319,513 research outputs found
Analysis of a rotating advanced-technology space station for the year 2025
An analysis is made of several aspects of an advanced-technology rotating space station configuration generated under a previous study. The analysis includes examination of several modifications of the configuration, interface with proposed launch systems, effects of low-gravity environment on human subjects, and the space station assembly sequence. Consideration was given also to some aspects of space station rotational dynamics, surface charging, and the possible application of tethers
Spectroscopic and theoretical approaches for studying radical reactions in class I ribonucleotide reductase
Ribonucleotide reductases (RNRs) catalyze the production of deoxyribonucleotides, which are essential for DNA synthesis and repair in all organisms. The three currently known classes of RNRs are postulated to utilize a similar mechanism for ribonucleotide reduction via a transient thiyl radical, but they differ in the way this radical is generated. Class I RNR, found in all eukaryotic organisms and in some eubacteria and viruses, employs a diferric iron center and a stable tyrosyl radical in a second protein subunit, R2, to drive thiyl radical generation near the substrate binding site in subunit R1. From extensive experimental and theoretical research during the last decades, a general mechanistic model for class I RNR has emerged, showing three major mechanistic steps: generation of the tyrosyl radical by the diiron center in subunit R2, radical transfer to generate the proposed thiyl radical near the substrate bound in subunit R1, and finally catalytic reduction of the bound ribonucleotide. Amino acid- or substrate-derived radicals are involved in all three major reactions. This article summarizes the present mechanistic picture of class I RNR and highlights experimental and theoretical approaches that have contributed to our current understanding of this important class of radical enzymes
Benefits from synergies and advanced technologies for an advanced-technology space station
A configuration for a second-generation advanced technology space station has been defined in a series of NASA-sponsored studies. Definitions of subsystems specifically addressed opportunities for beneficial synergistic interactions and those potential synergies and their benefits are identified. One of the more significant synergistic benefits involves the multi-function utilization of water within a large system that generates artificial gravity by rotation. In such a system, water not only provides the necessary crew life support, but also serves as counterrotator mass, as moveable ballast, and as a source for propellant gases. Additionally, the synergistic effects between advanced technology materials, operation at reduced artificial gravity, and lower cabin atmospheric pressure levels show beneficial interactions that can be quantified in terms of reduced mass to orbit
The Maunakea Spectroscopic Explorer Book 2018
(Abridged) This is the Maunakea Spectroscopic Explorer 2018 book. It is
intended as a concise reference guide to all aspects of the scientific and
technical design of MSE, for the international astronomy and engineering
communities, and related agencies. The current version is a status report of
MSE's science goals and their practical implementation, following the System
Conceptual Design Review, held in January 2018. MSE is a planned 10-m class,
wide-field, optical and near-infrared facility, designed to enable
transformative science, while filling a critical missing gap in the emerging
international network of large-scale astronomical facilities. MSE is completely
dedicated to multi-object spectroscopy of samples of between thousands and
millions of astrophysical objects. It will lead the world in this arena, due to
its unique design capabilities: it will boast a large (11.25 m) aperture and
wide (1.52 sq. degree) field of view; it will have the capabilities to observe
at a wide range of spectral resolutions, from R2500 to R40,000, with massive
multiplexing (4332 spectra per exposure, with all spectral resolutions
available at all times), and an on-target observing efficiency of more than
80%. MSE will unveil the composition and dynamics of the faint Universe and is
designed to excel at precision studies of faint astrophysical phenomena. It
will also provide critical follow-up for multi-wavelength imaging surveys, such
as those of the Large Synoptic Survey Telescope, Gaia, Euclid, the Wide Field
Infrared Survey Telescope, the Square Kilometre Array, and the Next Generation
Very Large Array.Comment: 5 chapters, 160 pages, 107 figure
Rotorcraft technology at Boeing Vertol: Recent advances
An overview is presented of key accomplishments in the rotorcraft development at Boeing Vertol. Projects of particular significance: high speed rotor development and the Model 360 Advanced Technology Helicopter. Areas addressed in the overview are: advanced rotors with reduced noise and vibration, 3-D aerodynamic modeling, flight control and avionics, active control, automated diagnostics and prognostics, composite structures, and drive systems
Nanowire Zinc Oxide MOSFET Pressure Sensor
