A Data-driven Methodology Towards Mobility- and Traffic-related Big Spatiotemporal Data Frameworks

Human population is increasing at unprecedented rates, particularly in urban areas. This increase, along with the rise of a more economically empowered middle class, brings new and complex challenges to the mobility of people within urban areas. To tackle such challenges, transportation and mobility authorities and operators are trying to adopt innovative Big Data-driven Mobility- and Traffic-related solutions. Such solutions will help decision-making processes that aim to ease the load on an already overloaded transport infrastructure. The information collected from day-to-day mobility and traffic can help to mitigate some of such mobility challenges in urban areas. Road infrastructure and traffic management operators (RITMOs) face several limitations to effectively extract value from the exponentially growing volumes of mobility- and traffic-related Big Spatiotemporal Data (MobiTrafficBD) that are being acquired and gathered. Research about the topics of Big Data, Spatiotemporal Data and specially MobiTrafficBD is scattered, and existing literature does not offer a concrete, common methodological approach to setup, configure, deploy and use a complete Big Data-based framework to manage the lifecycle of mobility-related spatiotemporal data, mainly focused on geo-referenced time series (GRTS) and spatiotemporal events (ST Events), extract value from it and support decision-making processes of RITMOs. This doctoral thesis proposes a data-driven, prescriptive methodological approach towards the design, development and deployment of MobiTrafficBD Frameworks focused on GRTS and ST Events. Besides a thorough literature review on Spatiotemporal Data, Big Data and the merging of these two fields through MobiTraffiBD, the methodological approach comprises a set of general characteristics, technical requirements, logical components, data flows and technological infrastructure models, as well as guidelines and best practices that aim to guide researchers, practitioners and stakeholders, such as RITMOs, throughout the design, development and deployment phases of any MobiTrafficBD Framework. This work is intended to be a supporting methodological guide, based on widely used Reference Architectures and guidelines for Big Data, but enriched with inherent characteristics and concerns brought about by Big Spatiotemporal Data, such as in the case of GRTS and ST Events. The proposed methodology was evaluated and demonstrated in various real-world use cases that deployed MobiTrafficBD-based Data Management, Processing, Analytics and Visualisation methods, tools and technologies, under the umbrella of several research projects funded by the European Commission and the Portuguese Government.A população humana cresce a um ritmo sem precedentes, particularmente nas áreas urbanas. Este aumento, aliado ao robustecimento de uma classe média com maior poder económico, introduzem novos e complexos desafios na mobilidade de pessoas em áreas urbanas. Para abordar estes desafios, autoridades e operadores de transportes e mobilidade estão a adotar soluções inovadoras no domínio dos sistemas de Dados em Larga Escala nos domínios da Mobilidade e Tráfego. Estas soluções irão apoiar os processos de decisão com o intuito de libertar uma infraestrutura de estradas e transportes já sobrecarregada. A informação colecionada da mobilidade diária e da utilização da infraestrutura de estradas pode ajudar na mitigação de alguns dos desafios da mobilidade urbana. Os operadores de gestão de trânsito e de infraestruturas de estradas (em inglês, road infrastructure and traffic management operators — RITMOs) estão limitados no que toca a extrair valor de um sempre crescente volume de Dados Espaciotemporais em Larga Escala no domínio da Mobilidade e Tráfego (em inglês, Mobility- and Traffic-related Big Spatiotemporal Data —MobiTrafficBD) que estão a ser colecionados e recolhidos. Os trabalhos de investigação sobre os tópicos de Big Data, Dados Espaciotemporais e, especialmente, de MobiTrafficBD, estão dispersos, e a literatura existente não oferece uma metodologia comum e concreta para preparar, configurar, implementar e usar uma plataforma (framework) baseada em tecnologias Big Data para gerir o ciclo de vida de dados espaciotemporais em larga escala, com ênfase nas série temporais georreferenciadas (em inglês, geo-referenced time series — GRTS) e eventos espacio- temporais (em inglês, spatiotemporal events — ST Events), extrair valor destes dados e apoiar os RITMOs nos seus processos de decisão. Esta dissertação doutoral propõe uma metodologia prescritiva orientada a dados, para o design, desenvolvimento e implementação de plataformas de MobiTrafficBD, focadas em GRTS e ST Events. Além de uma revisão de literatura completa nas áreas de Dados Espaciotemporais, Big Data e na junção destas áreas através do conceito de MobiTrafficBD, a metodologia proposta contem um conjunto de características gerais, requisitos técnicos, componentes lógicos, fluxos de dados e modelos de infraestrutura tecnológica, bem como diretrizes e boas práticas para investigadores, profissionais e outras partes interessadas, como RITMOs, com o objetivo de guiá-los pelas fases de design, desenvolvimento e implementação de qualquer pla- taforma MobiTrafficBD. Este trabalho deve ser visto como um guia metodológico de suporte, baseado em Arqui- teturas de Referência e diretrizes amplamente utilizadas, mas enriquecido com as característi- cas e assuntos implícitos relacionados com Dados Espaciotemporais em Larga Escala, como no caso de GRTS e ST Events. A metodologia proposta foi avaliada e demonstrada em vários cenários reais no âmbito de projetos de investigação financiados pela Comissão Europeia e pelo Governo português, nos quais foram implementados métodos, ferramentas e tecnologias nas áreas de Gestão de Dados, Processamento de Dados e Ciência e Visualização de Dados em plataformas MobiTrafficB

