A multi-level functional IR with rewrites for higher-level synthesis of accelerators

Specialised accelerators deliver orders of magnitude higher energy-efficiency than general-purpose processors. Field Programmable Gate Arrays (FPGAs) have become the substrate of choice, because the ever-changing nature of modern workloads, such as machine learning, demands reconfigurability. However, they are notoriously hard to program directly using Hardware Description Languages (HDLs). Traditional High-Level Synthesis (HLS) tools improve productivity, but come with their own problems. They often produce sub-optimal designs and programmers are still required to write hardware-specific code, thus development cycles remain long. This thesis proposes Shir, a higher-level synthesis approach for high-performance accelerator design with a hardware-agnostic programming entry point, a multi-level Intermediate Representation (IR), a compiler and rewrite rules for optimisation. First, a novel, multi-level functional IR structure for accelerator design is described. The IRs operate on different levels of abstraction, cleanly separating different hardware concerns. They enable the expression of different forms of parallelism and standard memory features, such as asynchronous off-chip memories or synchronous on-chip buffers, as well as arbitration of such shared resources. Exposing these features at the IR level is essential for achieving high performance. Next, mechanical lowering procedures are introduced to automatically compile a program specification through Shir’s functional IRs until low-level HDL code for FPGA synthesis is emitted. Each lowering step gradually adds implementation details. Finally, this thesis presents rewrite rules for automatic optimisations around parallelisation, buffering and data reshaping. Reshaping operations pose a challenge to functional approaches in particular. They introduce overheads that compromise performance or even prevent the generation of synthesisable hardware designs altogether. This fundamental issue is solved by the application of rewrite rules. The viability of this approach is demonstrated by running matrix multiplication and 2D convolution on an Intel Arria 10 FPGA. A limited design space exploration is conducted, confirming the ability of the IR to exploit various hardware features. Using rewrite rules for optimisation, it is possible to generate high-performance designs that are competitive with highly tuned OpenCL implementations and that outperform hardware-agnostic OpenCL code. The performance impact of the optimisations is further evaluated showing that they are essential to achieving high performance, and in many cases also necessary to produce hardware that fits the resource constraints

New Fault Detection, Mitigation and Injection Strategies for Current and Forthcoming Challenges of HW Embedded Designs