Fabrication and characterization of a new kind of pressure sensor using self-assembly Zinc Oxide (ZnO) nanowires on top of the gate of a Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) is presented. Self-assembly ZnO nanowires were fabricated with a diameter of 80 nm and 800 nm height (80:8 aspect ratio) on top of the gate of the MOSFET. The sensor showed a 110% response in the drain current due to pressure, even with the expected piezoresistive response of the silicon device removed from the measurement. The pressure sensor was fabricated through low temperature bottom up ultrahigh aspect ratio ZnO nanowire growth using anodic alumina oxide (AAO) templates. The pressure sensor has two main components: MOSFET and ZnO nanowires. Silicon Dioxide growth, photolithography, dopant diffusion, and aluminum metallization were used to fabricate a basic MOSFET. In the other hand, a combination of aluminum anodization, alumina barrier layer removal, ZnO atomic layer deposition (ALD), and wet etching for nanowire release were optimized to fabricate the sensor on a silicon wafer. The ZnO nanowire fabrication sequence presented is at low temperature making it compatible with CMOS technology
A Physiologically Based System Theory of Consciousness
A system which uses large numbers of devices to perform a complex functionality is forced to adopt a simple functional architecture by the needs to construct copies of, repair, and modify the system. A simple functional architecture means that functionality is partitioned into relatively equal sized components on many levels of detail down to device level, a mapping exists between the different levels, and exchange of information between components is minimized. In the instruction architecture functionality is partitioned on every level into instructions, which exchange unambiguous system information and therefore output system commands. The von Neumann architecture is a special case of the instruction architecture in which instructions are coded as unambiguous system information. In the recommendation (or pattern extraction) architecture functionality is partitioned on every level into repetition elements, which can freely exchange ambiguous information and therefore output only system action recommendations which must compete for control of system behavior. Partitioning is optimized to the best tradeoff between even partitioning and minimum cost of distributing data. Natural pressures deriving from the need to construct copies under DNA control, recover from errors, failures and damage, and add new functionality derived from random mutations has resulted in biological brains being constrained to adopt the recommendation architecture. The resultant hierarchy of functional separations can be the basis for understanding psychological phenomena in terms of physiology. A theory of consciousness is described based on the recommendation architecture model for biological brains. Consciousness is defined at a high level in terms of sensory independent image sequences including self images with the role of extending the search of records of individual experience for behavioral guidance in complex social situations. Functional components of this definition of consciousness are developed, and it is demonstrated that these components can be translated through subcomponents to descriptions in terms of known and postulated physiological mechanisms
Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC
While the tracking detectors of the ATLAS and CMS experiments have shown
excellent performance in Run 1 of LHC data taking, and are expected to continue
to do so during LHC operation at design luminosity, both experiments will have
to exchange their tracking systems when the LHC is upgraded to the
high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems
need to operate in an environment in which both the hit densities and the
radiation damage will be about an order of magnitude higher than today. In
addition, the new trackers need to contribute to the first level trigger in
order to maintain a high data-taking efficiency for the interesting processes.
Novel detector technologies have to be developed to meet these very challenging
goals. The German groups active in the upgrades of the ATLAS and CMS tracking
systems have formed a collaborative "Project on Enabling Technologies for
Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was
supported by the Helmholtz Alliance "Physics at the Terascale" during the years
2013 and 2014. The aim of the project was to share experience and to work
together on key areas of mutual interest during the R&D phase of these
upgrades. The project concentrated on five areas, namely exchange of
experience, radiation hardness of silicon sensors, low mass system design,
automated precision assembly procedures, and irradiations. This report
summarizes the main achievements
Recommended from our members
High power 405 nm diode laser fiber-coupled single-mode system with high long-term stability
Fiber-coupled 405 nm diode laser systems are rarely used with fiber output powers higher than 50 mW. A quick degradation of fiber-coupled high power modules with wavelengths in the lower range of the visible spectrum is known for several years. Meanwhile, the typical power of single-mode diode lasers around 400 nm is in the order of 100 to 300 mW, leading to single-mode fiber core power densities in the 1 MW/cm² range. This is three magnitudes of order below the known threshold for optical damage. Our profound investigations on the influence of 405 nm laser light irradiation of single-mode fibers found the growth of periodic surface structures in the form of ripples responsible for the power loss. The ripples are found on the proximal and distal fiber end surfaces, negatively impacting power transmission and beam quality, respectively. Important parameters in the generation of the surface structures are power density, surface roughness and polarization direction. A fiber-coupled high-power 405 nm diode laser system with a high long-term stability will be introduced and described
- …