4,171 research outputs found
Mapping constrained optimization problems to quantum annealing with application to fault diagnosis
Current quantum annealing (QA) hardware suffers from practical limitations
such as finite temperature, sparse connectivity, small qubit numbers, and
control error. We propose new algorithms for mapping boolean constraint
satisfaction problems (CSPs) onto QA hardware mitigating these limitations. In
particular we develop a new embedding algorithm for mapping a CSP onto a
hardware Ising model with a fixed sparse set of interactions, and propose two
new decomposition algorithms for solving problems too large to map directly
into hardware.
The mapping technique is locally-structured, as hardware compatible Ising
models are generated for each problem constraint, and variables appearing in
different constraints are chained together using ferromagnetic couplings. In
contrast, global embedding techniques generate a hardware independent Ising
model for all the constraints, and then use a minor-embedding algorithm to
generate a hardware compatible Ising model. We give an example of a class of
CSPs for which the scaling performance of D-Wave's QA hardware using the local
mapping technique is significantly better than global embedding.
We validate the approach by applying D-Wave's hardware to circuit-based
fault-diagnosis. For circuits that embed directly, we find that the hardware is
typically able to find all solutions from a min-fault diagnosis set of size N
using 1000N samples, using an annealing rate that is 25 times faster than a
leading SAT-based sampling method. Further, we apply decomposition algorithms
to find min-cardinality faults for circuits that are up to 5 times larger than
can be solved directly on current hardware.Comment: 22 pages, 4 figure
Feedback Control Goes Wireless: Guaranteed Stability over Low-power Multi-hop Networks
Closing feedback loops fast and over long distances is key to emerging
applications; for example, robot motion control and swarm coordination require
update intervals of tens of milliseconds. Low-power wireless technology is
preferred for its low cost, small form factor, and flexibility, especially if
the devices support multi-hop communication. So far, however, feedback control
over wireless multi-hop networks has only been shown for update intervals on
the order of seconds. This paper presents a wireless embedded system that tames
imperfections impairing control performance (e.g., jitter and message loss),
and a control design that exploits the essential properties of this system to
provably guarantee closed-loop stability for physical processes with linear
time-invariant dynamics. Using experiments on a cyber-physical testbed with 20
wireless nodes and multiple cart-pole systems, we are the first to demonstrate
and evaluate feedback control and coordination over wireless multi-hop networks
for update intervals of 20 to 50 milliseconds.Comment: Accepted final version to appear in: 10th ACM/IEEE International
Conference on Cyber-Physical Systems (with CPS-IoT Week 2019) (ICCPS '19),
April 16--18, 2019, Montreal, QC, Canad
A time-predictable many-core processor design for critical real-time embedded systems
Critical Real-Time Embedded Systems (CRTES) are in charge of controlling fundamental parts of embedded system, e.g. energy harvesting solar panels in satellites, steering and breaking in cars, or flight management systems in airplanes. To do so, CRTES require strong evidence of correct functional and timing behavior. The former guarantees that the system operates correctly in response of its inputs; the latter ensures that its operations are performed within a predefined time budget.
CRTES aim at increasing the number and complexity of functions. Examples include the incorporation of \smarter" Advanced Driver Assistance System (ADAS) functionality in modern cars or advanced collision avoidance systems in Unmanned Aerial Vehicles (UAVs). All these new features, implemented in software, lead to an exponential growth in both performance requirements and software development complexity. Furthermore, there is a strong need to integrate multiple functions into the same computing platform to reduce the number of processing units, mass and space requirements, etc. Overall, there is a clear need to increase the computing power of current CRTES in order to support new sophisticated and complex functionality, and integrate multiple systems into a single platform.
The use of multi- and many-core processor architectures is increasingly seen in the CRTES industry as the solution to cope with the performance demand and cost constraints of future CRTES. Many-cores supply higher performance by exploiting the parallelism of applications while providing a better performance per watt as cores are maintained simpler with respect to complex single-core processors. Moreover, the parallelization capabilities allow scheduling multiple functions into the same processor, maximizing the hardware utilization.
