A new sinkhole attack detection algorithm for RPL in wireless sensor networks (WSN)

With the continuous improvement of science and technology, wireless sensor network technology has gradually been widely used, and provides great convenience for people's living, but with the continuous improvement of the degree of application, wireless sensor network security issues also enter people's field of vision. Sensor nodes can be used for continuous sensing, event recognition and event identification. 6LoWPAN plays an important role in this convergence of heterogeneous technologies, which allows sensors to transmit information using IPv6 stack. Sensors perform critical tasks and become targets of attacks. Sinkhole attack is one of the most common attacks to sensor networks, threatening the network availability by dropping data or disturbing routing paths. RPL is a standard routing protocol commonly used in sensor networks. Therefore, this research presents the works in designing and developing Secured-RPL using the eave-listening concept (overhearing) to treating sinkhole attack. The suggested mechanism method could determine transmitted packages then overhear to the received packet, meaning that the node can overhearing to the neighbor node. Furthermore, three different simulation scenarios were applied, which are the scenario without attacker nodes, scenario with attacker nodes and the scenario with attacker and security by using Cooja simulator to Measurement and analysis performance of RPL in terms of packet delivery ratio (PDR) and power consumption over different packet transmission rate. The experimental results show that the proposed recognition method can identify sinkholes attack effectively and with less storage cost under various wireless sensor networks. Where the optimization ratio of the PDR in scenario with attacker node with the security was close to the scenario with a normal node

A Scheme for Detecting the Sinkhole for Secured WSN

Because of the limited computation capability as well as transmissions being broadcasted in a wireless sensor network (WSN) they are supposed to be more susceptible for attacks related to the security. As present wireless sensor networks have low-power constraints as well as increased complexity, thus for nodes’ performance analysis related to the embedded software and network simulation efficient approaches are required. Additionally, as these networks are used to deal with the sensitive information and operated in the adverse unattended environments, thus, security feature must be added in most of these wireless sensor networks. In this paper a novel scheme for detecting various sinkhole nodes for wireless sensor network (WSN). The results of this proposed scheme show the 1.75% fake positive rate and 96% of detection rate. In comparison to the previous schemes, these aspects are considerably better. In addition to these aspects, our scheme also achieves the communication as well as computational efficiencies. As a result of which, this proposed scheme proved to have better results in many applications.

Simulation of attacks for security in wireless sensor network

The increasing complexity and low-power constraints of current Wireless Sensor Networks (WSN) require efficient methodologies for network simulation and embedded software performance analysis of nodes. In addition, security is also a very important feature that has to be addressed in most WSNs, since they may work with sensitive data and operate in hostile unattended environments. In this paper, a methodology for security analysis of Wireless Sensor Networks is presented. The methodology allows designing attack-aware embedded software/firmware or attack countermeasures to provide security in WSNs. The proposed methodology includes attacker modeling and attack simulation with performance analysis (node?s software execution time and power consumption estimation). After an analysis of different WSN attack types, an attacker model is proposed. This model defines three different types of attackers that can emulate most WSN attacks. In addition, this paper presents a virtual platform that is able to model the node hardware, embedded software and basic wireless channel features. This virtual simulation analyzes the embedded software behavior and node power consumption while it takes into account the network deployment and topology. Additionally, this simulator integrates the previously mentioned attacker model. Thus, the impact of attacks on power consumption and software behavior/execution-time can be analyzed. This provides developers with essential information about the effects that one or multiple attacks could have on the network, helping them to develop more secure WSN systems. This WSN attack simulator is an essential element of the attack-aware embedded software development methodology that is also introduced in this work.This work has been funded by the Spanish MICINN under the TEC2011-28666-C04-02 and TEC2014-58036-C4-3-R project

An Energy Aware and Secure MAC Protocol for Tackling Denial of Sleep Attacks in Wireless Sensor Networks

Wireless sensor networks which form part of the core for the Internet of Things consist of resource constrained sensors that are usually powered by batteries. Therefore, careful energy awareness is essential when working with these devices. Indeed,the introduction of security techniques such as authentication and encryption, to ensure confidentiality and integrity of data, can place higher energy load on the sensors. However, the absence of security protection c ould give room for energy drain attacks such as denial of sleep attacks which have a higher negative impact on the life span ( of the sensors than the presence of security features. This thesis, therefore, focuses on tackling denial of sleep attacks from two perspectives A security perspective and an energy efficiency perspective. The security perspective involves evaluating and ranking a number of security based techniques to curbing denial of sleep attacks. The energy efficiency perspective, on the other hand, involves exploring duty cycling and simulating three Media Access Control ( protocols Sensor MAC, Timeout MAC andTunableMAC under different network sizes and measuring different parameters such as the Received Signal Strength RSSI) and Link Quality Indicator ( Transmit power, throughput and energy efficiency Duty cycling happens to be one of the major techniques for conserving energy in wireless sensor networks and this research aims to answer questions with regards to the effect of duty cycles on the energy efficiency as well as the throughput of three duty cycle protocols Sensor MAC ( Timeout MAC ( and TunableMAC in addition to creating a novel MAC protocol that is also more resilient to denial of sleep a ttacks than existing protocols. The main contributions to knowledge from this thesis are the developed framework used for evaluation of existing denial of sleep attack solutions and the algorithms which fuel the other contribution to knowledge a newly developed protocol tested on the Castalia Simulator on the OMNET++ platform. The new protocol has been compared with existing protocols and has been found to have significant improvement in energy efficiency and also better resilience to denial of sleep at tacks Part of this research has been published Two conference publications in IEEE Explore and one workshop paper

