Cooperative localisation in underwater robotic swarms for ocean bottom seismic imaging.

Spatial information must be collected alongside the data modality of interest in wide variety of sub-sea applications, such as deep sea exploration, environmental monitoring, geological and ecological research, and samples collection. Ocean-bottom seismic surveys are vital for oil and gas exploration, and for productivity enhancement of an existing production facility. Ocean-bottom seismic sensors are deployed on the seabed to acquire those surveys. Node deployment methods used in industry today are costly, time-consuming and unusable in deep oceans. This study proposes the autonomous deployment of ocean-bottom seismic nodes, implemented by a swarm of Autonomous Underwater Vehicles (AUVs). In autonomous deployment of ocean-bottom seismic nodes, a swarm of sensor-equipped AUVs are deployed to achieve ocean-bottom seismic imaging through collaboration and communication. However, the severely limited bandwidth of underwater acoustic communications and the high cost of maritime assets limit the number of AUVs that can be deployed for experiments. A holistic fuzzy-based localisation framework for large underwater robotic swarms (i.e. with hundreds of AUVs) to dynamically fuse multiple position estimates of an autonomous underwater vehicle is proposed. Simplicity, exibility and scalability are the main three advantages inherent in the proposed localisation framework, when compared to other traditional and commonly adopted underwater localisation methods, such as the Extended Kalman Filter. The proposed fuzzy-based localisation algorithm improves the entire swarm mean localisation error and standard deviation (by 16.53% and 35.17% respectively) at a swarm size of 150 AUVs when compared to the Extended Kalman Filter based localisation with round-robin scheduling. The proposed fuzzy based localisation method requires fuzzy rules and fuzzy set parameters tuning, if the deployment scenario is changed. Therefore a cooperative localisation scheme that relies on a scalar localisation confidence value is proposed. A swarm subset is navigationally aided by ultra-short baseline and a swarm subset (i.e. navigation beacons) is configured to broadcast navigation aids (i.e. range-only), once their confidence values are higher than a predetermined confidence threshold. The confidence value and navigation beacons subset size are two key parameters for the proposed algorithm, so that they are optimised using the evolutionary multi-objective optimisation algorithm NSGA-II to enhance its localisation performance. Confidence value-based localisation is proposed to control the cooperation dynamics among the swarm agents, in terms of aiding acoustic exteroceptive sensors. Given the error characteristics of a commercially available ultra-short baseline system and the covariance matrix of a trilaterated underwater vehicle position, dead reckoning navigation - aided by Extended Kalman Filter-based acoustic exteroceptive sensors - is performed and controlled by the vehicle's confidence value. The proposed confidence-based localisation algorithm has significantly improved the entire swarm mean localisation error when compared to the fuzzy-based and round-robin Extended Kalman Filter-based localisation methods (by 67.10% and 59.28% respectively, at a swarm size of 150 AUVs). The proposed fuzzy-based and confidence-based localisation algorithms for cooperative underwater robotic swarms are validated on a co-simulation platform. A physics-based co-simulation platform that considers an environment's hydrodynamics, industrial grade inertial measurement unit and underwater acoustic communications characteristics is implemented for validation and optimisation purposes

Probablistic approaches for intelligent AUV localisation

This thesis studies the problem of intelligent localisation for an autonomous underwater vehicle (AUV). After an introduction about robot localisation and specific issues in the underwater domain, the thesis will focus on passive techniques for AUV localisation, highlighting experimental results and comparison among different techniques. Then, it will develop active techniques, which require intelligent decisions about the steps to undertake in order for the AUV to localise itself. The undertaken methodology consisted in three stages: theoretical analysis of the problem, tests with a simulation environment, integration in the robot architecture and field trials. The conclusions highlight applications and scenarios where the developed techniques have been successfully used or can be potentially used to enhance the results given by current techniques. The main contribution of this thesis is in the proposal of an active localisation module, which is able to determine the best set of action to be executed, in order to maximise the localisation results, in terms of time and efficiency

Cooperative localization for autonomous underwater vehicles

Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and the Woods Hole Oceanographic Institution February 2009Self-localization of an underwater vehicle is particularly challenging due to the absence of Global Positioning System (GPS) reception or features at known positions that could otherwise have been used for position computation. Thus Autonomous Underwater Vehicle (AUV) applications typically require the pre-deployment of a set of beacons. This thesis examines the scenario in which the members of a group of AUVs exchange navigation information with one another so as to improve their individual position estimates. We describe how the underwater environment poses unique challenges to vehicle navigation not encountered in other environments in which robots operate and how cooperation can improve the performance of self-localization. As intra-vehicle communication is crucial to cooperation, we also address the constraints of the communication channel and the effect that these constraints have on the design of cooperation strategies. The classical approaches to underwater self-localization of a single vehicle, as well as more recently developed techniques are presented. We then examine how methods used for cooperating land-vehicles can be transferred to the underwater domain. An algorithm for distributed self-localization, which is designed to take the specific characteristics of the environment into account, is proposed. We also address how correlated position estimates of cooperating vehicles can lead to overconfidence in individual position estimates. Finally, key to any successful cooperative navigation strategy is the incorporation of the relative positioning between vehicles. The performance of localization algorithms with different geometries is analyzed and a distributed algorithm for the dynamic positioning of vehicles, which serve as dedicated navigation beacons for a fleet of AUVs, is proposed.This work was funded by Office of Naval Research grants N00014-97-1-0202, N00014-05-1-0255, N00014-02-C-0210, N00014-07-1-1102 and the ASAP MURI program led by Naomi Leonard of Princeton University

