15 research outputs found
Full-Diversity QO-STBC Technique for Large-Antenna MIMO Systems
YesThe need to achieve high data rates in modern telecommunication systems, such as 5G standard, motivates the study and development of large antenna and multiple-input multiple-output (MIMO) systems. This study introduces a large antenna-order design of MIMO quasi-orthogonal space-time block code (QO-STBC) system that achieves better signal-to-noise ratio (SNR) and bit-error ratio (BER) performances than the conventional QO-STBCs with the potential for massive MIMO (mMIMO) configurations. Although some earlier MIMO standards were built on orthogonal space-time block codes (O-STBCs), which are limited to two transmit antennas and data rates, the need for higher data rates motivates the exploration of higher antenna configurations using different QO-STBC schemes. The standard QO-STBC offers a higher number of antennas than the O-STBC with the full spatial rate. Unfortunately, also, the standard QO-STBCs are not able to achieve full diversity due to self-interference within their detection matrices; this diminishes the BER performance of the QO-STBC scheme. The detection also involves nonlinear processing, which further complicates the system. To solve these problems, we propose a linear processing design technique (which eliminates the system complexity) for constructing interference-free QO-STBCs and that also achieves full diversity using Hadamard modal matrices with the potential for mMIMO design. Since the modal matrices that orthogonalize QO-STBC are not sparse, our proposal also supports O-STBCs with a well-behaved peak-to-average power ratio (PAPR) and better BER. The results of the proposed QO-STBC outperform other full diversity techniques including Givens-rotation and the eigenvalue decomposition (EVD) techniques by 15 dB for both MIMO and multiple-input single-output (MISO) antenna configurations at 10â3 BER. The proposed interference-free QO-STBC is also implemented for 16ĂNR and 32ĂNR MIMO systems, where NRâ¤2. We demonstrate 8 x 16 and 32 transmit antenna-enabled MIMO systems with the potential for mMIMO design applications with attractive BER and PAPR performance characteristics
Generalized MGF of Beckmann Fading with Applications to Wireless Communications Performance Analysis
The Beckmann distribution is a general multipath fading model for the received radio signal in the presence of a large number of scatterers, which can thence be modeled as a complex Gaussian random variable where both the in-phase and quadrature components have arbitrary mean and variance. However, the complicated nature of this distribution has prevented its widespread use and relatively few analytical results have been reported for this otherwise useful fading model. In this paper, we derive a closed-form expression for the generalized moment-generating function (MGF) of the signal-to-noise ratio (SNR) of Beckmann fading, which permits to circumvent the inherent analytical complexity of this model. This is a new and useful result, as it is key for evaluating several important performance metrics of different wireless communication systems and also permits to readily compute the moments of the output SNR. Thus, we obtain simple exact expressions for the energy detection performance in Beckmann fading channels, both in terms of the receiver operating characteristic (ROC) curve and of the area under ROC curve. We also analyze the outage probability in interference limited systems affected by Beckmann fading, as well as the outage probability of secrecy capacity in wiretap Beckmann fading channels. Monte Carlo simulations have been performed to validate the derived expressions.Universidad de MĂĄlaga. Campus de Excelencia Internacional. AndalucĂa Tech
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: ⢠Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments⢠Measurements, characterization, and modelling of radio channels beyond 4G networks⢠Key issues in Vehicle (V2X) communication⢠Wireless Body Area Networks, including specific Radio Channel Models for WBANs⢠Energy efficiency and resource management enhancements in Radio Access Networks⢠Definitions and models for the virtualised and cloud RAN architectures⢠Advances on feasible indoor localization and tracking techniques⢠Recent findings and innovations in antenna systems for communications⢠Physical Layer Network Coding for next generation wireless systems⢠Methods and techniques for MIMO Over the Air (OTA) testin
Radio Communications
In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modiďŹed our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the ďŹeld of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks
Communications protocols for wireless sensor networks in perturbed environment
This thesis is mainly in the Smart Grid (SG) domain. SGs improve the safety of electrical networks and allow a more adapted use of electricity storage, available in a limited way. SGs also increase overall energy efficiency by reducing peak consumption. The use of this technology is the most appropriate solution because it allows more efficient energy management. In this context, manufacturers such as Hydro-Quebec deploy sensor networks in the nerve centers to control major equipment. To reduce deployment costs and cabling complexity, the option of a wireless sensor network seems the most obvious solution. However, deploying a sensor network requires in-depth knowledge of the environment. High voltages substations are strategic points in the power grid and generate impulse noise that can degrade the performance of wireless communications. The works in this thesis are focused on the development of high performance communication protocols for the profoundly disturbed environments. For this purpose, we have proposed an approach based on the concatenation of rank metric and convolutional coding with orthogonal frequency division multiplexing. This technique is very efficient in reducing the bursty nature of impulsive noise while having a quite low level of complexity. Another solution based on a multi-antenna system is also designed. We have proposed a cooperative closed-loop coded MIMO system based on rank metric code and maxâdmin precoder. The second technique is also an optimal solution for both improving the reliability of the system and energy saving in wireless sensor networks