Solutions and Tools for Secure Communication in Wireless Sensor Networks

Secure communication is considered a vital requirement in Wireless Sensor Network (WSN) applications. Such a requirement embraces different aspects, including confidentiality, integrity and authenticity of exchanged information, proper management of security material, and effective prevention and reaction against security threats and attacks. However, WSNs are mainly composed of resource-constrained devices. That is, network nodes feature reduced capabilities, especially in terms of memory storage, computing power, transmission rate, and energy availability. As a consequence, assuring secure communication in WSNs results to be more difficult than in other kinds of network. In fact, trading effectiveness of adopted solutions with their efficiency becomes far more important. In addition, specific device classes or technologies may require to design ad hoc security solutions. Also, it is necessary to efficiently manage security material, and dynamically cope with changes of security requirements. Finally, security threats and countermeasures have to be carefully considered since from the network design phase. This Ph.D. dissertion considers secure communication in WSNs, and provides the following contributions. First, we provide a performance evaluation of IEEE 802.15.4 security services. Then, we focus on the ZigBee technology and its security services, and propose possible solutions to some deficiencies and inefficiencies. Second, we present HISS, a highly scalable and efficient key management scheme, able to contrast collusion attacks while displaying a graceful degradation of performance. Third, we present STaR, a software component for WSNs that secures multiple traffic flows at the same time. It is transparent to the application, and provides runtime reconfigurability, thus coping with dynamic changes of security requirements. Finally, we describe ASF, our attack simulation framework for WSNs. Such a tool helps network designers to quantitatively evaluate effects of security attacks, produce an attack ranking based on their severity, and thus select the most appropriate countermeasures

BANZKP: a Secure Authentication Scheme Using Zero Knowledge Proof for WBANs

-Wireless body area network(WBAN) has shown great potential in improving healthcare quality not only for patients but also for medical staff. However, security and privacy are still an important issue in WBANs especially in multi-hop architectures. In this paper, we propose and present the design and the evaluation of a secure lightweight and energy efficient authentication scheme BANZKP based on an efficient cryptographic protocol, Zero Knowledge Proof (ZKP) and a commitment scheme. ZKP is used to confirm the identify of the sensor nodes, with small computational requirement, which is favorable for body sensors given their limited resources, while the commitment scheme is used to deal with replay attacks and hence the injection attacks by committing a message and revealing the key later. Our scheme reduces the memory requirement by 56.13 % compared to TinyZKP [13], the comparable alternative so far for Body Area Networks, and uses 10 % less energy

Dynamic resiliency analysis of key predistribution in wireless sensor networks

Wireless sensor networks have been analyzed for more than a decade from operational and security points of view. Several key predistribution schemes have been proposed in the literature. Although valuable and state-of-the-art proposals have been made, their corresponding security analyses have not been performed by considering the dynamic nature of networking behavior and the time dimension. The sole metric used for resiliency analysis of key predistribution schemes is "fraction of links compromised" which is roughly defined as the ratio of secure communication links that the adversary can compromise over all secure links. However, this metric does not consider the dynamic nature of the network; it just analyzes a snapshot of the network without considering the time dimension. For example, possible dead nodes may cause change of routes and some captured links become useless for the attacker as time goes by. Moreover, an attacker cannot perform sensor node capturing at once, but performs over time. That is why a methodology for dynamic security analysis is needed in order to analyze the change of resiliency in time a more realistic way. In this paper, we propose such a dynamic approach to measure the resiliency of key predistribution schemes in sensor networks. We take the time dimension into account with a new performance metric, "captured message fraction". This metric is defined as the percentage of the messages generated within the network to be forwarded to the base station (sink) that are captured and read by the attacker. Our results show that for the cases where the static fraction of links compromised metric indicates approximately 40% of the links are compromised, our proposed captured message fraction metric shows 80% of the messages are captured by the attacker. This clearly proves the limitations of the static resiliency analysis in the literature