A Demonstration of the Effects of Digitization on the Calculation of Kurtosis for the Detection of RFI in Microwave Radiometry

Abstract-Microwave radiometers detecting geophysical parameters are very susceptible to radio-frequency interference (RFI) from anthropogenic sources. RFI is always additive to a brightness observation, and so the presence of RFI can bias geophysical parameter retrieval. As microwave radiometers typically have the most sensitive receivers operating in their band, low-level RFI is both significant and difficult to identify. The kurtosis statistic can be a powerful means of identifying some types of low-level RFI, as thermal noise has a distinct kurtosis value of three, whereas thermal noise contaminated even with low-level nonthermal RFI often has other values of kurtosis. This paper derives some benign distortions of the kurtosis statistic due to digitization effects and demonstrates these effects with a laboratory experiment in which a known amount of low-level RFI is injected into a digital microwave radiometer

A review of RFI mitigation techniques in microwave radiometry

Radio frequency interference (RFI) is a well-known problem in microwave radiometry (MWR). Any undesired signal overlapping the MWR protected frequency bands introduces a bias in the measurements, which can corrupt the retrieved geophysical parameters. This paper presents a literature review of RFI detection and mitigation techniques for microwave radiometry from space. The reviewed techniques are divided between real aperture and aperture synthesis. A discussion and assessment of the application of RFI mitigation techniques is presented for each type of radiometer.Peer ReviewedPostprint (published version

Analysis of RFI Identification and Mitigation in CAROLS Radiometer Data Using a Hardware Spectrum Analyser

A method to identify and mitigate radio frequency interference (RFI) in microwave radiometry based on the use of a spectrum analyzer has been developed. This method has been tested with CAROLS L-band airborne radiometer data that are strongly corrupted by RFI. RFI is a major limiting factor in passive microwave remote sensing interpretation. Although the 1.400–1.427 GHz bandwidth is protected, RFI sources close to these frequencies are still capable of corrupting radiometric measurements. In order to reduce the detrimental effects of RFI on brightness temperature measurements, a new spectrum analyzer has been added to the CAROLS radiometer system. A post processing algorithm is proposed, based on selective filters within the useful bandwidth divided into sub-bands. Two discriminant analyses based on the computation of kurtosis and Euclidian distances have been compared evaluated and validated in order to accurately separate the RF interference from natural signals

Development of Radio Frequency Interference Detection Algorithm for Passive Microwave Remote Sensing

Radio Frequency Interference (RFI) signals are man-made sources that are increasingly plaguing passive microwave remote sensing measurements. RFI is of insidious nature, with some signals low power enough to go undetected but large enough to impact science measurements and their results. With the launch of the European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite in November 2009 and the upcoming launches of the new NASA sea-surface salinity measuring Aquarius mission in June 2011 and soil-moisture measuring Soil Moisture Active Passive (SMAP) mission around 2015, active steps are being taken to detect and mitigate RFI at L-band. An RFI detection algorithm was designed for the Aquarius mission. The algorithm performance was analyzed using kurtosis based RFI ground-truth. The algorithm has been developed with several adjustable location dependant parameters to control the detection statistics (false-alarm rate and probability of detection). The kurtosis statistical detection algorithm has been compared with the Aquarius pulse detection method. The comparative study determines the feasibility of the kurtosis detector for the SMAP radiometer, as a primary RFI detection algorithm in terms of detectability and data bandwidth. The kurtosis algorithm has superior detection capabilities for low duty-cycle radar like pulses, which are more prevalent according to analysis of field campaign data. Most RFI algorithms developed have generally been optimized for performance with individual pulsed-sinusoidal RFI sources. A new RFI detection model is developed that takes into account multiple RFI sources within an antenna footprint. The performance of the kurtosis detection algorithm under such central-limit conditions is evaluated. The SMOS mission has a unique hardware system, and conventional RFI detection techniques cannot be applied. Instead, an RFI detection algorithm for SMOS is developed and applied in the angular domain. This algorithm compares brightness temperature values at various incidence angles for a particular grid location. This algorithm is compared and contrasted with other algorithms present in the visibility domain of SMOS, as well as the spatial domain. Initial results indicate that the SMOS RFI detection algorithm in the angular domain has a higher sensitivity and lower false-alarm rate than algorithms developed in the other two domains.Ph.D.Atmospheric and Space SciencesUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86308/1/samisra_1.pd

