An Inkjet Printed Chipless RFID Sensor for Wireless Humidity Monitoring

A novel chipless RFID humidity sensor based on a finite Artificial Impedance Surface (AIS) is presented. The unit cell of the AIS is composed of three concentric loops thus obtaining three deep and high Q nulls in the electromagnetic response of the tag. The wireless sensor is fabricated using low-cost inkjet printing technology on a thin sheet of commercial coated paper. The patterned surface is placed on a metal backed cardboard layer. The relative humidity information is encoded in the frequency shift of the resonance peaks. Varying the relative humidity level from 50% to 90%, the frequency shift has proven to be up to 270MHz. The position of the resonance peaks has been correlated to the relative humidity level of the environment on the basis of a high number of measurements performed in a climatic chamber, specifically designed for RF measurements of the sensor. A very low error probability of the proposed sensor is demonstrated when the device is used with a 10% RH humidity level discrimination

Compact readout system for chipless passive LC tags and its application for humidity monitoring

The development of a contactless readout system for High Frequency (HF) tags and its application to relative humidity monitoring is presented. The system consists of a Colpitts oscillator circuit whose frequency response is determined by a built-in logic counter of a microcontroller unit. The novel readout strategy is based on the frequency response change due to the inductive coupling between the coil of the Colpitts oscillator and the load impedance of a parallel LC resonator tag, as a result of the variation of the humidity sensing capacitor. The frequency is monitored with a low cost microcontroller, resulting in a simple readout circuit. This passive LC tag has been directly screen-printed on a humidity-sensitive flexible substrate. The readout circuit experimental uncertainty as frequency meter was 4 kHz in the HF band. A linear temperature drift of (-1.52 ± 0.17) kHz/⁰C was obtained, which can be used to apply thermal compensation if required. The readout system has been validated as a proof of concept for humidity measurement, obtaining a significant change of about 260 kHz in the resonance frequency of the Colpitts oscillator when relative humidity varies from 10% to 90%, with a maximum uncertainty of ±3% (±2 SD). Therefore, the proposed readout system stands as a compact, low-cost, contactless solution for chipless HF tags that avoids the use of bulky and costly equipment for the analog reading of wireless passive LC sensors.This work was supported by project CTQ2016-78754-C2-1-R from the Spanish Ministry of Economics and Competitivity. P. Escobedo wants to thank the Spanish Ministry of Education, Culture and Sport (MECD) for a pre-doctoral grant (FPU13/05032)

Screen-Printed Chipless Wireless Temperature Sensor

A chipless wireless sensor for temperature monitoring is described in this work. The sensor is fabricated by screen printing of an RLC circuit on a flexible substrate. The sensing element is a resistive carbon paste with positive temperature coefficient placed in a small area in the interconnection between the inductor and the capacitor. This sensing layer modifies the resonance frequency of the circuit when the temperature varies. We also show the influence of the sensor sensitivity with respect to the reading distance

Frequency signatured directly printable humidity sensing tag using organic electronics

In this paper chipless RFID tag, capable of carrying 9-bit data is presented. The tag is optimized for several flexible substrates. With growing information and communication technology, sensor integration with data transmission has gained significant attention. Therefore, the tag with the same dimension is then optimized using paper substrate. For different values of permittivity, the relative humidity is observed. Hence, besides carrying information bits, the tag is capable of monitoring and sensing the humidity. The overall dimension of the tag comprising of 9 ring slot resonators is 7 mm. Due to its optimization on the paper substrate, the tag can be an ideal choice for deploying in various low-cost sensing application

Readout circuit with improved sensitivity for contactless LC sensing tags

In this work we present a novel technique to estimate the resonance frequency of LC chipless tags (inductor-capacitor parallel circuit) with improved sensitivity and linearity. The developed reader measures the power consumption of a Colpitts oscillator during a frequency sweep. The readout circuit consists of a Colpitts oscillator with a coil antenna, varactor diodes to change the oscillator frequency, analog circuitry to measure the power consumption and a microcontroller to control the whole system and send the data to a PC via USB. When an LC tag is inductively coupled to the oscillator, without contact, a maximum power peak is found. As shown by an experimental calibration using an LC tag made on FR4 substrate, the frequency of this maximum is related to the resonance frequency. Both parameters, power consumption and resonance frequency, present an excellent linear dependence with a high correlation factor (R 2 = 0.995). Finally, a screen-printed LC tag has been fabricated and used as relative humidity sensor achieving a sensitivity of (−2.41 ± 0.21) kHz/% with an R 2 of 0.946

