9 research outputs found
Towards Computational Efficiency of Next Generation Multimedia Systems
To address throughput demands of complex applications (like Multimedia), a next-generation system designer needs to co-design and co-optimize the hardware and software layers. Hardware/software knobs must be tuned in synergy to increase the throughput efficiency. This thesis provides such algorithmic and architectural solutions, while considering the new technology challenges (power-cap and memory aging). The goal is to maximize the throughput efficiency, under timing- and hardware-constraints
Embedded electronic systems driven by run-time reconfigurable hardware
Abstract
This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen
Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnologÃa hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando asà su implementación fÃsica –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnologÃa a través del prototipado de varias aplicaciones de ingenierÃa (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum
Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinà micament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinà mica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant aixà la seva implementació fÃsica –à rea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware està tic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria
Reliability and Security of Compute-In-Memory Based Deep Neural Network Accelerators
Compute-In-Memory (CIM) is a promising solution for accelerating DNNs at edge devices, utilizing mixed-signal computations. However, it requires more cross-layer designs from algorithm levels to hardware implementations as it behaves differently from the pure digital system. On one side, the mixed-signal computations of CIM face unignorable variations, which could hamper the software performance. On the other side, there are potential software/hardware security vulnerabilities with CIM accelerators. This research aims to solve the reliability and security issues in CIM design for accelerating Deep Neural Network (DNN) algorithms as they prevent the real-life use of the CIM-based accelerators. Some non-ideal effects in CIM accelerators are explored, which could cause reliability issues, and solved by the software-hardware co-design methods. In addition, different security vulnerabilities for SRAM-based CIM and eNVM-based CIM inference engines are defined, and corresponding countermeasures are proposed.Ph.D
Fault-tolerant satellite computing with modern semiconductors
Miniaturized satellites enable a variety space missions which were in the past infeasible, impractical or uneconomical with traditionally-designed heavier spacecraft. Especially CubeSats can be launched and manufactured rapidly at low cost from commercial components, even in academic environments. However, due to their low reliability and brief lifetime, they are usually not considered suitable for life- and safety-critical services, complex multi-phased solar-system-exploration missions, and missions with a longer duration. Commercial electronics are key to satellite miniaturization, but also responsible for their low reliability: Until 2019, there existed no reliable or fault-tolerant computer architectures suitable for very small satellites. To overcome this deficit, a novel on-board-computer architecture is described in this thesis.Robustness is assured without resorting to radiation hardening, but through software measures implemented within a robust-by-design multiprocessor-system-on-chip. This fault-tolerant architecture is component-wise simple and can dynamically adapt to changing performance requirements throughout a mission. It can support graceful aging by exploiting FPGA-reconfiguration and mixed-criticality. Experimentally, we achieve 1.94W power consumption at 300Mhz with a Xilinx Kintex Ultrascale+ proof-of-concept, which is well within the powerbudget range of current 2U CubeSats. To our knowledge, this is the first COTS-based, reproducible on-board-computer architecture that can offer strong fault coverage even for small CubeSats.European Space AgencyComputer Systems, Imagery and Medi
Design Space Exploration and Resource Management of Multi/Many-Core Systems
The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends
Fundamentals
Volume 1 establishes the foundations of this new field. It goes through all the steps from data collection, their summary and clustering, to different aspects of resource-aware learning, i.e., hardware, memory, energy, and communication awareness. Machine learning methods are inspected with respect to resource requirements and how to enhance scalability on diverse computing architectures ranging from embedded systems to large computing clusters
Fundamentals
Volume 1 establishes the foundations of this new field. It goes through all the steps from data collection, their summary and clustering, to different aspects of resource-aware learning, i.e., hardware, memory, energy, and communication awareness. Machine learning methods are inspected with respect to resource requirements and how to enhance scalability on diverse computing architectures ranging from embedded systems to large computing clusters
NASA Tech Briefs, February 1993
Topics include: Communication Technology; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences
Understanding Quantum Technologies 2022
Understanding Quantum Technologies 2022 is a creative-commons ebook that
provides a unique 360 degrees overview of quantum technologies from science and
technology to geopolitical and societal issues. It covers quantum physics
history, quantum physics 101, gate-based quantum computing, quantum computing
engineering (including quantum error corrections and quantum computing
energetics), quantum computing hardware (all qubit types, including quantum
annealing and quantum simulation paradigms, history, science, research,
implementation and vendors), quantum enabling technologies (cryogenics, control
electronics, photonics, components fabs, raw materials), quantum computing
algorithms, software development tools and use cases, unconventional computing
(potential alternatives to quantum and classical computing), quantum
telecommunications and cryptography, quantum sensing, quantum technologies
around the world, quantum technologies societal impact and even quantum fake
sciences. The main audience are computer science engineers, developers and IT
specialists as well as quantum scientists and students who want to acquire a
global view of how quantum technologies work, and particularly quantum
computing. This version is an extensive update to the 2021 edition published in
October 2021.Comment: 1132 pages, 920 figures, Letter forma