A Survey of Positioning Systems Using Visible LED Lights

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe

AN INFORMATION THEORETIC APPROACH TO INTERACTING MULTIPLE MODEL ESTIMATION FOR AUTONOMOUS UNDERWATER VEHICLES

Accurate and robust autonomous underwater navigation (AUV) requires the fundamental task of position estimation in a variety of conditions. Additionally, the U.S. Navy would prefer to have systems that are not dependent on external beacon systems such as global positioning system (GPS), since they are subject to jamming and spoofing and can reduce operational effectiveness. Current methodologies such as Terrain-Aided Navigation (TAN) use exteroceptive imaging sensors for building a local reference position estimate and will not be useful when those sensors are out of range. What is needed are multiple navigation filters where each can be more effective depending on the mission conditions. This thesis investigates how to combine multiple navigation filters to provide a more robust AUV position estimate. The solution presented is to blend two different filtering methodologies utilizing an interacting multiple model (IMM) estimation approach based on an information theoretic framework. The first filter is a model-based Extended Kalman Filter (EKF) that is effective under dead reckoning (DR) conditions. The second is a Particle Filter approach for Active Terrain Aided Navigation (ATAN) that is appropriate when in sensor range. Using data collected at Lake Crescent, Washington, each of the navigation filters are developed with results and then we demonstrate how an IMM information theoretic approach can be used to blend approaches to improve position and orientation estimation.Lieutenant, United States NavyApproved for public release. Distribution is unlimited

Sensor Fusion for Mobile Robot Localization using UWB and ArUco Markers

Uma das principais características para considerar um robô autónomo é o facto de este ser capaz de se localizar, em tempo real, no seu ambiente, ou seja saber a sua posição e orientação. Esta é uma área desafiante que tem sido estudada por diversos investigadores em todo o mundo. Para obter a localização de um robô é possível recorrer a diferentes metodologias. No entanto há metodologias que apresentam problemas em diferentes circunstâncias, como é o caso da odometria que sofre de acumulação de erros com a distância percorrida pelo robô. Outro problema existente em diversas metodologias é a incerteza na deteção do robô devido a ruído presente nos sensores. Com o intuito de obter uma localização mais robusta do robô e mais tolerante a falhas é possível combinar diversos sistemas de localização, combinando assim as vantagens de cada um deles. Neste trabalho, será utilizado o sistema Pozyx, uma solução de baixo custo que fornece informação de posicionamento com o auxílio da tecnologia Ultra-WideBand Time-of-Flight (UWB ToF). Também serão utilizados marcadores ArUco colocados no ambiente que através da sua identificação por uma câmara é também possível obter informação de posicionamento. Estas duas soluções irão ser estudadas e implementadas num robô móvel, através de um esquema de localização baseada em marcadores. Primeiramente, irá ser feita uma caracterização do erro de ambos os sistemas, uma vez que as medidas não são perfeitas, havendo sempre algum ruído nas medições. De seguida, as medidas fornecidas pelos sistemas irão ser filtradas e fundidas com os valores da odometria do robô através da implementação de um Filtro de Kalman Extendido (EKF). Assim, é possível obter a pose do robô (posição e orientação), pose esta que é comparada com a pose fornecida por um sistema de Ground-Truth igualmente desenvolvido para este trabalho com o auxílio da libraria ArUco, percebendo assim a precisão do algoritmo desenvolvido. O trabalho desenvolvido mostrou que com a utilização do sistema Pozyx e dos marcadores ArUco é possível melhorar a localização do robô, o que significa que é uma solução adequada e eficaz para este fim.One of the main characteristics to consider a robot truly autonomous is the fact that it is able to locate itself, in real time, in its environment, that is, to know its position and orientation. This is a challenging area that has been studied by several researchers around the world. To obtain the localization of a robot it is possible to use different methodologies. However, there are methodologies that present problems in different circumstances, as is the case of odometry that suffers from error accumulation with the distance traveled by the robot. Another problem existing in several methodologies is the uncertainty in the sensing of the robot due to noise present in the sensors. In order to obtain a more robust localization of the robot and more fault tolerant it is possible to combine several localization systems, thus combining the advantages of each one. In this work, the Pozyx system will be used, a low-cost solution that provides positioning information through Ultra-WideBand Time-of-Flight (UWB ToF) technology. It will also be used ArUco markers placed in the environment that through their identification by a camera it is also possible to obtain positioning information. These two solutions will be studied and implemented in a mobile robot, through a beacon-based localization scheme. First, an error characterization of both systems will be performed, since the measurements are not perfect, and there is always some noise in the measurements. Next, the measurements provided by the systems will be filtered and fused with the robot's odometry values by the implementation of an Extended Kalman Filter (EKF). In this way, it is possible to obtain the robot's pose, i.e position and orientation, which is compared with the pose provided by a Ground-Truth system also developed for this work with the aid of the ArUco library, thus realizing the accuracy of the developed algorithm. The developed work showed that with the use of the Pozyx system and ArUco markers it is possible to improve the robot localization, meaning that it is an adequate and effective solution for this purpose

