Spectrally Compatible Iterative Water Filling

Until now static spectrum management has ensured that DSL lines in the same cable are spectrally compatible under worst-case crosstalk conditions. Recently dynamic spectrum management (DSM) has been proposed aiming at an increased capacity utilization by adaptation of the transmit spectra of DSL lines to the actual crosstalk interference. In this paper, a new DSM method for downstream ADSL is derived from the well-known iterative water-filling (IWF) algorithm. The amount of boosting of this new DSM method is limited, such that it is spectrally compatible with ADSL. Hence it is referred to as spectrally compatible iterative water filling (SC-IWF). This paper focuses on the performance gains of SC-IWF. This method is an autonomous DSM method (DSM level 1) and it will be investigated together with two other DSM level-1 algorithms, under various noise conditions, namely, iterative water-filling algorithm, and flat power back-off (flat PBO)

Fractional step like schemes for free surface problems with thermal coupling using the Lagrangian PFEM

The method presented in Aubry et al. (Comput Struc 83:1459–1475, 2005) for the solution of an incompressible viscous fluid flow with heat transfer using a fully Lagrangian description of motion is extended to three dimensions (3D) with particular emphasis on mass conservation. A modified fractional step (FS) based on the pressure Schur complement (Turek 1999), and related to the class of algebraic splittings Quarteroni et al. (Comput Methods Appl Mech Eng 188:505–526, 2000), is used and a new advantage of the splittings of the equations compared with the classical FS is highlighted for free surface problems. The temperature is semi-coupled with the displacement, which is the main variable in a Lagrangian description. Comparisons for various mesh Reynolds numbers are performed with the classical FS, an algebraic splitting and a monolithic solution, in order to illustrate the behaviour of the Uzawa operator and the mass conservation. As the classical fractional step is equivalent to one iteration of the Uzawa algorithm performed with a standard Laplacian as a preconditioner, it will behave well only in a Reynold mesh number domain where the preconditioner is efficient. Numerical results are provided to assess the superiority of the modified algebraic splitting to the classical FS

Performance Comparison of Single-Sideband Direct Detection Nyquist-Subcarrier Modulation and OFDM

Direct detection transceivers offer advantages, including low cost and complexity, in short- and medium-haul links. We carried out studies seeking to identify the signal formats which offer the highest information spectral densities and maximum transmission distances for direct detection links. The performance of two spectrally efficient optical signal formats, single-sideband (SSB) Nyquist pulse-shaped subcarrier modulation (SCM) and SSB orthogonal frequency-division multiplexing (OFDM), are compared by means of simulations. The comparison is performed for a range of wavelength-division multiplexing (WDM) net information spectral densities up to 2.0 b/s/Hz by varying the signal bandwidth, modulation cardinality, and WDM channel spacing. The signal formats' tolerance to signal-signal beating interference, resulting from square-law detection, is investigated, and the Nyquist-SCM format is found to suffer lower penalties from this nonlinearity at high information spectral densities. In 7 × 28 Gb/s WDM transmission at 2.0 b/s/Hz (with electronic predistortion and EDFA-only amplification), Nyquist-SCM signals can be transmitted over distances of up to 720 km of standard SMF in comparison to a maximum of 320 km with the OFDM signal format

Submillimetre line spectrum of the Seyfert galaxy NGC1068 from the Herschel-SPIRE Fourier Transform Spectrometer