Passively-coded embedded microwave sensors for materials characterization and structural health monitoring (SHM)

Monitoring and maintaining civil, space, and aerospace infrastructure is an ongoing critical problem facing our nation. As new complex materials and structures, such as multilayer composites and inflatable habitats, become ubiquitous, performing inspection of their structural integrity becomes even more challenging. Thus, novel nondestructive testing (NDT) methods are needed. Chipless RFID is a relatively new technology that has the potential to address these needs. Chipless RFID tags have the advantage of being wireless and passive, meaning that they do not require a power source or an electronic chip. They can also be used in a variety of sensing applications including monitoring temperature, strain, moisture, and permittivity. However, these tags have yet to be used as embedded sensors. By embedding chipless RFID tags in materials, materials characterization can be performed via multi-bit sensing; that is, looking at how the multi-bit code assigned to the response of the tag changes as a function of material. This thesis develops this method through both simulation and measurement. In doing so, a new coding method and tag design are developed to better support this technique. Furthermore, inkjet-printing is explored as a manufacturing method for these tags and various measurement methods for tags including radar cross-section and microwave thermography are explored --Abstract, page iii

Sub-ppm NO2 Detection through Chipless RFID Sensor Functionalized with Reduced SnO2

NO2 is an important environmental pollutant and is harmful to human health even at very low concentrations. In this paper, we propose a novel chipless RFID sensor able to work at room temperature and to detect sub-ppm concentration of NO2 in the environment. The sensor is made of a metallic resonator covered with NO2-sensitive tin oxide and works by monitoring both the frequency and the intensity of the output signal. The experimental measurements show a fast response (a few minutes) but a very slow recovery. The sensor could therefore be used for non-continuous threshold monitoring. However, we also demonstrated that the recovery can be strongly accelerated upon exposure to a UV source. This opens the way to the reuse of the sensor, which can be easily regenerated after prolonged exposure and recycled several times

Developing Wound Moisture Sensors: Opportunities and Challenges for Laser-Induced Graphene-Based Materials

Recent advances in polymer composites have led to new, multifunctional wound dressings that can greatly improve healing processes, but assessing the moisture status of the underlying wound site still requires frequent visual inspection. Moisture is a key mediator in tissue regeneration and it has long been recognised that there is an opportunity for smart systems to provide quantitative information such that dressing selection can be optimised and nursing time prioritised. Composite technologies have a rich history in the development of moisture/humidity sensors but the challenges presented within the clinical context have been considerable. This review aims to train a spotlight on existing barriers and highlight how laser-induced graphene could lead to emerging material design strategies that could allow clinically acceptable systems to emerge

Dual-polarized chipless humidity sensor tag

In this letter, a miniaturized, flexible and high data dense dual-polarized chipless radio frequency identification (RFID) tag is presented. The tag is designed within a minuscule footprint of 29 × 29 mm2 and has the ability to encode 38-bit data. The tag is analyzed for flexible substrates including Kapton® HN DuPont™ and HP photopaper. The humidity sensing phenomenon is demonstrated by mapping the tag design, using silver nano-particle based conductive ink on HP photopaper substrate. It is observed that with the increasing moisture, the humidity sensing behavior is exhibited in RF range of 4.1–17.76 GHz. The low-cost, bendable and directly printable humidity sensor tag can be deployed in a number of intelligent tracking applications

Directly Printable Organic ASK Based Chipless RFID Tag for IoT Applications

A chipless RFID tag with unique ASK encoding technique is presented in this paper. The coding efficiency is enhanced regarding tag capacity. The amplitude variations of the backscattered RFID signal is used for encoding data instead of OOK Strips of different widths are used to have amplitude variations. The ASK technique is applied using three different substrates of Kapton (R) HN, PET, and paper. To incorporate ASK technique, dual polarized rhombic shaped resonators are designed. These tags operate in the frequency range of 3.1-10.6 GHz with size of 70 x 42 mm(2). The presented tags are flexible and offer easy printability. The paper-based decomposable organic tag appears as an ultra low-cost solution for wide scale tracking. This feature enables them to secure a prominent position in the emerging fields of IoT and green electronics