Tesis por compendio[EN] Relevance of electronics towards safety of common devices has only been growing, as an ever growing stake of the functionality is assigned to them. But of course, this comes along the constant need for higher performances to fulfill such functionality requirements, while keeping power and budget low. In this scenario, industry is struggling to provide a technology which meets all the performance, power and price specifications, at the cost of an increased vulnerability to several types of known faults or the appearance of new ones. To provide a solution for the new and growing faults in the systems, designers have been using traditional techniques from safety-critical applications, which offer in general suboptimal results. In fact, modern embedded architectures offer the possibility of optimizing the dependability properties by enabling the interaction of hardware, firmware and software levels in the process. However, that point is not yet successfully achieved. Advances in every level towards that direction are much needed if flexible, robust, resilient and cost effective fault tolerance is desired. The work presented here focuses on the hardware level, with the background consideration of a potential integration into a holistic approach. The efforts in this thesis have focused several issues: (i) to introduce additional fault models as required for adequate representativity of physical effects blooming in modern manufacturing technologies, (ii) to provide tools and methods to efficiently inject both the proposed models and classical ones, (iii) to analyze the optimum method for assessing the robustness of the systems by using extensive fault injection and later correlation with higher level layers in an effort to cut development time and cost, (iv) to provide new detection methodologies to cope with challenges modeled by proposed fault models, (v) to propose mitigation strategies focused towards tackling such new threat scenarios and (vi) to devise an automated methodology for the deployment of many fault tolerance mechanisms in a systematic robust way. The outcomes of the thesis constitute a suite of tools and methods to help the designer of critical systems in his task to develop robust, validated, and on-time designs tailored to his application.[ES] La relevancia que la electrónica adquiere en la seguridad de los productos ha crecido inexorablemente, puesto que cada vez ésta copa una mayor influencia en la funcionalidad de los mismos. Pero, por supuesto, este hecho viene acompañado de una necesidad constante de mayores prestaciones para cumplir con los requerimientos funcionales, al tiempo que se mantienen los costes y el consumo en unos niveles reducidos. En este escenario, la industria está realizando esfuerzos para proveer una tecnología que cumpla con todas las especificaciones de potencia, consumo y precio, a costa de un incremento en la vulnerabilidad a múltiples tipos de fallos conocidos o la introducción de nuevos. Para ofrecer una solución a los fallos nuevos y crecientes en los sistemas, los diseñadores han recurrido a técnicas tradicionalmente asociadas a sistemas críticos para la seguridad, que ofrecen en general resultados sub-óptimos. De hecho, las arquitecturas empotradas modernas ofrecen la posibilidad de optimizar las propiedades de confiabilidad al habilitar la interacción de los niveles de hardware, firmware y software en el proceso. No obstante, ese punto no está resulto todavía. Se necesitan avances en todos los niveles en la mencionada dirección para poder alcanzar los objetivos de una tolerancia a fallos flexible, robusta, resiliente y a bajo coste. El trabajo presentado aquí se centra en el nivel de hardware, con la consideración de fondo de una potencial integración en una estrategia holística. Los esfuerzos de esta tesis se han centrado en los siguientes aspectos: (i) la introducción de modelos de fallo adicionales requeridos para la representación adecuada de efectos físicos surgentes en las tecnologías de manufactura actuales, (ii) la provisión de herramientas y métodos para la inyección eficiente de los modelos propuestos y de los clásicos, (iii) el análisis del método óptimo para estudiar la robustez de sistemas mediante el uso de inyección de fallos extensiva, y la posterior correlación con capas de más alto nivel en un esfuerzo por recortar el tiempo y coste de desarrollo, (iv) la provisión de nuevos métodos de detección para cubrir los retos planteados por los modelos de fallo propuestos, (v) la propuesta de estrategias de mitigación enfocadas hacia el tratamiento de dichos escenarios de amenaza y (vi) la introducción de una metodología automatizada de despliegue de diversos mecanismos de tolerancia a fallos de forma robusta y sistemática. Los resultados de la presente tesis constituyen un conjunto de herramientas y métodos para ayudar al diseñador de sistemas críticos en su tarea de desarrollo de diseños robustos, validados y en tiempo adaptados a su aplicación.[CA] La rellevància que l'electrònica adquireix en la seguretat dels productes ha crescut inexorablement, puix cada volta més aquesta abasta una major influència en la funcionalitat dels mateixos. Però, per descomptat, aquest fet ve acompanyat d'un constant necessitat de majors prestacions per acomplir els requeriments funcionals, mentre es mantenen els costos i consums en uns nivells reduïts. Donat aquest escenari, la indústria està fent esforços per proveir una tecnologia que complisca amb totes les especificacions de potència, consum i preu, tot a costa d'un increment en la vulnerabilitat a diversos tipus de fallades conegudes, i a la introducció de nous tipus. Per oferir una solució a les noves i creixents fallades als sistemes, els dissenyadors han recorregut a tècniques tradicionalment associades a sistemes crítics per a la seguretat, que en general oferixen resultats sub-òptims. De fet, les arquitectures empotrades modernes oferixen la possibilitat d'optimitzar les propietats de confiabilitat en habilitar la interacció dels nivells de hardware, firmware i software en el procés. Tot i això eixe punt no està resolt encara. Es necessiten avanços a tots els nivells en l'esmentada direcció per poder assolir els objectius d'una tolerància a fallades flexible, robusta, resilient i a baix cost. El treball ací presentat se centra en el nivell de hardware, amb la consideració de fons d'una potencial integració en una estratègia holística. Els esforços d'esta tesi s'han centrat en els següents aspectes: (i) la introducció de models de fallada addicionals requerits per a la representació adequada d'efectes físics que apareixen en les tecnologies de fabricació actuals, (ii) la provisió de ferramentes i mètodes per a la injecció eficient del models proposats i dels clàssics, (iii) l'anàlisi del mètode òptim per estudiar la robustesa de sistemes mitjançant l'ús d'injecció de fallades extensiva, i la posterior correlació amb capes de més alt nivell en un esforç per retallar el temps i cost de desenvolupament, (iv) la provisió de nous mètodes de detecció per cobrir els reptes plantejats pels models de fallades proposats, (v) la proposta d'estratègies de mitigació enfocades cap al tractament dels esmentats escenaris d'amenaça i (vi) la introducció d'una metodologia automatitzada de desplegament de diversos mecanismes de tolerància a fallades de forma robusta i sistemàtica. Els resultats de la present tesi constitueixen un conjunt de ferramentes i mètodes per ajudar el dissenyador de sistemes crítics en la seua tasca de desenvolupament de dissenys robustos, validats i a temps adaptats a la seua aplicació.Espinosa García, J. (2016). New Fault Detection, Mitigation and Injection Strategies for Current and Forthcoming Challenges of HW Embedded Designs [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/73146TESISCompendi

Efficient implementation of video processing algorithms on FPGA

The work contained in this portfolio thesis was carried out as part of an Engineering Doctorate (Eng.D) programme from the Institute for System Level Integration. The work was sponsored by Thales Optronics, and focuses on issues surrounding the implementation of video processing algorithms on field programmable gate arrays (FPGA). A description is given of FPGA technology and the currently dominant methods of designing and verifying firmware. The problems of translating a description of behaviour into one of structure are discussed, and some of the latest methodologies for tackling this problem are introduced. A number of algorithms are then looked at, including methods of contrast enhancement, deconvolution, and image fusion. Algorithms are characterised according to the nature of their execution flow, and this is used as justification for some of the design choices that are made. An efficient method of performing large two-dimensional convolutions is also described. The portfolio also contains a discussion of an FPGA implementation of a PID control algorithm, an overview of FPGA dynamic reconfigurability, and the development of a demonstration platform for rapid deployment of video processing algorithms in FPGA hardware