Multimodal Content Delivery for Geo-services

This thesis describes a body of work carried out over several research projects in the area of multimodal interaction for location-based services. Research in this area has progressed from using simulated mobile environments to demonstrate the visual modality, to the ubiquitous delivery of rich media using multimodal interfaces (geo- services). To effectively deliver these services, research focused on innovative solutions to real-world problems in a number of disciplines including geo-location, mobile spatial interaction, location-based services, rich media interfaces and auditory user interfaces. My original contributions to knowledge are made in the areas of multimodal interaction underpinned by advances in geo-location technology and supported by the proliferation of mobile device technology into modern life. Accurate positioning is a known problem for location-based services, contributions in the area of mobile positioning demonstrate a hybrid positioning technology for mobile devices that uses terrestrial beacons to trilaterate position. Information overload is an active concern for location-based applications that struggle to manage large amounts of data, contributions in the area of egocentric visibility that filter data based on field-of-view demonstrate novel forms of multimodal input. One of the more pertinent characteristics of these applications is the delivery or output modality employed (auditory, visual or tactile). Further contributions in the area of multimodal content delivery are made, where multiple modalities are used to deliver information using graphical user interfaces, tactile interfaces and more notably auditory user interfaces. It is demonstrated how a combination of these interfaces can be used to synergistically deliver context sensitive rich media to users - in a responsive way - based on usage scenarios that consider the affordance of the device, the geographical position and bearing of the device and also the location of the device

Buffer Region: Reifying Buffer Analysis for GIS Professionals

Geographic Information System (GIS) is widely used by professional map makers for supporting tasks such as decision-making process. However, GIS has been considered as hard to use and not user-friendly and remains unchanged for decades. In my thesis, I am aiming to find out design solutions that help GIS professionals in using GIS. I interviewed 13 professional map makers to understand tasks performed by professional users and problems they have. I found out three problems professional users have with GIS: Lack of support for exploration, hard to learn and use for early career professionals, and lack of support for customizing visualization; two strategy they used: visualizing data for understanding and getting feedback, and overlapping for analysis; and two patterns across their use of tools: they use distance as core criteria and their object of interest switch between layer and elements within layer. Based on my interview result, I iterated my design with three prototypes: mask focusing on reifying methods applied to layers to reduce repeated work and support exploration, bubble focusing on reusing the parameters to reduce repeated works, and finally buffer region reify the process of creating buffer area with direct manipulation, for supporting early career users and user task of exploration