However, the use of multi- and many-cores in CRTES also brings a number of challenges related to provide evidence about the correct operation of the system, especially in the timing domain. Hence, despite the advantages of many-cores and the fact that they are nowadays a reality in the embedded domain (e.g. Kalray MPPA, Freescale NXP P4080, TI Keystone II), their use in CRTES still requires finding efficient ways of providing reliable evidence about the correct operation of the system.
This thesis investigates the use of many-core processors in CRTES as a means to satisfy performance demands of future complex applications while providing the necessary timing guarantees. To do so, this thesis contributes to advance the state-of-the-art towards the exploitation of parallel capabilities of many-cores in CRTES contributing in two different computing domains. From the hardware domain, this thesis proposes new many-core designs that enable deriving reliable and tight timing guarantees. From the software domain, we present efficient scheduling and timing analysis techniques to exploit the parallelization capabilities of many-core architectures and to derive tight and trustworthy Worst-Case Execution Time (WCET) estimates of CRTES.Los sistemas crÃticos empotrados de tiempo real (en ingles Critical Real-Time Embedded Systems, CRTES) se encargan de controlar partes fundamentales de los sistemas integrados, e.g. obtención de la energÃa de los paneles solares en satélites, la dirección y frenado en automóviles, o el control de vuelo en aviones. Para hacerlo, CRTES requieren fuerte evidencias del correcto comportamiento funcional y temporal. El primero garantiza que el sistema funciona correctamente en respuesta de sus entradas; el último asegura que sus operaciones se realizan dentro de unos limites temporales establecidos previamente. El objetivo de los CRTES es aumentar el número y la complejidad de las funciones. Algunos ejemplos incluyen los sistemas inteligentes de asistencia a la conducción en automóviles modernos o los sistemas avanzados de prevención de colisiones en vehiculos aereos no tripulados. Todas estas nuevas caracterÃsticas, implementadas en software,conducen a un crecimiento exponencial tanto en los requerimientos de rendimiento como en la complejidad de desarrollo de software. Además, existe una gran necesidad de integrar múltiples funciones en una sóla plataforma para asà reducir el número de unidades de procesamiento, cumplir con requisitos de peso y espacio, etc. En general, hay una clara necesidad de aumentar la potencia de cómputo de los actuales CRTES para soportar nueva funcionalidades sofisticadas y complejas e integrar múltiples sistemas en una sola plataforma. El uso de arquitecturas multi- y many-core se ve cada vez más en la industria CRTES como la solución para hacer frente a la demanda de mayor rendimiento y las limitaciones de costes de los futuros CRTES. Las arquitecturas many-core proporcionan un mayor rendimiento explotando el paralelismo de aplicaciones al tiempo que proporciona un mejor rendimiento por vatio ya que los cores se mantienen más simples con respecto a complejos procesadores de un solo core. Además, las capacidades de paralelización permiten programar múltiples funciones en el mismo procesador, maximizando la utilización del hardware. Sin embargo, el uso de multi- y many-core en CRTES también acarrea ciertos desafÃos relacionados con la aportación de evidencias sobre el correcto funcionamiento del sistema, especialmente en el ámbito temporal. Por eso, a pesar de las ventajas de los procesadores many-core y del hecho de que éstos son una realidad en los sitemas integrados (por ejemplo Kalray MPPA, Freescale NXP P4080, TI Keystone II), su uso en CRTES aún precisa de la búsqueda de métodos eficientes para proveer evidencias fiables sobre el correcto funcionamiento del sistema. Esta tesis ahonda en el uso de procesadores many-core en CRTES como un medio para satisfacer los requisitos de rendimiento de aplicaciones complejas mientras proveen las garantÃas de tiempo necesarias. Para ello, esta tesis contribuye en el avance del estado del arte hacia la explotación de many-cores en CRTES en dos ámbitos de la computación. En el ámbito del hardware, esta tesis propone nuevos diseños many-core que posibilitan garantÃas de tiempo fiables y precisas. En el ámbito del software, la tesis presenta técnicas eficientes para la planificación de tareas y el análisis de tiempo para aprovechar las capacidades de paralelización en arquitecturas many-core, y también para derivar estimaciones de peor tiempo de ejecución (Worst-Case Execution Time, WCET) fiables y precisas
Schedulability Analysis for Certification-friendly Multicore Systems
This paper presents a new schedulability test for safety-critical software undergoing a transition from single-core to multicore systems - a challenge faced by multiple industries today. Our migration model, consisting of a schedulability test and execution model, is distinguished by three aspects consistent with reducing transition cost. First, it assumes externally-driven scheduling parameters, such as periods and deadlines, remain fixed (and thus known), whereas exact computation times are not. Second, it adopts a globally synchronized conflict-free I/O model that leads to a decoupling between cores, simplifying the schedulability analysis. Third, it employs global priority assignment across all tasks on each core, irrespective of application, where budget constraints on each application ensure isolation. These properties enable us to obtain a utilization bound that places an allowable limit on total task execution times. Evaluation results demonstrate the advantages of our scheduling model over competing resource partitioning approaches, such as Periodic Server and TDMA.Ope
Easier Parallel Programming with Provably-Efficient Runtime Schedulers
Over the past decade processor manufacturers have pivoted from increasing uniprocessor performance to multicore architectures. However, utilizing this computational power has proved challenging for software developers. Many concurrency platforms and languages have emerged to address parallel programming challenges, yet writing correct and performant parallel code retains a reputation of being one of the hardest tasks a programmer can undertake.
