System for generating timing and control signals

A system capable of generating every possible data frame subperiod and delayed subperiod of a data frame of length of M clock pulse intervals (CPIs) comprised of parallel modulo-m sub i counters is presented. Each m sub i is a prime power divisor of M and a cascade of alpha sub i identical modulo-p sub i counters. The modulo-p sub i counters are feedback shift registers which cycle through p sub i distinct states. Every possible nontrivial data frame subperiod and delayed subperiod is derived and a specific CPI in the data frame is detected. The number of clock pulses required to bring every modulo-p sub i counter to a respective designated state or count is determined by the Chinese remainder theorem. This corresponds to the solution of simultaneous congruences over relatively prime moduli

Inventory of Greenhouse-Gas Mitigation Measures. Examples from the IIASA Technology Data Base

The comparative assessment of different strategies for reducing energy-related emissions of greenhouse gases is a major research area within the Environmentally Compatible Energy Strategies (ECS) Project at IIASA. An integral part of this work is the development of a mitigation technology inventory that encompasses a data base called CO2DB. The data base covers the full range of mitigation measures spanning efficiency improvements, conservation, enhanced use of low-carbon fuels, carbon-free sources of energy and other options such as afforestation and enhancement of carbon sinks. The data base includes detailed descriptions of the technical, economic and environmental performance of technologies as well as data pertinent to their commercialization, introduction and diffusion. Additional information includes literature sources, description of salient assumptions and how assessments were made. The primary purpose for the development of the CO2DB is to facilitate the analysis of technological options for reducing the global emissions of greenhouse gases, and in particular for assessing their potentials and costs. This working paper gives a description of selected technologies from the CO2DB. It also describes some of the most important assumptions behind the technology assessments and gives relevant literature sources. The examples chosen cover the energy system from primary energy production and conversion to energy end-use that results in actual energy services. The paper concludes by giving an example of an energy chain, also called full fuel-cycle analysis, with the associated costs and emissions. This example illustrates possible uses of the CO2DB as a tool for the assessment of mitigation potentials and costs. The data base can facilitate the assessment of carbon dioxide reduction, removal and storage technologies by combining many interrelated technologies together into the energy systems, i.e. to analyze measures throughout the energy chain from primary energy extraction to measures to improve energy. This paper can be used as a technical guide to the technology inventory in conjunction with the manual for the CO2DB software support system (WP-91-31a)

Managing at the Speed of Light: Improving Mission-Support Performance

The House and Senate Energy and Water Development Appropriations Subcommittees requested this study to help DOE's three major mission-support organizations improve their operations to better meet the current and future needs of the department. The passage of the Recovery Act only increased the importance of having DOE's mission-support offices working in the most effective, efficient, and timely manner as possible. While following rules and regulations is essential, the foremost task of the mission-support offices is to support the department's mission, i.e., the programs that DOE is implementing, whether in Washington D.C. or in the field. As a result, the Panel offered specific recommendations to strengthen the mission-focus and improve the management of each of the following support functions based on five "management mandates":- Strategic Vision- Leadership- Mission and Customer Service Orientation- Tactical Implementation- Agility/AdaptabilityKey FindingsThe Panel made several recommendations in each of the functional areas examined and some overarching recommendations for the corporate management of the mission-support offices that they believed would result in significant improvements to DOE's mission-support operations. The Panel believed that adopting these recommendations will not only make DOE a better functioning organization, but that most of them are essential if DOE is to put its very large allocation of Recovery Act funding to its intended uses as quickly as possible

Nonlinear elasticity of stiff biopolymers connected by flexible linkers

Networks of the biopolymer actin, cross-linked by the compliant protein filamin, form soft gels. They can, however, withstand large shear stresses due to their pronounced nonlinear elastic behavior. The nonlinear elasticity can be controlled by varying the number of cross-links per actin filament. We propose and test a model of rigid filaments decorated by multiple flexible linkers that is in quantitative agreement with experiment. This allows us to estimate loads on individual cross-links, which we find to be less than 10 pN. © 2009 The American Physical Society

Field responsive mechanical metamaterials.

