Optimizing Scrubbing by Netlist Analysis for FPGA Configuration Bit Classification and Floorplanning

Existing scrubbing techniques for SEU mitigation on FPGAs do not guarantee an error-free operation after SEU recovering if the affected configuration bits do belong to feedback loops of the implemented circuits. In this paper, we a) provide a netlist-based circuit analysis technique to distinguish so-called critical configuration bits from essential bits in order to identify configuration bits which will need also state-restoring actions after a recovered SEU and which not. Furthermore, b) an alternative classification approach using fault injection is developed in order to compare both classification techniques. Moreover, c) we will propose a floorplanning approach for reducing the effective number of scrubbed frames and d), experimental results will give evidence that our optimization methodology not only allows to detect errors earlier but also to minimize the Mean-Time-To-Repair (MTTR) of a circuit considerably. In particular, we show that by using our approach, the MTTR for datapath-intensive circuits can be reduced by up to 48.5% in comparison to standard approaches

An adaptive method to tolerate soft errors in SRAM-based FPGAs

AbstractIn this paper, we present an adaptive method that is a combination of SEU-avoidance in CAD flow and adaptive redundancy to tolerate soft error effects in SRAM-based FPGAs. This method is based on the modification of T-VPack and VPR tools. Three different steps of these tools are modified for SEU-awareness: (1) clustering, (2) placement and (3) routing. Then we use the unused resources as redundancy. We have investigated the effect of this method on several MCNC benchmarks. This investigation has been performed using three experiments: (1) SEU-awareness in clustering with redundancy, (2) SEU-awareness in clustering and placement with redundancy and (3) SEU-awareness in clustering, placement and routing with redundancy. With a confidence level of 95%, the results show that, using each of these three experiments, the system failure rate of ten MCNC circuits has been decreased between 4.52% and 10.42%, between 10.25% and 21.63%, and between 10.48% and 24.39%, respectively

Fault Tolerant Electronic System Design

Due to technology scaling, which means reduced transistor size, higher density, lower voltage and more aggressive clock frequency, VLSI devices may become more sensitive against soft errors. Especially for those devices used in safety- and mission-critical applications, dependability and reliability are becoming increasingly important constraints during the development of system on/around them. Other phenomena (e.g., aging and wear-out effects) also have negative impacts on reliability of modern circuits. Recent researches show that even at sea level, radiation particles can still induce soft errors in electronic systems. On one hand, processor-based system are commonly used in a wide variety of applications, including safety-critical and high availability missions, e.g., in the automotive, biomedical and aerospace domains. In these fields, an error may produce catastrophic consequences. Thus, dependability is a primary target that must be achieved taking into account tight constraints in terms of cost, performance, power and time to market. With standards and regulations (e.g., ISO-26262, DO-254, IEC-61508) clearly specify the targets to be achieved and the methods to prove their achievement, techniques working at system level are particularly attracting. On the other hand, Field Programmable Gate Array (FPGA) devices are becoming more and more attractive, also in safety- and mission-critical applications due to the high performance, low power consumption and the flexibility for reconfiguration they provide. Two types of FPGAs are commonly used, based on their configuration memory cell technology, i.e., SRAM-based and Flash-based FPGA. For SRAM-based FPGAs, the SRAM cells of the configuration memory highly susceptible to radiation induced effects which can leads to system failure; and for Flash-based FPGAs, even though their non-volatile configuration memory cells are almost immune to Single Event Upsets induced by energetic particles, the floating gate switches and the logic cells in the configuration tiles can still suffer from Single Event Effects when hit by an highly charged particle. So analysis and mitigation techniques for Single Event Effects on FPGAs are becoming increasingly important in the design flow especially when reliability is one of the main requirements

SRAM-Based FPGA Systems for Safety-Critical Applications: A Survey on Design Standards and Proposed Methodologies

As the ASIC design cost becomes affordable only for very large-scale productions, the FPGA technology is currently becoming the leading technology for those applications that require a small-scale production. FPGAs can be considered as a technology crossing between hardware and software. Only a small-number of standards for the design of safety-critical systems give guidelines and recommendations that take the peculiarities of the FPGA technology into consideration. The main contribution of this paper is an overview of the existing design standards that regulate the design and verification of FPGA-based systems in safety-critical application fields. Moreover, the paper proposes a survey of significant published research proposals and existing industrial guidelines about the topic, and collects and reports about some lessons learned from industrial and research projects involving the use of FPGA devices

Using Fine Grain Approaches for highly reliable Design of FPGA-based Systems in Space

Nowadays using SRAM based FPGAs in space missions is increasingly considered due to their flexibility and reprogrammability. A challenge is the devices sensitivity to radiation effects that increased with modern architectures due to smaller CMOS structures. This work proposes fault tolerance methodologies, that are based on a fine grain view to modern reconfigurable architectures. The focus is on SEU mitigation challenges in SRAM based FPGAs which can result in crucial situations

Low-Level Placement and Routing Changes to Increase SRAM FPGA Reliability

Mitigation techniques, such as TMR, are used to reduce the negative effects of radiation on FPGAs deployed in space environments. While these techniques increase the robustness of the device, there is still room for improvement in the range of 100 to 1,000x. These improvements can be realized through the low-level implementation of the placement and routing on the device. This work has implemented a wide variety of techniques to realize these gains, achieving an overall improvement of 45,653x through fault-injection testing and an improvement of 368x in radiation testing

Voter Insertion Techniques for Fault Tolerant FPGA Design

Triple Modular Redundancy (TMR) is a common reliability technique for FPGA designs used in radiation environments. TMR consists of triplicating a design and inserting voters to mask errors using redundancy. This paper will investigate the automatic placement of voters in TMR designs. In particular, it will introduce three algorithms for determining where to insert synchronization voters and compare the area and timing impact of these algorithms on FPGA designs. It will be shown that the placement of synchronization voters in a triplicated design can have an important impact on the area and timing characteristics of the resulting design. The algorithms presented in this paper give results that increase the critical path length of a design when adding TMR voters by as little as 3% to as much as 50%