The first complete submillimetre spectrum (190-670um) of the Seyfert 2 galaxy NGC1068 has been observed with the SPIRE Fourier Transform Spectrometer onboard the {\it Herschel} Space Observatory. The sequence of CO lines (Jup=4-13), lines from water, the fundamental rotational transition of HF, two o-H_2O+ lines and one line each from CH+ and OH+ have been detected, together with the two [CI] lines and the [NII]205um line. The observations in both single pointing mode with sparse image sampling and in mapping mode with full image sampling allow us to disentangle two molecular emission components, one due to the compact circum-nuclear disk (CND) and one from the extended region encompassing the star forming ring (SF-ring). Radiative transfer models show that the two CO components are characterized by density of n(H_2)=10^4.5 and 10^2.9 cm^-3 and temperature of T=100K and 127K, respectively. The comparison of the CO line intensities with photodissociation region (PDR) and X-ray dominated region (XDR) models, together with other observational constraints, such as the observed CO surface brightness and the radiation field, indicate that the best explanation for the CO excitation of the CND is an XDR with density of n(H_2) 10^4 cm^-3 and X-ray flux of 9 erg s^-1 cm^-2, consistent with illumination by the active galactic nucleus, while the CO lines in the SF-ring are better modeled by a PDR. The detected water transitions, together with those observed with the \her \sim PACS Spectrometer, can be modeled by an LVG model with low temperature (T_kin \sim 40K) and high density (n(H_2) in the range 10^6.7-10^7.9 cm^-3).Comment: Accepted for publication on the Astrophysical Journal, 30 August 201

Incompressible Lagrangian fluid flow with thermal coupling

In this monograph is presented a method for the solution of an incompressible viscous fluid flow with heat transfer and solidification usin a fully Lagrangian description on the motion. The originality of this method consists in assembling various concepts and techniques which appear naturally due to the Lagrangian formulation.Postprint (published version

Seismotectonic, structural, volcanologic, and geomorphic study of New Zealand; indigenous forest assessment in New Zealand; mapping, land use, and environmental studies in New Zealand, volume 1

The author has identified the following significant results. Results of the atmospheric extinction measurements show clearly the greater opacity of the atmosphere in MSS band 4 which is due to Rayleigh scattering. Atmospheric water vapor absorbs strongly in a wide region between 900 nm and 1000 nm, and this results in a consistently higher extinction coefficient than would otherwise be expected in MSS band 7. The short term fluctuations tend to be greater in band 7 than in the other bands, and this effect is probably due to variations of water vapor concentration in the instrument line of sight. These high extinction coefficients and short term fluctuations in band 7 were observed at Menindee which is in a semi-desert region in western New South Wales

Acquisition strategies for fat/water separated MRI

This thesis focuses on new ways to more efficiently acquire the signal for fat/water separated MRI, also known as Dixon methods. In paper I, the concept of dual bandwidths was introduced to improve SNR efficiency by removing dead times in a spin echo PROPELLER sequence. By correcting for the displacement of fat, we were able to improve the motion correction. This required additional considerations during reconstruction in order to avoid noise amplification, which was solved with a noise-whitening Tikhonov regularization. Paper II explores the combination of fat/water separation in k-space with partially acquired data, i.e. partial Fourier sampling. With reduced sampling coverage comes the ability of increased spatial resolution, which is often limited in fat/water imaging, particularly in gradient echo sequences. A modified POCS routine was also developed with real-valued estimates, exploiting Hermitian symmetry to improve the inverse problem conditioning in the fully sampled region. A single-TR dual-bandwidth RARE (fast/turbo spin echo) sequence without dead times was developed in Paper III, which uses partial Fourier sampling with late and early echoes to improve the chemical shift encoding. The proposed sequence can acquire images with 0.5 mm in-plane resolution without dead times, with image quality exceeding current state-of-the-art techniques. An automated selection of gradient waveforms based on Cramér-Rao bounds was implemented on the scanner. In Paper IV, the dual-bandwidth concept was generalized to continuous bandwidths. Instead of the conventional shift of a trapezoidal readout gradient, we describe a new method of encoding chemical shift by using asymmetric readout waveforms. Asymmetric readouts were implemented in a RARE sequence to completely remove dead times from multi-TR acquisitions, with typical scan time reductions of 25 %. The developed methods enable fat/water imaging with reduced scan times and increased spatial resolution, which has previously limited their use