Soil Moisture Active Passive (SMAP) Project Algorithm Theoretical Basis Document SMAP L1B Radiometer Data Product: L1B_TB

The purpose of the Soil Moisture Active Passive (SMAP) radiometer calibration algorithm is to convert Level 0 (L0) radiometer digital counts data into calibrated estimates of brightness temperatures referenced to the Earth's surface within the main beam. The algorithm theory in most respects is similar to what has been developed and implemented for decades for other satellite radiometers; however, SMAP includes two key features heretofore absent from most satellite borne radiometers: radio frequency interference (RFI) detection and mitigation, and measurement of the third and fourth Stokes parameters using digital correlation. The purpose of this document is to describe the SMAP radiometer and forward model, explain the SMAP calibration algorithm, including approximations, errors, and biases, provide all necessary equations for implementing the calibration algorithm and detail the RFI detection and mitigation process. Section 2 provides a summary of algorithm objectives and driving requirements. Section 3 is a description of the instrument and Section 4 covers the forward models, upon which the algorithm is based. Section 5 gives the retrieval algorithm and theory. Section 6 describes the orbit simulator, which implements the forward model and is the key for deriving antenna pattern correction coefficients and testing the overall algorithm

Software correlators as testbeds for RFI algorithms

In-correlator techniques offer the possibility of identifying and/or excising radio frequency interference (RFI) from interferometric observations at much higher time and/or frequency resolution than is generally possible with the final visibility dataset. Due to the considerable computational requirements of the correlation procedure, cross-correlators have most commonly been implemented using high-speed digital signal processing boards, which typically require long development times and are difficult to alter once complete. "Software" correlators, on the other hand, make use of commodity server machines and a correlation algorithm coded in a high-level language. They are inherently much more flexible and can be developed - and modified - much more rapidly than purpose-built "hardware" correlators. Software correlators are thus a natural choice for testing new RFI detection and mitigation techniques for interferometers. The ease with which software correlators can be adapted to test RFI detection algorithms is demonstrated by the addition of kurtosis detection and plotting to the widely used DiFX software correlator, which highlights previously unknown short -duration RFI at the Hancock VLBA station.Comment: 6 pages, 1 figure, accepted for publication in Proceedings of Science [PoS(RFI2010)035]. Presented at RFI2010, the Third Workshop on RFI Mitigation in Radio Astronomy, 29-31 March 2010, Groningen, The Netherland

On the detection of RFI through the correlation anomaly at different time lags

Microwave radiometers can be considerably affected by Radio Frequency Interference (RFI). These man-made interference conceal the underlying natural signal, preventing the retrieval of geophysical variables. Adopting on-board detection and mitigation techniques is a requirement to reduce the impact of RFI. Several families of RFI detection algorithms have been developed over the last years (e.g. [1]–[4]). In this work, a new detection technique is proposed and its performance analyzed. It is based in the distortion of the shape of the cross-correlation function at lags different from zero under the presence of RFI. Its performance is compared to other common RFI mitigation algorithms. Proposed methods' performance is found to surpass other common algorithms such as signal Kurtosis, while presenting some convenient properties for its practical application in correlation and synthetic aperture radiometers.Peer ReviewedPostprint (author's final draft

Radio frequency interference in microwave radiometry: statistical analysis and study of techniques for detection and mitigation

Microwave radiometry field has been increasing its performance with higher accuracy measurements, leading to a more presence in the remote sensing field. Several space-borne, air-borne and ground-based radiometers have been developed to perform measurement campaigns; however, the actual sensitivity of a radiometer is often limited by man-made radio emissions such as radars, broadcasting emissions, wireless communications and many other communication systems based on electromagnetic waves, limiting the improvement in the radiometers¿ performance. Consequently, in order to maintain the accuracy in the radiometric measurements, it has been researched in the Radio Frequency Interference (RFI) detection and mitigation systems and algorithms for the microwave radiometry field. The scope of this doctoral thesis is the development and testing of RFI detection and mitigation algorithms in order to enhance radiometric measurements performed by the Multifequency Experimental Radiometer with Interference Tracking for Experiments over Land and Littoral (MERITXELL). The MERITXELL has been developed during this thesis with the idea studying the RFI present in several radiometric bands and the way to mitigate it, as well as to obtain data from diverse frequency bands and devices in only one measurement campaign