1,888 research outputs found
Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition
The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future
Distributed and adaptive location identification system for mobile devices
Indoor location identification and navigation need to be as simple, seamless,
and ubiquitous as its outdoor GPS-based counterpart is. It would be of great
convenience to the mobile user to be able to continue navigating seamlessly as
he or she moves from a GPS-clear outdoor environment into an indoor environment
or a GPS-obstructed outdoor environment such as a tunnel or forest. Existing
infrastructure-based indoor localization systems lack such capability, on top
of potentially facing several critical technical challenges such as increased
cost of installation, centralization, lack of reliability, poor localization
accuracy, poor adaptation to the dynamics of the surrounding environment,
latency, system-level and computational complexities, repetitive
labor-intensive parameter tuning, and user privacy. To this end, this paper
presents a novel mechanism with the potential to overcome most (if not all) of
the abovementioned challenges. The proposed mechanism is simple, distributed,
adaptive, collaborative, and cost-effective. Based on the proposed algorithm, a
mobile blind device can potentially utilize, as GPS-like reference nodes,
either in-range location-aware compatible mobile devices or preinstalled
low-cost infrastructure-less location-aware beacon nodes. The proposed approach
is model-based and calibration-free that uses the received signal strength to
periodically and collaboratively measure and update the radio frequency
characteristics of the operating environment to estimate the distances to the
reference nodes. Trilateration is then used by the blind device to identify its
own location, similar to that used in the GPS-based system. Simulation and
empirical testing ascertained that the proposed approach can potentially be the
core of future indoor and GPS-obstructed environments
Off-line evaluation of mobile-centric indoor positioning systems: the experiences from the 2017 IPIN competition
The development of indoor positioning solutions using smartphones is a growing activity with an enormous potential for everyday life and professional applications. The research activities on this topic concentrate on the development of new positioning solutions that are tested in specific environments under their own evaluation metrics. To explore the real positioning quality of smartphone-based solutions and their capabilities for seamlessly adapting to different scenarios, it is needed to find fair evaluation frameworks. The design of competitions using extensive pre-recorded datasets is a valid way to generate open data for comparing the different solutions created by research teams. In this paper, we discuss the details of the 2017 IPIN indoor localization competition, the different datasets created, the teams participating in the event, and the results they obtained. We compare these results with other competition-based approaches (Microsoft and Perf-loc) and on-line evaluation web sites. The lessons learned by organising these competitions and the benefits for the community are addressed along the paper. Our analysis paves the way for future developments on the standardization of evaluations and for creating a widely-adopted benchmark strategy for researchers and companies in the field.We would like to thank Topcon Corporation for sponsoring the competition track with an award for the winning team. We are also grateful to Francesco Potorti, Sangjoon Park, Hideo Makino, Nobuo Kawaguchi, Takeshi Kurata and Jesus Urena for their invaluable help in organizing and promoting the IPIN competition and conference. Many thanks to Raul Montoliu, Emilio Sansano, Marina Granel and Luis Alisandra for collecting the databases in the UJITI building. Parts of this work were carried out with the financial support received from projects and grants: REPNIN network (TEC2015-71426-REDT), LORIS (TIN2012-38080-C04-04), TARSIUS (TIN2015-71564-C4-2-R (MINECO/FEDER)), SmartLoc (CSIC-PIE Ref. 201450E011), "Metodologias avanzadas para el diseno, desarrollo, evaluacion e integracion de algoritmos de localizacion en interiores" (TIN2015-70202-P), GEO-C (Project ID: 642332, H2020-MSCA-ITN-2014-Marie Sklodowska-Curie Action: Innovative Training Networks), and financial support from the Ministry of Science and Technology, Taiwan (106-3114-E-007-005 and 105-2221-E-155-013-MY3). The HFTS team has been supported in the frame of the German Federal Ministry of Education and Research programme "FHprofUnt2013" under contract 03FH035PB3 (Project SPIRIT). The UMinho team has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT-Fundacao para a Ciencia e Tecnologia within the Project Scope: UID/CEC/00319/2013. G.M. Mendoza-Silva gratefully acknowledges funding from grant PREDOC/2016/55 by Universitat Jaume I.info:eu-repo/semantics/publishedVersio
Seamless Positioning and Navigation in Urban Environment
L'abstract è presente nell'allegato / the abstract is in the attachmen
A multimodal Fingerprint-based Indoor Positioning System for airports
[EN] Indoor Localization techniques are becoming popular in order to provide a seamless indoor positioning system enhancing the traditional GPS service that is only suitable for outdoor environments. Though there are proprietary and costly approaches targeting high accuracy positioning, Wi-Fi and BLE networks are widely deployed in many public and private buildings (e.g. shopping malls, airports, universities, etc.). These networks are accessible through mobile phones resulting in an effective commercial off-the-self basic infrastructure for an indoor service. The obtained positioning accuracy is still being improved and there is on-going research on algorithms adapted for Wi-Fi and BLE and also for the particularities of indoor environments. This paper focuses not only on indoor positioning techniques, but also on a multimodal approach. Traditional proposals employ only one network technology whereas this paper integrates two different technologies in order to provide improved accuracy. It also sets the basis for combining (merging) additional technologies, if available. The initial results show that the positioning service performs better with a multimodal approach compared to individual (monomodal) approaches and even compared with Google¿s geolocation service in public spaces such as airports.This work was supported in part by the European Commission through the Door to Door Information for Airports and Airlines Project under Grant GA 635885 and in part by the European Commission through the Interoperability of Heterogeneous IoT Platforms Project under Grant 687283.Molina Moreno, B.; Olivares-Gorriti, E.; Palau Salvador, CE.; Esteve Domingo, M. (2018). A multimodal Fingerprint-based Indoor Positioning System for airports. IEEE Access. 6:10092-10106. https://doi.org/10.1109/ACCESS.2018.2798918S1009210106
Map matching by using inertial sensors: literature review
This literature review aims to clarify what is known about map matching by
using inertial sensors and what are the requirements for map matching, inertial
sensors, placement and possible complementary position technology. The target
is to develop a wearable location system that can position itself within a complex
construction environment automatically with the aid of an accurate building model.