This dissertation will study how runtime scheduling systems can be used to make parallel programming easier. We address the difficulty in writing parallel data structures, automatically finding shared memory bugs, and reproducing non-deterministic synchronization bugs. Each of the systems presented depends on a novel runtime system which provides strong theoretical performance guarantees and performs well in practice
Predictable embedded multiprocessor architecture for streaming applications
The focus of this thesis is on embedded media systems that execute applications from the application domain car infotainment. These applications, which we refer to as jobs, typically fall in the class of streaming, i.e. they process on a stream of data. The jobs are executed on heterogeneous multiprocessor platforms, for performance and power efficiency reasons. Most of these jobs have firm real-time requirements, like throughput and end-to-end latency. Car-infotainment systems become increasingly more complex, due to an increase in the supported number of jobs and an increase of resource sharing. Therefore, it is hard to verify, for each job, that the realtime requirements are satisfied. To reduce the verification effort, we elaborate on an architecture for a predictable system from which we can verify, at design time, that the job’s throughput and end-to-end latency requirements are satisfied. This thesis introduces a network-based multiprocessor system that is predictable. This is achieved by starting with an architecture where processors have private local memories and execute tasks in a static order, so that the uncertainty in the temporal behaviour is minimised. As an interconnect, we use a network that supports guaranteed communication services so that it is guaranteed that data is delivered in time. The architecture is extended with shared local memories, run-time scheduling of tasks, and a memory hierarchy. Dataflow modelling and analysis techniques are used for verification, because they allow cyclic data dependencies that influence the job’s performance. Shown is how to construct a dataflow model from a job that is mapped onto our predictable multiprocessor platforms. This dataflow model takes into account: computation of tasks, communication between tasks, buffer capacities, and scheduling of shared resources. The job’s throughput and end-to-end latency bounds are derived from a self-timed execution of the dataflow graph, by making use of existing dataflow-analysis techniques. It is shown that the derived bounds are tight, e.g. for our channel equaliser job, the accuracy of the derived throughput bound is within 10.1%. Furthermore, it is shown that the dataflow modelling and analysis techniques can be used despite the use of shared memories, run-time scheduling of tasks, and caches
Limits on Fundamental Limits to Computation
An indispensable part of our lives, computing has also become essential to
industries and governments. Steady improvements in computer hardware have been
supported by periodic doubling of transistor densities in integrated circuits
over the last fifty years. Such Moore scaling now requires increasingly heroic
efforts, stimulating research in alternative hardware and stirring controversy.
To help evaluate emerging technologies and enrich our understanding of
integrated-circuit scaling, we review fundamental limits to computation: in
manufacturing, energy, physical space, design and verification effort, and
algorithms. To outline what is achievable in principle and in practice, we
recall how some limits were circumvented, compare loose and tight limits. We
also point out that engineering difficulties encountered by emerging
technologies may indicate yet-unknown limits.Comment: 15 pages, 4 figures, 1 tabl
- …