Parallel Real-Time Scheduling for Latency-Critical Applications

In order to provide safety guarantees or quality of service guarantees, many of today\u27s systems consist of latency-critical applications, e.g. applications with timing constraints. The problem of scheduling multiple latency-critical jobs on a multiprocessor or multicore machine has been extensively studied for sequential (non-parallizable) jobs and different system models and different objectives have been considered. However, the computational requirement of a single job is still limited by the capacity of a single core. To provide increasingly complex functionalities of applications and to complete their higher computational demands within the same or even more stringent timing constraints, we must exploit the internal parallelism of jobs, where individual jobs are parallel programs and can potentially utilize more than one core in parallel. However, there is little work considering scheduling multiple parallel jobs that are latency-critical. This dissertation focuses on developing new scheduling strategies, analysis tools, and practical platform design techniques to enable efficient and scalable parallel real-time scheduling for latency-critical applications on multicore systems. In particular, the research is focused on two types of systems: (1) static real-time systems for tasks with deadlines where the temporal properties of the tasks that need to execute is known a priori and the goal is to guarantee the temporal correctness of the tasks prior to their executions; and (2) online systems for latency-critical jobs where multiple jobs arrive over time and the goal to optimize for a performance objective of jobs during the execution. For static real-time systems for parallel tasks, several scheduling strategies, including global earliest deadline first, global rate monotonic and a novel federated scheduling, are proposed, analyzed and implemented. These scheduling strategies have the best known theoretical performance for parallel real-time tasks under any global strategy, any fixed priority scheduling and any scheduling strategy, respectively. In addition, federated scheduling is generalized to systems with multiple criticality levels and systems with stochastic tasks. Both numerical and empirical experiments show that federated scheduling and its variations have good schedulability performance and are efficient in practice. For online systems with multiple latency-critical jobs, different online scheduling strategies are proposed and analyzed for different objectives, including maximizing the number of jobs meeting a target latency, maximizing the profit of jobs, minimizing the maximum latency and minimizing the average latency. For example, a simple First-In-First-Out scheduler is proven to be scalable for minimizing the maximum latency. Based on this theoretical intuition, a more practical work-stealing scheduler is developed, analyzed and implemented. Empirical evaluations indicate that, on both real world and synthetic workloads, this work-stealing implementation performs almost as well as an optimal scheduler

Concurrency Platforms for Real-Time and Cyber-Physical Systems

Parallel processing is an important way to satisfy the increasingly demanding computational needs of modern real-time and cyber-physical systems, but existing parallel computing technologies primarily emphasize high-throughput and average-case performance metrics, which are largely unsuitable for direct application to real-time, safety-critical contexts. This work contrasts two concurrency platforms designed to achieve predictable worst case parallel performance for soft real-time workloads with millisecond periods and higher. One of these is then the basis for the CyberMech platform, which enables parallel real-time computing for a novel yet representative application called Real-Time Hybrid Simulation (RTHS). RTHS combines demanding parallel real-time computation with real-time simulation and control in an earthquake engineering laboratory environment, and results concerning RTHS characterize a reasonably comprehensive survey of parallel real-time computing in the static context, where the size, shape, timing constraints, and computational requirements of workloads are fixed prior to system runtime. Collectively, these contributions constitute the first published implementations and evaluations of general-purpose concurrency platforms for real-time and cyber-physical systems, explore two fundamentally different design spaces for such systems, and successfully demonstrate the utility and tradeoffs of parallel computing for statically determined real-time and cyber-physical systems

Asynchronous Teams and Tasks in a Message Passing Environment

As the discipline of scientific computing grows, so too does the "skills gap" between the increasingly complex scientific applications and the efficient algorithms required. Increasing demand for computational power on the march towards exascale requires innovative approaches. Closing the skills gap avoids the many pitfalls that lead to poor utilisation of resources and wasted investment. This thesis tackles two challenges: asynchronous algorithms for parallel computing and fault tolerance. First I present a novel asynchronous task invocation methodology for Discontinuous Galerkin codes called enclave tasking. The approach modifies the parallel ordering of tasks that allows for efficient scaling on dynamic meshes up to 756 cores. It ensures high levels of concurrency and intermixes tasks of different computational properties. Critical tasks along domain boundaries are prioritised for an overlap of computation and communication. The second contribution is the teaMPI library, forming teams of MPI processes exchanging consistency data through an asynchronous "heartbeat". In contrast to previous approaches, teaMPI operates fully asynchronously with reduced overhead. It is also capable of detecting individually slow or failing ranks and inconsistent data among replicas. Finally I provide an outlook into how asynchronous teams using enclave tasking can be combined into an advanced team-based diffusive load balancing scheme. Both concepts are integrated into and contribute towards the ExaHyPE project, a next generation code that solves hyperbolic equation systems on dynamically adaptive cartesian grids