Video big data: an agile architecture for systematic exploration and analytics

Video is currently at the forefront of most business and natural environments. In surveillance, it is the most important technology as surveillance systems reveal information and patterns for solving many security problems including crime prevention. This research investigates technologies that currently drive video surveillance systems with a view to optimization and automated decision support. The investigation reveals some features and properties that can be optimised to improve performance and derive further benefits from surveillance systems. These aspects include system-wide architecture, meta-data generation, meta-data persistence, object identification, object tagging, object tracking, search and querying sub-systems. The current less-than-optimum performance is attributable to many factors, which include massive volume, variety, and velocity (the speed at which streaming video transmit to storage) of video data in surveillance systems. Research contributions are 2-fold. First, we propose a system-wide architecture for designing and implementing surveillance systems, based on the authors’ system architecture for generating meta-data. Secondly, we design a simulation model of a multi-view surveillance system from which the researchers generate simulated video streams in large volumes. From each video sequence in the model, the authors extract meta-data and apply a novel algorithm for predicting the location of identifiable objects across a well-connected camera cluster. This research provide evidence that independent surveillance systems (for example, security cameras) can be unified across a geographical location such as a smart city, where each network is administratively owned and managed independently. Our investigation involved 2 experiments - first, the implementation of a web-based solution where we developed a directory service for managing, cataloguing, and persisting metadata generated by the surveillance networks. The second experiment focused on the set up, configuration and the architecture of the surveillance system. These experiments involved the investigation and demonstration of 3 loosely coupled service-oriented APIs – these services provided the capability to generate the query-able metadata. The results of our investigations provided answers to our research questions - the main question being “to what degree of accuracy can we predict the location of an object in a connected surveillance network”. Our experiment also provided evidence in support of our hypothesis – “it is feasible to ‘explore’ unified surveillance data generated from independent surveillance networks”

NEW METHODS FOR MINING SEQUENTIAL AND TIME SERIES DATA

Data mining is the process of extracting knowledge from large amounts of data. It covers a variety of techniques aimed at discovering diverse types of patterns on the basis of the requirements of the domain. These techniques include association rules mining, classification, cluster analysis and outlier detection. The availability of applications that produce massive amounts of spatial, spatio-temporal (ST) and time series data (TSD) is the rationale for developing specialized techniques to excavate such data. In spatial data mining, the spatial co-location rule problem is different from the association rule problem, since there is no natural notion of transactions in spatial datasets that are embedded in continuous geographic space. Therefore, we have proposed an efficient algorithm (GridClique) to mine interesting spatial co-location patterns (maximal cliques). These patterns are used as the raw transactions for an association rule mining technique to discover complex co-location rules. Our proposal includes certain types of complex relationships – especially negative relationships – in the patterns. The relationships can be obtained from only the maximal clique patterns, which have never been used until now. Our approach is applied on a well-known astronomy dataset obtained from the Sloan Digital Sky Survey (SDSS). ST data is continuously collected and made accessible in the public domain. We present an approach to mine and query large ST data with the aim of finding interesting patterns and understanding the underlying process of data generation. An important class of queries is based on the flock pattern. A flock is a large subset of objects moving along paths close to each other for a predefined time. One approach to processing a “flock query” is to map ST data into high-dimensional space and to reduce the query to a sequence of standard range queries that can be answered using a spatial indexing structure; however, the performance of spatial indexing structures rapidly deteriorates in high-dimensional space. This thesis sets out a preprocessing strategy that uses a random projection to reduce the dimensionality of the transformed space. We use probabilistic arguments to prove the accuracy of the projection and to present experimental results that show the possibility of managing the curse of dimensionality in a ST setting by combining random projections with traditional data structures. In time series data mining, we devised a new space-efficient algorithm (SparseDTW) to compute the dynamic time warping (DTW) distance between two time series, which always yields the optimal result. This is in contrast to other approaches which typically sacrifice optimality to attain space efficiency. The main idea behind our approach is to dynamically exploit the existence of similarity and/or correlation between the time series: the more the similarity between the time series, the less space required to compute the DTW between them. Other techniques for speeding up DTW, impose a priori constraints and do not exploit similarity characteristics that may be present in the data. Our experiments demonstrate that SparseDTW outperforms these approaches. We discover an interesting pattern by applying SparseDTW algorithm: “pairs trading” in a large stock-market dataset, of the index daily prices from the Australian stock exchange (ASX) from 1980 to 2002

