Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast

Extending the performance of hybrid NoCs beyond the limitations of network heterogeneity

To meet the performance and scalability demands of the fast-paced technological growth towards exascale and Big-Data processing with the performance bottleneck of conventional metal based interconnects (wireline), alternative interconnect fabrics such as inhomogeneous three-dimensional integrated Network-on-Chip (3D NoC) and hybrid wired-wireless Network-on-Chip (WiNoC) have emanated as a cost-effective solution for emerging System-on-Chip (SoC) design. However, these interconnects trade-off optimized performance for cost by restricting the number of area and power hungry 3D routers and wireless nodes. Moreover, the non-uniform distributed traffic in chip multiprocessor (CMP) demands an on-chip communication infrastructure which can avoid congestion under high traffic conditions while possessing minimal pipeline delay at low-load conditions. To this end, in this paper, we propose a low-latency adaptive router with a low-complexity single-cycle bypassing mechanism to alleviate the performance degradation due to the slow 2D routers in such emerging hybrid NoCs. The proposed router transmits a flit using dimension-ordered routing (DoR) in the bypass datapath at low-loads. When the output port required for intra-dimension bypassing is not available, the packet is routed adaptively to avoid congestion. The router also has a simplified virtual channel allocation (VA) scheme that yields a non-speculative low-latency pipeline. By combining the low-complexity bypassing technique with adaptive routing, the proposed router is able balance the traffic in hybrid NoCs to achieve low-latency communication under various traffic loads. Simulation shows that, the proposed router can reduce applications’ execution time by an average of 16.9% compared to low-latency routers such as SWIFT. By reducing the latency between 2D routers (or wired nodes) and 3D routers (or wireless nodes) the proposed router can improve performance efficiency in terms of average packet delay by an average of 45% (or 50%) in 3D NoCs (or WiNoCs)

Photonic packaging: transforming silicon photonic integrated circuits into photonic devices

Dedicated multi-project wafer (MPW) runs for photonic integrated circuits (PICs) from Si foundries mean that researchers and small-to-medium enterprises (SMEs) can now afford to design and fabricate Si photonic chips. While these bare Si-PICs are adequate for testing new device and circuit designs on a probe-station, they cannot be developed into prototype devices, or tested outside of the laboratory, without first packaging them into a durable module. Photonic packaging of PICs is significantly more challenging, and currently orders of magnitude more expensive, than electronic packaging, because it calls for robust micron-level alignment of optical components, precise real-time temperature control, and often a high degree of vertical and horizontal electrical integration. Photonic packaging is perhaps the most significant bottleneck in the development of commercially relevant integrated photonic devices. This article describes how the key optical, electrical, and thermal requirements of Si-PIC packaging can be met, and what further progress is needed before industrial scale-up can be achieved

Automated Hardware Prototyping for 3D Network on Chips

Vor mehr als 50 Jahren stellte Intel® Mitbegründer Gordon Moore eine Prognose zum Entwicklungsprozess der Transistortechnologie auf. Er prognostizierte, dass sich die Zahl der Transistoren in integrierten Schaltungen alle zwei Jahre verdoppeln wird. Seine Aussage ist immer noch gültig, aber ein Ende von Moores Gesetz ist in Sicht. Mit dem Ende von Moore’s Gesetz müssen neue Aspekte untersucht werden, um weiterhin die Leistung von integrierten Schaltungen zu steigern. Zwei mögliche Ansätze für "More than Moore” sind 3D-Integrationsverfahren und heterogene Systeme. Gleichzeitig entwickelt sich ein Trend hin zu Multi-Core Prozessoren, basierend auf Networks on chips (NoCs). Neben dem Ende des Mooreschen Gesetzes ergeben sich bei immer kleiner werdenden Technologiegrößen, vor allem jenseits der 60 nm, neue Herausforderungen. Eine Schwierigkeit ist die Wärmeableitung in großskalierten integrierten Schaltkreisen und die daraus resultierende Überhitzung des Chips. Um diesem Problem in modernen Multi-Core Architekturen zu begegnen, muss auch die Verlustleistung der Netzwerkressourcen stark reduziert werden. Diese Arbeit umfasst eine durch Hardware gesteuerte Kombination aus Frequenzskalierung und Power Gating für 3D On-Chip Netzwerke, einschließlich eines FPGA Prototypen. Dafür wurde ein Takt-synchrones 2D Netzwerk auf ein dreidimensionales asynchrones Netzwerk mit mehreren Frequenzbereichen erweitert. Zusätzlich wurde ein skalierbares Online-Power-Management System mit geringem Ressourcenaufwand entwickelt. Die Verifikation neuer Hardwarekomponenten ist einer der zeitaufwendigsten Schritte im Entwicklungsprozess hochintegrierter digitaler Schaltkreise. Um diese Aufgabe zu beschleunigen und um eine parallele Softwareentwicklung zu ermöglichen, wurde im Rahmen dieser Arbeit ein automatisiertes und benutzerfreundliches Tool für den Entwurf neuer Hardware Projekte entwickelt. Eine grafische Benutzeroberfläche zum Erstellen des gesamten Designablaufs, vom Erstellen der Architektur, Parameter Deklaration, Simulation, Synthese und Test ist Teil dieses Werkzeugs. Zudem stellt die Größe der Architektur für die Erstellung eines Prototypen eine besondere Herausforderung dar. Frühere Arbeiten haben es versäumt, eine schnelles und unkompliziertes Prototyping, insbesondere von Architekturen mit mehr als 50 Prozessorkernen, zu realisieren. Diese Arbeit umfasst eine Design Space Exploration und FPGA-basierte Prototypen von verschiedenen 3D-NoC Implementierungen mit mehr als 80 Prozessoren