Many-Task Computing and Blue Waters

This report discusses many-task computing (MTC) generically and in the context of the proposed Blue Waters systems, which is planned to be the largest NSF-funded supercomputer when it begins production use in 2012. The aim of this report is to inform the BW project about MTC, including understanding aspects of MTC applications that can be used to characterize the domain and understanding the implications of these aspects to middleware and policies. Many MTC applications do not neatly fit the stereotypes of high-performance computing (HPC) or high-throughput computing (HTC) applications. Like HTC applications, by definition MTC applications are structured as graphs of discrete tasks, with explicit input and output dependencies forming the graph edges. However, MTC applications have significant features that distinguish them from typical HTC applications. In particular, different engineering constraints for hardware and software must be met in order to support these applications. HTC applications have traditionally run on platforms such as grids and clusters, through either workflow systems or parallel programming systems. MTC applications, in contrast, will often demand a short time to solution, may be communication intensive or data intensive, and may comprise very short tasks. Therefore, hardware and software for MTC must be engineered to support the additional communication and I/O and must minimize task dispatch overheads. The hardware of large-scale HPC systems, with its high degree of parallelism and support for intensive communication, is well suited for MTC applications. However, HPC systems often lack a dynamic resource-provisioning feature, are not ideal for task communication via the file system, and have an I/O system that is not optimized for MTC-style applications. Hence, additional software support is likely to be required to gain full benefit from the HPC hardware

The parallel event loop model and runtime: a parallel programming model and runtime system for safe event-based parallel programming

Recent trends in programming models for server-side development have shown an increasing popularity of event-based single- threaded programming models based on the combination of dynamic languages such as JavaScript and event-based runtime systems for asynchronous I/O management such as Node.JS. Reasons for the success of such models are the simplicity of the single-threaded event-based programming model as well as the growing popularity of the Cloud as a deployment platform for Web applications. Unfortunately, the popularity of single-threaded models comes at the price of performance and scalability, as single-threaded event-based models present limitations when parallel processing is needed, and traditional approaches to concurrency such as threads and locks don't play well with event-based systems. This dissertation proposes a programming model and a runtime system to overcome such limitations by enabling single-threaded event-based applications with support for speculative parallel execution. The model, called Parallel Event Loop, has the goal of bringing parallel execution to the domain of single-threaded event-based programming without relaxing the main characteristics of the single-threaded model, and therefore providing developers with the impression of a safe, single-threaded, runtime. Rather than supporting only pure single-threaded programming, however, the parallel event loop can also be used to derive safe, high-level, parallel programming models characterized by a strong compatibility with single-threaded runtimes. We describe three distinct implementations of speculative runtimes enabling the parallel execution of event-based applications. The first implementation we describe is a pessimistic runtime system based on locks to implement speculative parallelization. The second and the third implementations are based on two distinct optimistic runtimes using software transactional memory. Each of the implementations supports the parallelization of applications written using an asynchronous single-threaded programming style, and each of them enables applications to benefit from parallel execution

Analyse des synchronisations dans un programme parallèle ordonnancé par vol de travail. Applications à la génération déterministe de nombres pseudo-aléatoires.

We present two contributions to the field of parallel programming.The first contribution is theoretical: we introduce SIPS analysis, a novel approach to estimate the number of synchronizations performed during the execution of a parallel algorithm.Based on the concept of logical clocks, it allows us: on one hand, to deliver new bounds for the number of synchronizations, in expectation; on the other hand, to design more efficient parallel programs by dynamic adaptation of the granularity.The second contribution is pragmatic: we present an efficient parallelization strategy for pseudorandom number generation, independent of the number of concurrent processes participating in a computation.As an alternative to the use of one sequential generator per process, we introduce a generic API called Par-R, which is designed and analyzed using SIPS.Its main characteristic is the use of a sequential generator that can perform a ``jump-ahead'' directly from one number to another on an arbitrary distance within the pseudorandom sequence.Thanks to SIPS, we show that, in expectation, within an execution scheduled by work stealing of a "very parallel" program (whose depth or critical path is subtle when compared to the work or number of operations), these operations are rare.Par-R is compared with the parallel pseudorandom number generator DotMix, written for the Cilk Plus dynamic multithreading platform.The theoretical overhead of Par-R compares favorably to DotMix's overhead, what is confirmed experimentally, while not requiring a fixed generator underneath.Nous présentons deux contributions dans le domaine de la programmation parallèle.La première est théorique : nous introduisons l'analyse SIPS, une approche nouvelle pour dénombrer le nombre d'opérations de synchronisation durant l'exécution d'un algorithme parallèle ordonnancé par vol de travail.Basée sur le concept d'horloges logiques, elle nous permet,: d'une part de donner de nouvelles majorations de coût en moyenne; d'autre part de concevoir des programmes parallèles plus efficaces par adaptation dynamique de la granularité.La seconde contribution est pragmatique: nous présentons une parallélisation générique d'algorithmes pour la génération déterministe de nombres pseudo-aléatoires, indépendamment du nombre de processus concurrents lors de l'exécution.Alternative à l'utilisation d'un générateur pseudo-aléatoire séquentiel par processus, nous introduisons une API générique, appelée Par-R qui est conçue et analysée grâce à SIPS.Sa caractéristique principale est d'exploiter un générateur séquentiel qui peut "sauter" directement d'un nombre à un autre situé à une distance arbitraire dans la séquence pseudo-aléatoire.Grâce à l'analyse SIPS, nous montrons qu'en moyenne, lors d'une exécution par vol de travail d'un programme très parallèle (dont la profondeur ou chemin critique est très petite devant le travail ou nombre d'opérations), ces opérations de saut sont rares.Par-R est comparé au générateur pseudo-aléatoire DotMix, écrit pour Cilk Plus, une extension de C/C++ pour la programmation parallèle par vol de travail.Le surcout théorique de Par-R se compare favorablement au surcoput de DotMix, ce qui apparait aussi expériemntalement.De plus, étant générique, Par-R est indépendant du générateur séquentiel sous-jacent