Systematic Model-based Design Assurance and Property-based Fault Injection for Safety Critical Digital Systems

With advances in sensing, wireless communications, computing, control, and automation technologies, we are witnessing the rapid uptake of Cyber-Physical Systems across many applications including connected vehicles, healthcare, energy, manufacturing, smart homes etc. Many of these applications are safety-critical in nature and they depend on the correct and safe execution of software and hardware that are intrinsically subject to faults. These faults can be design faults (Software Faults, Specification faults, etc.) or physically occurring faults (hardware failures, Single-event-upsets, etc.). Both types of faults must be addressed during the design and development of these critical systems. Several safety-critical industries have widely adopted Model-Based Engineering paradigms to manage the design assurance processes of these complex CPSs. This thesis studies the application of IEC 61508 compliant model-based design assurance methodology on a representative safety-critical digital architecture targeted for the Nuclear power generation facilities. The study presents detailed experiences and results to demonstrate the benefits of Model testing in finding design flaws and its relevance to subsequent verification steps in the workflow. Additionally, to study the impact of physical faults on the digital architecture we develop a novel property-based fault injection method that overcomes few deficiencies of traditional fault injection methods. The model-based fault injection approach presented here guarantees high efficiency and near-exhaustive input/state/fault space coverage, by utilizing formal model checking principles to identify fault activation conditions and prove the fault tolerance features. The fault injection framework facilitates automated integration of fault saboteurs throughout the model to enable exhaustive fault location coverage in the model

Describing and Simulating Dynamic Reconfiguration in SystemC Exemplified by a Dedicated 3D Collision Detection Hardware

The ongoing trend towards development of parallel software and the increased flexibility of state-of-the-art programmable logic devices are currently converging in the field of reconfigurable hardware. On the other hand there is the traditional hardware market, with its increasingly short development cycles, which is mainly driven by high-level prototyping of products. To enable the design community to conveniently develop reconfigurable architectures in a short time-to-market, this thesis introduces the library ReChannel, which extends SystemC with advanced language constructs for high level reconfiguration modelling. It combines IP reuse and high-level modelling with reconfiguration. The proposed methodology was tested on a hierarchical FPGA-based 3D collision detection accelerator, is also presented. To enable implementation of such a complex algorithm in FPGA logic it had to be implemented using fixed-point arithmetic. Therefore a special method was derived that enables rounding of the used bounding-volumes without incurring the correctness of the non-intersection reports. This guarantees a correct overall result. A bound on the rounding error was derived that gives a measure of the number of false intersection reports, and thus on the run-time. A triangle and a quadrangle intersection test were implemented as the second</p

Wireless extension to the existing SystemC design methodology

This research uses a SystemC design methodology to model and design complex wireless communication systems, because in the recent years, the complexity of wireless communication systems has increased and the modelling and design of such systems has become inefficient and challenging. The most important aspect of modelling wireless communication systems is that system design choices may affect the communication behaviour and also communication design choices may impact on the system design. Whilst, the SystemC modelling language shows great promise in the modelling of complex hardware/software systems, it still lacks a standard framework that supports modelling of wireless communication systems (particularly the use of wireless communication channels). SystemC lacks elements and components that can be used to express and simulate wireless systems. It does not support noise links natively. To fill this gap, this research proposes to extend the existing SystemC design methodology to include an efficient simulation of wireless systems. It proposes to achieve this by employing a system-level model of a noisy wireless communication channel, along with a small repertoire of standard components (which of course can be replaced on a per application basis). Finally, to validate our developed methodology, a flocking behaviour system is selected as a demonstration (case study). This is a very complex system modelled based on the developed methodology and partitioned along different parameters. By applying our developed methodology to model this system as a case study, we can prove that incorporating and fixing the wireless channel, wireless protocol, noise or all of these elements early in the design methodology is very advantageous. The modelled system is introduced to simulate the behaviour of the particles (mobile units) that form a mobile ad-hoc communication network. Wireless communication between particles is addressed with two scenarios: the first is created using a wireless channel model to link each pair of particles, which means the wireless communication between particles is addressed using a Point-to-Point (P2P) channel; the other scenario is created using a shared channel (broadcast link). Therefore, incorporating wireless features into existing SystemC design methodology, as done in this research, is a very important task, because by developing SystemC as a design tool to support wireless systems, hardware aspects, software parts and communication can be modelled, refined and validated simultaneously on the same platform, and the design space expanded into a two-dimensional design space comprising system and communication