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.Siirretty Doriast

Méthodologies de conception ASIC pour des systèmes sur puce 3D hétérogènes à base de réseaux sur puce 3D

Dans cette thèse, nous étudions les architectures 3D NoC grâce à des implémentations de conception physiques en utilisant la technologie 3D réel mis en oeuvre dans l'industrie. Sur la base des listes d'interconnexions en déroute, nous procédons à l'analyse des performances d'évaluer le bénéfice de l'architecture 3D par rapport à sa mise en oeuvre 2D. Sur la base du flot de conception 3D proposé en se concentrant sur la vérification temporelle tirant parti de l'avantage du retard négligeable de la structure de microbilles pour les connexions verticales, nous avons mené techniques de partitionnement de NoC 3D basé sur l'architecture MPSoC y compris empilement homogène et hétérogène en utilisant Tezzaron 3D IC technlogy. Conception et mise en oeuvre de compromis dans les deux méthodes de partitionnement est étudiée pour avoir un meilleur aperçu sur l'architecture 3D de sorte qu'il peut être exploitée pour des performances optimales. En utilisant l'approche 3D homogène empilage, NoC topologies est explorée afin d'identifier la meilleure topologie entre la topologie 2D et 3D pour la mise en œuvre MPSoC 3D sous l'hypothèse que les chemins critiques est fondée sur les liens inter-routeur. Les explorations architecturales ont également examiné les différentes technologies de traitement. mettant en évidence l'effet de la technologie des procédés à la performance d'architecture 3D en particulier pour l'interconnexion dominant du design. En outre, nous avons effectué hétérogène 3D d'empilage pour la mise en oeuvre MPSoC avec l'approche GALS de style et présenté plusieurs analyses de conception physiques connexes concernant la conception 3D et la mise en œuvre MPSoC utilisant des outils de CAO 2D. Une analyse plus approfondie de l'effet microbilles pas à la performance de l'architecture 3D à l'aide face-à-face d'empilement est également signalé l'identification des problèmes et des limitations à prendre en considération pendant le processus de conception.In this thesis, we study the exploration 3D NoC architectures through physical design implementations using real 3D technology used in the industry. Based on the proposed 3D design flow focusing on timing verification by leveraging the benefit of negligible delay of microbumps structure for vertical connections, we have conducted partitioning techniques for 3D NoC-based MPSoC architecture including homogeneous and heterogeneous stacking using Tezzaron 3D IC technlogy. Design and implementation trade-off in both partitioning methods is investigated to have better insight about 3D architecture so that it can be exploited for optimal performance. Using homogeneous 3D stacking approach, NoC architectures are explored to identify the best topology between 2D and 3D topology for 3D MPSoC implementation. The architectural explorations have also considered different process technologies highlighting the wire delay effect to the 3D architecture performance especially for interconnect-dominated design. Additionally, we performed heterogeneous 3D stacking of NoC-based MPSoC implementation with GALS style approach and presented several physical designs related analyses regarding 3D MPSoC design and implementation using 2D EDA tools. Finally we conducted an exploration of 2D EDA tool on different 3D architecture to evaluate the impact of 2D EDA tools on the 3D architecture performance. Since there is no commercialize 3D design tool until now, the experiment is important on the basis that designing 3D architecture using 2D EDA tools does not have a strong and direct impact to the 3D architecture performance mainly because the tools is dedicated for 2D architecture design.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Surface Plasmon Polaritons: Guided-wave Devices and Applications