The wearable location system should work on a tablet computer which is running
an augmented reality (AR) solution and is capable of track and visualize 3D-CAD
models in real environment. The wearable location system is needed to support the
system in initialization of the accurate camera pose calculation and automatically
finding the right location in the 3D-CAD model. One type of sensor which does seem
applicable to people tracking is inertial measurement unit (IMU). The IMU sensors
in aerospace applications, based on laser based gyroscopes, are big but provide a
very accurate position estimation with a limited drift. Small and light units such
as those based on Micro-Electro-Mechanical (MEMS) sensors are becoming very
popular, but they have a significant bias and therefore suffer from large drifts and
require method for calibration like map matching. The system requires very little
fixed infrastructure, the monetary cost is proportional to the number of users, rather
than to the coverage area as is the case for traditional absolute indoor location
systems.Siirretty Doriast
Self-healing radio maps of wireless networks for indoor positioning
Programa Doutoral em Telecomunicações MAP-tele das Universidades do Minho, Aveiro e PortoA Indústria 4.0 está a impulsionar a mudança para novas formas de produção e otimização em tempo real
nos espaços industriais que beneficiam das capacidades da Internet of Things (IoT) nomeadamente,
a localização de veículos para monitorização e optimização de processos. Normalmente os espaços industriais
possuem uma infraestrutura Wi-Fi que pode ser usada para localizar pessoas, bens ou veículos,
sendo uma oportunidade para aumentar a produtividade. Os mapas de rádio são importantes para os
sistemas de posicionamento baseados em Wi-Fi, porque representam o ambiente de rádio e são usados
para estimar uma posição. Os mapas de rádio são constituídos por amostras Wi-Fi recolhidas em posições
conhecidas e degradam-se ao longo do tempo devido a vários fatores, por exemplo, efeitos de propagação,
adição/remoção de APs, entre outros. O processo de construção do mapa de rádio costuma ser exigente
em termos de tempo e recursos humanos, constituindo um desafio considerável. Os veículos, que operam
em ambientes industriais podem ser explorados para auxiliar na construção de mapas de rádio, desde que
seja possível localizá-los e rastreá-los. O objetivo principal desta tese é desenvolver um sistema de posicionamento
para veículos industriais com mapas de rádio auto-regenerativos (capaz de manter os mapas
de rádio atualizados). Os veículos são localizados através da fusão sensorial de Wi-Fi com sensores de
movimento, que permitem anotar novas amostras Wi-Fi para o mapa de rádio auto-regenerativo. São propostas
duas abordagens de fusão sensorial, baseadas em Loose Coupling e Tight Coupling, para a
localização dos veículos. A abordagem Tight Coupling inclui uma métrica de confiança para determinar
quando é que as amostras de Wi-Fi devem ser anotadas. Deste modo, esta solução não requer calibração
nem esforço humano para a construção e manutenção do mapa de rádio. Os resultados obtidos em experiências
sugerem que esta solução tem potencial para a IoT e a Indústria 4.0, especialmente em serviços
de localização, mas também na monitorização, suporte à navegação autónoma, e interconectividade.Industry 4.0 is driving change for new forms of production and real-time optimization in factories, which
benefit from the Industrial Internet of Things (IoT) capabilities to locate industrial vehicles for monitoring,
improving safety, and operations. Most industrial environments have a Wi-Fi infrastructure that can be
exploited to locate people, assets, or vehicles, providing an opportunity for enhancing productivity and
interconnectivity. Radio maps are important for Wi-Fi-based Indoor Position Systems (IPSs) since they
represent the radio environment and are used to estimate a position. Radio maps comprise a set of Wi-
Fi samples collected at known positions, and degrade over time due to several aspects, e.g., propagation
effects, addition/removal of Access Points (APs), among others, hence they should be periodically updated
to maintain the IPS performance. The process to build and maintain radio maps is usually time-consuming
and demanding in terms of human resources, thus being challenging to perform. Vehicles, commonly
present in industrial environments, can be explored to help build and maintain radio maps, as long as it
is possible to locate and track them. The main objective of this thesis is to develop an IPS for industrial
vehicles with self-healing radio maps (capable of keeping radio maps up to date). Vehicles are tracked
using sensor fusion of Wi-Fi with motion sensors, which allows to annotate new Wi-Fi samples to build the
self-healing radio maps. Two sensor fusion approaches based on Loose Coupling and Tight Coupling are
proposed to track vehicles. The Tight Coupling approach includes a reliability metric to determine when
Wi-Fi samples should be annotated. As a result, this solution does not depend on any calibration or human
effort to build and maintain the radio map. Results obtained in real-world experiments suggest that this
solution has potential for IoT and Industry 4.0, especially in location services, but also in monitoring and
analytics, supporting autonomous navigation, and interconnectivity between devices.MAP-Tele Doctoral Programme scientific committee and the FCT (Fundação para a Ciência e Tecnologia) for the PhD grant (PD/BD/137401/2018
- …