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: ⢠Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments⢠Measurements, characterization, and modelling of radio channels beyond 4G networks⢠Key issues in Vehicle (V2X) communication⢠Wireless Body Area Networks, including specific Radio Channel Models for WBANs⢠Energy efficiency and resource management enhancements in Radio Access Networks⢠Definitions and models for the virtualised and cloud RAN architectures⢠Advances on feasible indoor localization and tracking techniques⢠Recent findings and innovations in antenna systems for communications⢠Physical Layer Network Coding for next generation wireless systems⢠Methods and techniques for MIMO Over the Air (OTA) testin
Recommended from our members
Adaptive Coded Modulation Classification and Spectrum Sensing for Cognitive Radio Systems. Adaptive Coded Modulation Techniques for Cognitive Radio Using Kalman Filter and Interacting Multiple Model Methods
The current and future trends of modern wireless communication systems place heavy demands on fast data transmissions in order to satisfy end usersâ requirements anytime, anywhere. Such demands are obvious in recent applications such as smart phones, long term evolution (LTE), 4 & 5 Generations (4G & 5G), and worldwide interoperability for microwave access (WiMAX) platforms, where robust coding and modulations are essential especially in streaming on-line video material, social media and gaming. This eventually resulted in extreme exhaustion imposed on the frequency spectrum as a rare natural resource due to stagnation in current spectrum management policies. Since its advent in the late 1990s, cognitive radio (CR) has been conceived as an enabling technology aiming at the efficient utilisation of frequency spectrum that can lead to potential direct spectrum access (DSA) management. This is mainly attributed to its internal capabilities inherited from the concept of software defined radio (SDR) to sniff its surroundings, learn and adapt its operational parameters accordingly. CR systems (CRs) may commonly comprise one or all of the following core engines that characterise their architectures; namely, adaptive coded modulation (ACM), automatic modulation classification (AMC) and spectrum sensing (SS).
Motivated by the above challenges, this programme of research is primarily aimed at the design and development of new paradigms to help improve the adaptability of CRs and thereby achieve the desirable signal processing tasks at the physical layer of the above core engines. Approximate modelling of Rayleigh and finite state Markov channels (FSMC) with a new concept borrowed from econometric studies have been approached. Then insightful channel estimation by using Kalman filter (KF) augmented with interacting multiple model (IMM) has been examined for the purpose of robust adaptability, which is applied for the first time in wireless communication systems. Such new IMM-KF combination has been facilitated in the feedback channel between wireless transmitter and receiver to adjust the transmitted power, by using a water-filling (WF) technique, and constellation pattern and rate in the ACM algorithm. The AMC has also benefited from such IMM-KF integration to boost the performance against conventional parametric estimation methods such as maximum likelihood estimate (MLE) for channel interrogation and the estimated parameters of both inserted into the ML classification algorithm. Expectation-maximisation (EM) has been applied to examine unknown transmitted modulation sequences and channel parameters in tandem. Finally, the non-parametric multitaper method (MTM) has been thoroughly examined for spectrum estimation (SE) and SS, by relying on Neyman-Pearson (NP) detection principle for hypothesis test, to allow licensed primary users (PUs) to coexist with opportunistic unlicensed secondary users (SUs) in the same frequency bands of interest without harmful effects. The performance of the above newly suggested paradigms have been simulated and assessed under various transmission settings and revealed substantial improvements
Performance Analysis of Cognitive Radio Systems with Imperfect Channel Knowledge
An analytical framework is established to characterize the effects such as time allocation and variation, arising due to the incorporation of imperfect channel knowledge, that are detrimental to the performance of the cognitive radio systems. In order to facilitate hardware deployment of a cognitive radio system, received power-based estimation, a novel channel estimation technique is employed for the channels existing between the primary and the secondary systems, thus fulfilling low-complexity and versatility requirements
D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies
This document provides the most recent updates on the technical contributions and research
challenges focused in WP3. Each Technology Component (TeC) has been evaluated
under possible uniform assessment framework of WP3 which is based on the simulation guidelines
of WP6. The performance assessment is supported by the simulation results which are in their
mature and stable state. An update on the Most Promising Technology Approaches (MPTAs)
and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission
technologies in 5G systems has also been provided. This consolidated view is further
supported in this document by the presentation of the impact of MPTAs on METIS scenarios
and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675