The prospect of controlling the interaction of light with matter at nanoscale has been widely studied in recent years, and entails characterizing optical and optoelectronic devices at resolution higher than the diffraction limit. One technique that allows localization of light to sub-wavelength dimensions is through the use of surface plasmon polaritons (SPPs) wherein the interaction of light with free electrons on a metal surface can lead to a bound surface electromagnetic field that is confined to deep sub-wavelength dimensions. Studies based on SPPs merged with the field of nanotechnology have resulted in novel imaging technologies, nonlinear and quantum-optical devices and the ability to design materials with unusual electromagnetic properties with potential applications ranging from enhancing the efficiency of photovoltaic devices to detection of bio-molecules at ultra-small concentrations. Here we report the design of nanophotonic devices based on SPP waveguide structures that would act as a true counterpart to today’s electronic devices, providing orders of increase in data speeds while maintaining nanoscale dimensions. The devices are based on metal-dielectric-metal (MDM) waveguide structures composed of Ag/SiO2/Ag heterostructure that utilizes interference effect within multiple intersecting plasmonic waveguides. We have explored guided-wave devices such as L and T-bends, 4-way-splitters and 2x2-networked structures, wherein by altering the device geometry one can tune its operating frequency, and by changing the angle of incidence one can switch these devices between ON/OFF states. We plan to fabricate and experimentally characterize these devices for applications in color routing, directional filters and optical switches. We discuss preliminary design rules and constraints based on results obtained from finite-difference-time-domain simulations