Deep-Sea Model-Aided Navigation Accuracy for Autonomous Underwater Vehicles Using Online Calibrated Dynamic Models

In this work, the accuracy of inertial-based navigation systems for autonomous underwater vehicles (AUVs) in typical mapping and exploration missions up to 5000m depth is examined. The benefit of using an additional AUV motion model in the navigation is surveyed. Underwater navigation requires acoustic positioning sensors. In this work, so-called Ultra-Short-Baseline (USBL) devices were used allowing the AUV to localize itself relative to an opposite device attached to a (surface) vehicle. Despite their easy use, the devices\u27 absolute positioning accuracy decreases proportional to range. This makes underwater navigation a sophisticated estimation task requiring integration of multiple sensors for inertial, orientation, velocity and position measurements. First, error models for the necessary sensors are derived. The emphasis is on the USBL devices due to their key role in navigation - besides a velocity sensor based on the Doppler effect. The USBL model is based on theoretical considerations and conclusions from experimental data. The error models and the navigation algorithms are evaluated on real-world data collected during field experiments in shallow sea. The results of this evaluation are used to parametrize an AUV motion model. Usually, such a model is used only for model-based motion control and planning. In this work, however, besides serving as a simulation reference model, it is used as a tool to improve navigation accuracy by providing virtual measurements to the navigation algorithm (model-aided navigation). The benefit of model-aided navigation is evaluated through Monte Carlo simulation in a deep-sea exploration mission. The final and main contributions of this work are twofold. First, the basic expected navigation accuracy for a typical deep-sea mission with USBL and an ensemble of high-quality navigation sensors is evaluated. Secondly, the same setting is examined using model-aided navigation. The model-aiding is activated after the AUV gets close to sea-bottom. This reflects the case where the motion model is identified online which is only feasible if the velocity sensor is close to the ground (e.g. 100m or closer). The results indicate that, ideally, deep-sea navigation via USBL can be achieved with an accuracy in range of 3-15m w.r.t. the expected root-mean-square error. This also depends on the reference vehicle\u27s position at the surface. In case the actual estimation certainty is already below a certain threshold (ca. <4m), the simulations reveal that the model-aided scheme can improve the navigation accuracy w.r.t. position by 3-12%

Efficient particle filter algorithm for ultrasonic sensor-based 2D range-only simultaneous localisation and mapping application

Owing to low cost and relatively accurate range measurement, ultrasonic sensors are widely used in various simultaneous localisation and mapping (SLAM) applications. In spite of the abundance of ultrasonic sensor based SLAM applications, a simple and efficient algorithm for an ultrasonic sensor based positioning system with good accuracy and low computational complexity has not yet emerged. The major difficulty is the trade-off between localisation accuracy and computational complexity in most SLAM algorithms, such as extended Kalman filter (EKF) and particle filter. Typically, they improve localisation accuracy by increasing the density of the landmarks, as a result leading to high computational complexity of algorithms and limiting the utilisation of algorithms into online SLAM systems. This study addresses an improved particle filter algorithm to solve ultrasonic sensor based 2D range-only SLAM problem with relatively good accuracy and low computational complexity. This algorithm uses a simple four fixed features based system model to limit the density of the landmarks. A technique called map adjustment is proposed to increase the accuracy and efficiency of the algorithm. Using map adjustment, the proposed particle filter algorithm can improve localisation accuracy and lower computational complexity. The experiment results demonstrate that this algorithm has a better performance than conventional particle filter localisation algorithm

Optimal path shape for range-only underwater target localization using a Wave Glider

Underwater localization using acoustic signals is one of the main components in a navigation system for an autonomous underwater vehicle (AUV) as a more accurate alternative to dead-reckoning techniques. Although different methods based on the idea of multiple beacons have been studied, other approaches use only one beacon, which reduces the system’s costs and deployment complexity. The inverse approach for single-beacon navigation is to use this method for target localization by an underwater or surface vehicle. In this paper, a method of range-only target localization using a Wave Glider is presented, for which simulations and sea tests have been conducted to determine optimal parameters to minimize acoustic energy use and search time, and to maximize location accuracy and precision. Finally, a field mission is presented, where a Benthic Rover (an autonomous seafloor vehicle) is localized and tracked using minimal human intervention. This mission shows, as an example, the power of using autonomous vehicles in collaboration for oceanographic research.Peer ReviewedPostprint (author's final draft