Knowledge-based and data-driven approaches for geographical information access

Geographical Information Access (GeoIA) can be defined as a way of retrieving information from textual collections that includes the automatic analysis and interpretation of the geographical constraints and terms present in queries and documents. This PhD thesis presents, describes and evaluates several heterogeneous approaches for the following three GeoIA tasks: Geographical Information Retrieval (GIR), Geographical Question Answering (GeoQA), and Textual Georeferencing (TG). The GIR task deals with user queries that search over documents (e.g. ¿vineyards in California?) and the GeoQA task treats questions that retrieve answers (e.g. ¿What is the capital of France?). On the other hand, TG is the task of associate one or more georeferences (such as polygons or coordinates in a geodetic reference system) to electronic documents. Current state-of-the-art AI algorithms are not yet fully understanding the semantic meaning and the geographical constraints and terms present in queries and document collections. This thesis attempts to improve the effectiveness results of GeoIA tasks by: 1) improving the detection, understanding, and use of a part of the geographical and the thematic content of queries and documents with Toponym Recognition, Toponym Disambiguation and Natural Language Processing (NLP) techniques, and 2) combining Geographical Knowledge-Based Heuristics based on common sense with Data-Driven IR algorithms. The main contributions of this thesis to the state-of-the-art of GeoIA tasks are: 1) The presentation of 10 novel approaches for GeoIA tasks: 3 approaches for GIR, 3 for GeoQA, and 4 for Textual Georeferencing (TG). 2) The evaluation of these novel approaches in these contexts: within official evaluation benchmarks, after evaluation benchmarks with the test collections, and with other specific datasets. Most of these algorithms have been evaluated in international evaluations and some of them achieved top-ranked state-of-the-art results, including top-performing results in GIR (GeoCLEF 2007) and TG (MediaEval 2014) benchmarks. 3) The experiments reported in this PhD thesis show that the approaches can combine effectively Geographical Knowledge and NLP with Data-Driven techniques to improve the efectiveness measures of the three Geographical Information Access tasks investigated. 4) TALPGeoIR: a novel GIR approach that combines Geographical Knowledge ReRanking (GeoKR), NLP and Relevance Feedback (RF) that achieved state-of-the-art results in official GeoCLEF benchmarks (Ferrés and Rodríguez, 2008; Mandl et al., 2008) and posterior experiments (Ferrés and Rodríguez, 2015a). This approach has been evaluated with the full GeoCLEF corpus (100 topics) and showed that GeoKR, NLP, and RF techniques evaluated separately or in combination improve the results in MAP and R-Precision effectiveness measures of the state-of-the-art IR algorithms TF-IDF, BM25 and InL2 and show statistical significance in most of the experiments. 5) GeoTALP-QA: a scope-based GeoQA approach for Spanish and English and its evaluation with a set of questions of the Spanish geography (Ferrés and Rodríguez, 2006). 6) Four state-of-the-art Textual Georeferencing approaches for informal and formal documents that achieved state-of-the-art results in evaluation benchmarks (Ferrés and Rodríguez, 2014) and posterior experiments (Ferrés and Rodríguez, 2011; Ferrés and Rodríguez, 2015b).L'Accés a la Informació Geogràfica (GeoAI) pot ser definit com una forma de recuperar informació de col·lecions textuals que inclou l'anàlisi automàtic i la interpretació dels termes i restriccions geogràfiques que apareixen en consultes i documents. Aquesta tesi doctoral presenta, descriu i avalua varies aproximacions heterogènies a les seguents tasques de GeoAI: Recuperació de la Informació Geogràfica (RIG), Cerca de la Resposta Geogràfica (GeoCR), i Georeferenciament Textual (GT). La tasca de RIG tracta amb consultes d'usuari que cerquen documents (e.g. ¿vinyes a California?) i la tasca GeoCR tracta de recuperar respostes concretes a preguntes (e.g. ¿Quina és la capital de França?). D'altra banda, GT es la tasca de relacionar una o més referències geogràfiques (com polígons o coordenades en un sistema de referència geodètic) a documents electrònics. Els algoritmes de l'estat de l'art actual en Intel·ligència Artificial encara no comprenen completament el significat semàntic i els termes i les restriccions geogràfiques presents en consultes i col·leccions de documents. Aquesta tesi intenta millorar els resultats en efectivitat de les tasques de GeoAI de la seguent manera: 1) millorant la detecció, comprensió, i la utilització d'una part del contingut geogràfic i temàtic de les consultes i documents amb tècniques de reconeixement de topònims, desambiguació de topònims, i Processament del Llenguatge Natural (PLN), i 2) combinant heurístics basats en Coneixement Geogràfic i en el sentit comú humà amb algoritmes de Recuperació de la Informació basats en dades. Les principals contribucions d'aquesta tesi a l'estat de l'art de les tasques de GeoAI són: 1) La presentació de 10 noves aproximacions a les tasques de GeoAI: 3 aproximacions per RIG, 3 per GeoCR, i 4 per Georeferenciament Textual (GT). 2) L'avaluació d'aquestes noves aproximacions en aquests contexts: en el marc d'avaluacions comparatives internacionals, posteriorment a avaluacions comparatives internacionals amb les col·lections de test, i amb altres conjunts de dades específics. La majoria d'aquests algoritmes han estat avaluats en avaluacions comparatives internacionals i alguns d'ells aconseguiren alguns dels millors resultats en l'estat de l'art, com per exemple els resultats en comparatives de RIG (GeoCLEF 2007) i GT (MediaEval 2014). 3) Els experiments descrits en aquesta tesi mostren que les aproximacions poden combinar coneixement geogràfic i PLN amb tècniques basades en dades per millorar les mesures d'efectivitat en les tres tasques de l'Accés a la Informació Geogràfica investigades. 4) TALPGeoIR: una nova aproximació a la RIG que combina Re-Ranking amb Coneixement Geogràfic (GeoKR), PLN i Retroalimentació de Rellevancia (RR) que aconseguí resultats en l'estat de l'art en comparatives oficials GeoCLEF (Ferrés and Rodríguez, 2008; Mandl et al., 2008) i en experiments posteriors (Ferrés and Rodríguez, 2015a). Aquesta aproximació ha estat avaluada amb el conjunt complert del corpus GeoCLEF (100 topics) i ha mostrat que les tècniques GeoKR, PLN i RR avaluades separadament o en combinació milloren els resultats en les mesures efectivitat MAP i R-Precision dels algoritmes de l'estat de l'art en Recuperació de la Infomació TF-IDF, BM25 i InL2 i a més mostren significació estadística en la majoria dels experiments. 5) GeoTALP-QA: una aproximació basada en l'àmbit geogràfic per espanyol i anglès i la seva avaluació amb un conjunt de preguntes de la geografía espanyola (Ferrés and Rodríguez, 2006). 6) Quatre aproximacions per al georeferenciament de documents formals i informals que obtingueren resultats en l'estat de l'art en avaluacions comparatives (Ferrés and Rodríguez, 2014) i en experiments posteriors (Ferrés and Rodríguez, 2011; Ferrés and Rodríguez, 2015b)