온 칩 네트워크 설계: 매핑, 관리, 라우팅

학위논문 (박사)-- 서울대학교 대학원 : 전기·정보공학부, 2016. 2. 최기영.지난 수십 년간 이어진 반도체 기술의 향상은 매니 코어의 시대를 가져다 주었다. 우리가 일상 생활에 쓰는 데스크톱 컴퓨터조차도 이미 수 개의 코어를 가지고 있으며, 수백 개의 코어를 가진 칩도 상용화되어 있다. 이러한 많은 코어들 간의 통신 기반으로서, 네트워크-온-칩(NoC)이 새로이 대두되었으며, 이는 현재 많은 연구 및 상용 제품에서 널리 사용되고 있다. 그러나 네트워크-온-칩을 매니 코어 시스템에 사용하는 데에는 여러 가지 문제가 따르며, 본 논문에서는 그 중 몇 가지를 풀어내고자 하였다. 본 논문의 두 번째 챕터에서는 NoC 기반 매니코어 구조에 작업을 할당하고 스케쥴하는 방법을 다루었다. 매니코어에의 작업 할당을 다룬 논문은 이미 많이 출판되었지만, 본 연구는 메시지 패싱과 공유 메모리, 두 가지의 통신 방식을 고려함으로써 성능과 에너지 효율을 개선하였다. 또한, 본 연구는 역방향 의존성을 가진 작업 그래프를 스케쥴하는 방법 또한 제시하였다. 3차원 적층 기술은 높아진 전력 밀도 때문에 열 문제가 심각해지는 등, 여러 가지 도전 과제를 내포하고 있다. 세 번째 챕터에서는 DVFS 기술을 이용하여 열 문제를 완화하고자 하는 기술을 소개한다. 각 코어와 라우터가 전압, 작동 속도를 조절할 수 있는 구조에서, 가장 높은 성능을 이끌어 내면서도 최대 온도를 넘어서지 않도록 한다. 세 번째와 네 번째 챕터는 조금 다른 측면을 다룬다. 3D 적층 기술을 사용할 때, 층간 통신은 주로 TSV를 이용하여 이루어진다. 그러나 TSV는 일반 wire보다 훨씬 큰 면적을 차지하기 때문에, 전체 네트워크에서의 TSV 개수는 제한되어야 할 경우가 많다. 이 경우에는 두 가지 선택지가 있는데, 첫째는 각 층간 통신 채널의 대역폭을 줄이는 것이고, 둘째는 각 채널의 대역폭은 유지하되 일부 노드만 층간 통신이 가능한 채널을 제공하는 것이다. 우리는 각각의 경우에 대하여 라우팅 알고리즘을 하나씩 제시한다. 첫 번째 경우에 있어서는 deflection 라우팅 기법을 사용하여 층간 통신의 긴 지연 시간을 극복하고자 하였다. 층간 통신을 균등하게 분배함으로써, 제시된 알고리즘은 개선된 지연 시간을 보이며 라우터 버퍼의 제거를 통한 면적 및 에너지 효율성 또한 얻을 수 있다. 두 번째 경우에서는 층간 통신 채널을 선택하기 위한 몇 가지 규칙을 제시한다. 약간의 라우팅 자유도를 희생함으로써, 제시된 알고리즘은 기존 알고리즘의 가상 채널 요구 조건을 제거하고, 결과적으로는 성능 또는 에너지 효율의 증가를 가져 온다.For decades, advance in semiconductor technology has led us to the era of many-core systems. Today's desktop computers already have multi-core processors, and chips with more than a hundred cores are commercially available. As a communication medium for such a large number of cores, network-on-chip (NoC) has emerged out, and now is being used by many researchers and companies. Adopting NoC for a many-core system incurs many problems, and this thesis tries to solve some of them. The second chapter of this thesis is on mapping and scheduling of tasks on NoC-based CMP architectures. Although mapping on NoC has a number of papers published, our work reveals that selecting communication types between shared memory and message passing can help improve the performance and energy efficiency. Additionally, our framework supports scheduling applications containing backward dependencies with the help of modified modulo scheduling. Evolving the SoCs through 3D stacking makes us face a number of new problems, and the thermal problem coming from increased power density is one of them. In the third chapter of this thesis, we try to mitigate the hotspot problem using DVFS techniques. Assuming that all the routers as well as cores have capabilities to control voltage and frequency individually, we find voltage-frequency pairs for all cores and routers which yields the best performance within the given thermal constraint. The fourth and the fifth chapters of this thesis are from a different aspect. In 3D stacking, inter-layer interconnections are implemented using through-silicon vias (TSV). TSVs usually take much more area than normal wires. Furthermore, they also consume silicon area as well as metal area. For this reason, designers would want to limit the number of TSVs used in their network. To limit the TSV count, there are two options: the first is to reduce the width of each vertical links, and the other is to use fewer vertical links, which results in a partially connected network. We present two routing methodologies for each case. For the network with reduced bandwidth vertical links, we propose using deflection routing to mitigate the long latency of vertical links. By balancing the vertical traffics properly, the algorithm provides improved latency. Also, a large amount of area and energy reduction can be obtained by the removal of router buffers. For partially connected networks, we introduce a set of routing rules for selecting the vertical links. At the expense of sacrificing some amount of routing freedom, the proposed algorithm removes the virtual channel requirement for avoiding deadlock. As a result, the performance, or energy consumption can be reduced at the designer's choice.Chapter 1 Introduction 1 1.1 Task Mapping and Scheduling 2 1.2 Thermal Management 3 1.3 Routing for 3D Networks 5 Chapter 2 Mapping and Scheduling 9 2.1 Introduction 9 2.2 Motivation 10 2.3 Background 12 2.4 Related Work 16 2.5 Platform Description 17 2.5.1 Architcture Description 17 2.5.2 Energy Model 21 2.5.3 Communication Delay Model 22 2.6 Problem Formulation 23 2.7 Proposed Solution 25 2.7.1 Task and Communication Mapping 27 2.7.2 Communication Type Optimization 31 2.7.3 Design Space Pruning via Pre-evaluation 34 2.7.4 Scheduling 35 2.8 Experimental Results 42 2.8.1 Experiments with Coarse-grained Iterative Modulo Scheduling 42 2.8.2 Comparison with Different Mapping Algorithms 43 2.8.3 Experiments with Overall Algorithms 45 2.8.4 Experiments with Various Local Memory Sizes 47 2.8.5 Experiments with Various Placements of Shared Memory 48 Chapter 3 Thermal Management 50 3.1 Introduction 50 3.2 Background 51 3.2.1 Thermal Modeling 51 3.2.2 Heterogeneity in Thermal Propagation 52 3.3 Motivation and Problem Definition 53 3.4 Related Work 56 3.5 Orchestrated Voltage-Frequency Assignment 56 3.5.1 Individual PI Control Method 56 3.5.2 PI Controlled Weighted-Power Budgeting 57 3.5.3 Performance/Power Estimation 59 3.5.4 Frequency Assignment 62 3.5.5 Algorithm Overview 64 3.5.6 Stability Conditions for PI Controller 65 3.6 Experimental Result 66 3.6.1 Experimental Setup 66 3.6.2 Overall Algorithm Performance 68 3.6.3 Accuracy of the Estimation Model 70 3.6.4 Performance of the Frequency Assignment Algorithm 70 Chapter 4 Routing for Limited Bandwidth 3D NoC 72 4.1 Introduction 72 4.2 Motivation 73 4.3 Background 74 4.4 Related Work 75 4.5 3D Deflection Routing 76 4.5.1 Serialized TSV Model 76 4.5.2 TSV Link Injection/ejection Scheme 78 4.5.3 Deadlock Avoidance 80 4.5.4 Livelock Avoidance 84 4.5.5 Router Architecture: Putting It All Together 86 4.5.6 System Level Consideration 87 4.6 Experimental Results 89 4.6.1 Experimental Setup 89 4.6.2 Results on Synthetic Traffic Patterns 91 4.6.3 Results on Realistic Traffic Patterns 94 4.6.4 Results on Real Application Benchmarks 98 4.6.5 Fairness Issue 103 4.6.6 Area Cost Comparison 104 Chapter 5 Routing for Partially Connected 3D NoC 106 5.1 Introduction 106 5.2 Background 107 5.3 Related Work 109 5.4 Proposed Algorithm 111 5.4.1 Preliminary 112 5.4.2 Routing Algorithm for 3-D Stacked Meshes with Regular Partial Vertical Connections 115 5.4.3 Routing Algorithm for 3-D Stacked Meshes with Irregular Partial Vertical Connections 118 5.4.4 Extension to Heterogeneous Mesh Layers 122 5.5 Experimental Results 126 5.5.1 Experimental Setup 126 5.5.2 Experiments on Synthetic Traffics 128 5.5.3 Experiments on Application Benchmarks 133 5.5.4 Comparison with Reduced Bandwidth Mesh 139 Chapter 6 Conclusion 141 Bibliography 144 초록 163Docto