Typically, mechanical metamaterial properties are programmed and set when the architecture is designed and constructed, and do not change in response to shifting environmental conditions or application requirements. We present a new class of architected materials called field responsive mechanical metamaterials (FRMMs) that exhibit dynamic control and on-the-fly tunability enabled by careful design and selection of both material composition and architecture. To demonstrate the FRMM concept, we print complex structures composed of polymeric tubes infilled with magnetorheological fluid suspensions. Modulating remotely applied magnetic fields results in rapid, reversible, and sizable changes of the effective stiffness of our metamaterial motifs

A scintillating plastic fiber tracking detector for neutron and proton imaging and spectroscopy

We report the results of recent calibration data analysis of a prototype scintillating fiber tracking detector system designed to perform imaging, spectroscopy and particle identification on 20 to 250 MeV neutrons and protons. We present the neutron imaging concept and briefly review the detection principle and the prototype description. The prototype detector system records ionization track data on an event-by-event basis allowing event selection criteria to be used in the off-line analysis. Images of acrylic phantoms from the analysis of recent proton beam calibrations (14 to 65 MeV range) are presented as demonstrations of the particle identification, imaging and energy measurement capabilities. The measured position resolution is c 500 pm. The measured energy resolution (AE/E, FWHM) is 14.2% at 35 MeV. An effective technique for track identification and data compression is presented. The detection techniques employed can be applied to measurements in a variety of disciplines including solar and atmospheric physics, radiation therapy and nuclear materials monitoring. These applications are discussed briefly as are alternative detector configurations and future development plans

LUX -- A Laser-Plasma Driven Undulator Beamline

The LUX beamline is a novel type of laser-plasma accelerator. Building on the joint expertise of the University of Hamburg and DESY the beamline was carefully designed to combine state-of-the-art expertise in laser-plasma acceleration with the latest advances in accelerator technology and beam diagnostics. LUX introduces a paradigm change moving from single-shot demonstration experiments towards available, stable and controllable accelerator operation. Here, we discuss the general design concepts of LUX and present first critical milestones that have recently been achieved, including the generation of electron beams at the repetition rate of up to 5 Hz with energies above 600 MeV and the generation of spontaneous undulator radiation at a wavelength well below 9 nm.Comment: submitte

Learning masculinities in a Japanese high school rugby club

This paper draws on research conducted on a Tokyo high school rugby club to explore diversity in the masculinities formed through membership in the club. Based on the premise that particular forms of masculinity are expressed and learnt through ways of playing (game style) and the attendant regimes of training, it examines the expression and learning of masculinities at three analytic levels. It identifies a hegemonic, culture-specific form of masculinity operating in Japanese high school rugby, a class-influenced variation of it at the institutional level of the school and, by further tightening its analytic focus, further variation at an individual level. In doing so this paper highlights the ways in which diversity in the masculinities constructed through contact sports can be obfuscated by a reductionist view of there being only one, universal hegemonic patterns of masculinity

Space power distribution system technology. Volume 2: Autonomous power management

Electrical power subsystem requirements, power management system functional requirements, algorithms, power management subsystem, hardware development, and trade studies and analyses are discussed

Are Albumin Levels a Good Predictor of Mortality in Elderly Patients with Neck of Femur Fractures?

Background Neck of femur (NOF) fractures are associated with significant morbidity and mortality in elderly people with multiple co-morbidities; making management of this patient subgroup challenging. Predictors of an increase in morbidity and mortality would therefore provide a useful framework for the assessment and management of this demographic. Within the current literature, hypoalbuminaemia (<35g/dl) has been highlighted as being a good biochemical predictor of short-term mortality (<12 months). Our aims were to assess whether there was an association between low albumin levels and short-term mortality and whether the severity adversely affects outcomes. Materials and Methods Patients admitted to our large district hospital between January 2011 and December 2012 who had sustained a NOF fracture, were over 65 years old and had a pre-operative albumin level were included. The study concluded in July 2014. Demographic and pre-operative function and albumin data was collated retrospectively. Correlation with mortality was made. Results 471 patients had usable data. Mean pre-operative albumin level was 29.5g/dl (SD 6.22g/dl) in patients who died and 32.8g/dl (SD 6.43g/dl) in patients who survived during the study period. Pre-operative albumin level was significantly associated with survival (hazard ratio0.957: 95% CI (0.937, 0.978); p<0.001) A reduction of 1g/dl in pre-operative albumin is associated with an increased hazard of death of 4.3%. Conclusions Early identification of patients with hypoalbuminaemia on admission with a venous blood sample and timely input from orthogeriatrians could optimise these patients pre- and post-operatively. This may enable rates of morbidity and mortality to fall. Hypoalbuminaemia may be a reasonable predictor of shorter-term mortality in this patient subgroup. However, this may reflect existing co-morbidities rather than an isolated cause. This study supports a correlation between hypoalbuminaemia and poorer outcome for patients with NOF fractures