Knowledge-based and data-driven approaches for geographical information access

Geographical Information Access (GeoIA) can be defined as a way of retrieving information from textual collections that includes the automatic analysis and interpretation of the geographical constraints and terms present in queries and documents. This PhD thesis presents, describes and evaluates several heterogeneous approaches for the following three GeoIA tasks: Geographical Information Retrieval (GIR), Geographical Question Answering (GeoQA), and Textual Georeferencing (TG). The GIR task deals with user queries that search over documents (e.g. ¿vineyards in California?) and the GeoQA task treats questions that retrieve answers (e.g. ¿What is the capital of France?). On the other hand, TG is the task of associate one or more georeferences (such as polygons or coordinates in a geodetic reference system) to electronic documents. Current state-of-the-art AI algorithms are not yet fully understanding the semantic meaning and the geographical constraints and terms present in queries and document collections. This thesis attempts to improve the effectiveness results of GeoIA tasks by: 1) improving the detection, understanding, and use of a part of the geographical and the thematic content of queries and documents with Toponym Recognition, Toponym Disambiguation and Natural Language Processing (NLP) techniques, and 2) combining Geographical Knowledge-Based Heuristics based on common sense with Data-Driven IR algorithms. The main contributions of this thesis to the state-of-the-art of GeoIA tasks are: 1) The presentation of 10 novel approaches for GeoIA tasks: 3 approaches for GIR, 3 for GeoQA, and 4 for Textual Georeferencing (TG). 2) The evaluation of these novel approaches in these contexts: within official evaluation benchmarks, after evaluation benchmarks with the test collections, and with other specific datasets. Most of these algorithms have been evaluated in international evaluations and some of them achieved top-ranked state-of-the-art results, including top-performing results in GIR (GeoCLEF 2007) and TG (MediaEval 2014) benchmarks. 3) The experiments reported in this PhD thesis show that the approaches can combine effectively Geographical Knowledge and NLP with Data-Driven techniques to improve the efectiveness measures of the three Geographical Information Access tasks investigated. 4) TALPGeoIR: a novel GIR approach that combines Geographical Knowledge ReRanking (GeoKR), NLP and Relevance Feedback (RF) that achieved state-of-the-art results in official GeoCLEF benchmarks (Ferrés and Rodríguez, 2008; Mandl et al., 2008) and posterior experiments (Ferrés and Rodríguez, 2015a). This approach has been evaluated with the full GeoCLEF corpus (100 topics) and showed that GeoKR, NLP, and RF techniques evaluated separately or in combination improve the results in MAP and R-Precision effectiveness measures of the state-of-the-art IR algorithms TF-IDF, BM25 and InL2 and show statistical significance in most of the experiments. 5) GeoTALP-QA: a scope-based GeoQA approach for Spanish and English and its evaluation with a set of questions of the Spanish geography (Ferrés and Rodríguez, 2006). 