The thermo-mechanical behaviour of polymethyl methacrylate in roll-to-roll hot embossing of microfluidic channels

The roll-to-roll (R2R) hot embossing technique is developed from the conventional hot embossing technique, which has been a predominant method for fabricating microfluidic channels on polymeric materials, such as polymethyl methacrylate (PMMA). The benefits of R2R hot embossing are the ability to take advantage of conventional hot embossing, as well as the potential for mass production. However, the research in R2R hot embossing remains limited, with very few studies to test or simulate the process of R2R hot embossing. This thesis presents a systematic analysis of the R2R hot embossing by investigating the thermo-mechanical behaviour of PMMA.Both experimental and numerical methods have been used to understand the R2R hot embossing of PMMA-based microfluidic channels. For the experimental method, a series of R2R hot embossing trials have been conducted on a PMMA film with a custom-designed generic shim. The shim contains straight line features with a relief height of 40 µm and different line widths. The trial experiment runs at different embossing temperatures from 105 to 110 °C at every one degree, while other process parameters, such as nip pressure and web moving speed, are kept constant. The numerical method employs calibration data from tensile tests and DMA to simulate the formation of microfluidic channels in the cross-sectional area using the finite element simulation package, Abaqus/Standard. A Python script has been written to automatically generate input files for these simulations.From experimental trials of R2R hot embossing it has demonstrated that at temperatures close to Tg, there are nearly no embossed features. The transfer rate, which is calculated by dividing the highest channel depth by the stamp height, increases with line widths. The highest transfer rate is 51.3% when the a 1-mm-wide line feature is embossed at 109 °C. The simulation method employs a parallel network model with viscoplastic components calibrated from test data ranging from 90 to 110 °C and strain rate ranging from 0.001 to 0.1/s. The calibrated data agrees well with the test data, and shows reasonable accuracy in predicting the cross-sectional profile of microfluidic channels. The Python script has been proved to be an efficient way for such numerical predictions under different process parameters. These findings have been generated to provide for guidance for microfluidic chip designers to modify shim layouts, and for process engineers to optimise the process parameters of R2R hot embossing.</div