross-section provides the highest mixing performance, reaching efficiencies of up to 95%. Moreover, the velocity/vorticity along the channel length was analyzed and discussed to evaluate channel mixing performance. A relatively low pressure drop (<130 kPa) makes these passive spiral micromixers ideal candidates for various lab-on-chip applications

    Annealing Heat Treatment of ZnO Nanoparticles Grown on Porous Si Substrate Using Spin-Coating Method

    Get PDF
    ZnO nanoparticles were successfully deposited on porous silicon (PSi) substrate using spin-coating method. In order to prepare PSi, electrochemical etching was employed to modify the Si surface. Zinc acetate dihydrate was used as a starting material in ZnO sol-gel solution preparation. The postannealing treatments were investigated on morphologies and photoluminescence (PL) properties of the ZnO thin films. Field emission scanning electron microscopy (FESEM) results indicate that the thin films composed by ZnO nanoparticles were distributed uniformly on PSi. The average sizes of ZnO nanoparticle increase with increasing annealing temperature. Atomic force microscopic (AFM) analysis reveals that ZnO thin films annealed at 500°C had the smoothest surface. PL spectra show two peaks that completely correspond to nanostructured ZnO and PSi. These findings indicate that the ZnO nanostructures grown on PSi are promising for application as light emitting devices
    corecore