6) Four state-of-the-art Textual Georeferencing approaches for informal and formal documents that achieved state-of-the-art results in evaluation benchmarks (Ferrés and Rodríguez, 2014) and posterior experiments (Ferrés and Rodríguez, 2011; Ferrés and Rodríguez, 2015b).L'Accés a la Informació Geogràfica (GeoAI) pot ser definit com una forma de recuperar informació de col·lecions textuals que inclou l'anàlisi automàtic i la interpretació dels termes i restriccions geogràfiques que apareixen en consultes i documents. Aquesta tesi doctoral presenta, descriu i avalua varies aproximacions heterogènies a les seguents tasques de GeoAI: Recuperació de la Informació Geogràfica (RIG), Cerca de la Resposta Geogràfica (GeoCR), i Georeferenciament Textual (GT). La tasca de RIG tracta amb consultes d'usuari que cerquen documents (e.g. ¿vinyes a California?) i la tasca GeoCR tracta de recuperar respostes concretes a preguntes (e.g. ¿Quina és la capital de França?). D'altra banda, GT es la tasca de relacionar una o més referències geogràfiques (com polígons o coordenades en un sistema de referència geodètic) a documents electrònics. Els algoritmes de l'estat de l'art actual en Intel·ligència Artificial encara no comprenen completament el significat semàntic i els termes i les restriccions geogràfiques presents en consultes i col·leccions de documents. Aquesta tesi intenta millorar els resultats en efectivitat de les tasques de GeoAI de la seguent manera: 1) millorant la detecció, comprensió, i la utilització d'una part del contingut geogràfic i temàtic de les consultes i documents amb tècniques de reconeixement de topònims, desambiguació de topònims, i Processament del Llenguatge Natural (PLN), i 2) combinant heurístics basats en Coneixement Geogràfic i en el sentit comú humà amb algoritmes de Recuperació de la Informació basats en dades. Les principals contribucions d'aquesta tesi a l'estat de l'art de les tasques de GeoAI són: 1) La presentació de 10 noves aproximacions a les tasques de GeoAI: 3 aproximacions per RIG, 3 per GeoCR, i 4 per Georeferenciament Textual (GT). 2) L'avaluació d'aquestes noves aproximacions en aquests contexts: en el marc d'avaluacions comparatives internacionals, posteriorment a avaluacions comparatives internacionals amb les col·lections de test, i amb altres conjunts de dades específics. La majoria d'aquests algoritmes han estat avaluats en avaluacions comparatives internacionals i alguns d'ells aconseguiren alguns dels millors resultats en l'estat de l'art, com per exemple els resultats en comparatives de RIG (GeoCLEF 2007) i GT (MediaEval 2014). 3) Els experiments descrits en aquesta tesi mostren que les aproximacions poden combinar coneixement geogràfic i PLN amb tècniques basades en dades per millorar les mesures d'efectivitat en les tres tasques de l'Accés a la Informació Geogràfica investigades. 4) TALPGeoIR: una nova aproximació a la RIG que combina Re-Ranking amb Coneixement Geogràfic (GeoKR), PLN i Retroalimentació de Rellevancia (RR) que aconseguí resultats en l'estat de l'art en comparatives oficials GeoCLEF (Ferrés and Rodríguez, 2008; Mandl et al., 2008) i en experiments posteriors (Ferrés and Rodríguez, 2015a). Aquesta aproximació ha estat avaluada amb el conjunt complert del corpus GeoCLEF (100 topics) i ha mostrat que les tècniques GeoKR, PLN i RR avaluades separadament o en combinació milloren els resultats en les mesures efectivitat MAP i R-Precision dels algoritmes de l'estat de l'art en Recuperació de la Infomació TF-IDF, BM25 i InL2 i a més mostren significació estadística en la majoria dels experiments. 5) GeoTALP-QA: una aproximació basada en l'àmbit geogràfic per espanyol i anglès i la seva avaluació amb un conjunt de preguntes de la geografía espanyola (Ferrés and Rodríguez, 2006). 6) Quatre aproximacions per al georeferenciament de documents formals i informals que obtingueren resultats en l'estat de l'art en avaluacions comparatives (Ferrés and Rodríguez, 2014) i en experiments posteriors (Ferrés and Rodríguez, 2011; Ferrés and Rodríguez, 2015b).Postprint (published version

Mining photographic collections to enhance the precision and recall of search results using semantically controlled query expansion

Driven by a larger and more diverse user-base and datasets, modern Information Retrieval techniques are striving to become contextually-aware in order to provide users with a more satisfactory search experience. While text-only retrieval methods are significantly more accurate and faster to render results than purely visual retrieval methods, these latter provide a rich complementary medium which can be used to obtain relevant and different results from those obtained using text-only retrieval. Moreover, the visual retrieval methods can be used to learn the user’s context and preferences, in particular the user’s relevance feedback, and exploit them to narrow down the search to more accurate results. Despite the overall deficiency in precision of visual retrieval result, the top results are accurate enough to be used for query expansion, when expanded in a controlled manner. The method we propose overcomes the usual pitfalls of visual retrieval: 1. The hardware barrier giving rise to prohibitively slow systems. 2. Results dominated by noise. 3. A significant gap between the low-level features and the semantics of the query. In our thesis, the first barrier is overcome by employing a simple block-based visual features which outperforms a method based on MPEG-7 features specially at early precision (precision of the top results). For the second obstacle, lists from words semantically weighted according to their degree of relation to the original query or to relevance feedback from example images are formed. These lists provide filters through which the confidence in the candidate results is assessed for inclusion in the results. This allows for more reliable Pseudo-Relevance Feedback (PRF). This technique is then used to bridge the third barrier; the semantic gap. It consists of a second step query, re-querying the data set with an query expanded with weighted words obtained from the initial query, and semantically filtered (SF) without human intervention. We developed our PRF-SF method on the IAPR TC-12 benchmark dataset of 20,000 tourist images, obtaining promising results, and tested it on the different and much larger Belga benchmark dataset of approximately 500,000 news images originating from a different source. Our experiments confirmed the potential of the method in improving the overall Mean Average Precision, recall, as well as the level of diversity of the results measured using cluster recall

Casual Information Visualization on Exploring Spatiotemporal Data

The goal of this thesis is to study how the diverse data on the Web which are familiar to everyone can be visualized, and with a special consideration on their spatial and temporal information. We introduce novel approaches and visualization techniques dealing with different types of data contents: interactively browsing large amount of tags linking with geospace and time, navigating and locating spatiotemporal photos or videos in collections, and especially, providing visual supports for the exploration of diverse Web contents on arbitrary webpages in terms of augmented Web browsing