Oblivious Handshakes and Sharing of Secrets of Privacy-Preserving Matching and Authentication Protocols

The objective of this research is focused on two of the most important privacy-preserving techniques: privacy-preserving element matching protocols and privacy-preserving credential authentication protocols, where an element represents the information generated by users themselves and a credential represents a group membership assigned from an independent central authority (CA). The former is also known as private set intersection (PSI) protocol and the latter is also known as secret handshake (SH) protocol. In this dissertation, I present a general framework for design of efficient and secure PSI and SH protocols based on similar message exchange and computing procedures to confirm “commonality” of their exchanged information, while protecting the information from each other when the commonalty test fails. I propose to use the homomorphic randomization function (HRF) to meet the privacy-preserving requirements, i.e., common element/credential can be computed efficiently based on homomorphism of the function and uncommon element/credential are difficult to derive because of the randomization of the same function. Based on the general framework two new PSI protocols with linear computing and communication cost are proposed. The first protocol uses full homomorphic randomization function as the cryptographic basis and the second one uses partial homomorphic randomization function. Both of them achieve element confidentiality and private set intersection. A new SH protocol is also designed based on the framework, which achieves unlinkability with a reusable pair of credential and pseudonym and least number of bilinear mapping operations. I also propose to interlock the proposed PSI protocols and SH protocol to design new protocols with new security properties. When a PSI protocol is executed first and the matched elements are associated with the credentials in a following SH protocol, authenticity is guaranteed on matched elements. When a SH protocol is executed first and the verified credentials is used in a following PSI protocol, detection resistance and impersonation attack resistance are guaranteed on matching elements. The proposed PSI and SH protocols are implemented to provide privacy-preserving inquiry matching service (PPIM) for social networking applications and privacy-preserving correlation service (PAC) of network security alerts. PPIM allows online social consumers to find partners with matched inquiries and verified group memberships without exposing any information to unmatched parties. PAC allows independent network alert sources to find the common alerts without unveiling their local network information to each other

Ubiquitous Computing

The aim of this book is to give a treatment of the actively developed domain of Ubiquitous computing. Originally proposed by Mark D. Weiser, the concept of Ubiquitous computing enables a real-time global sensing, context-aware informational retrieval, multi-modal interaction with the user and enhanced visualization capabilities. In effect, Ubiquitous computing environments give extremely new and futuristic abilities to look at and interact with our habitat at any time and from anywhere. In that domain, researchers are confronted with many foundational, technological and engineering issues which were not known before. Detailed cross-disciplinary coverage of these issues is really needed today for further progress and widening of application range. This book collects twelve original works of researchers from eleven countries, which are clustered into four sections: Foundations, Security and Privacy, Integration and Middleware, Practical Applications

Radio Frequency Identification Technology: Applications, Technical Challenges and Strategies

Purpose - The purpose of this paper is to discuss the technology behind RFID systems, identify the applications of RFID in various industries, and discuss the technical challenges of RFID implementation and the corresponding strategies to overcome those challenges. Design/methodology/approach - Comprehensive literature review and integration of the findings from literature. Findings - Technical challenges of RFID implementation include tag cost, standards, tag and reader selection, data management, systems integration and security. The corresponding solution is suggested for each challenge. Research limitations/implications - A survey type research is needed to validate the results. Practical implications - This research offers useful technical guidance for companies which plan to implement RFID and we expect it to provide the motivation for much future research in this area. Originality/value - As the infancy of RFID applications, few researches have existed to address the technical issues of RFID implementation. Our research filled this gap

Supporting the Design of Privacy-Aware Business Processes via Privacy Process Patterns

Privacy is an increasingly important concern for modern software systems which handle personal and sensitive user information. Privacy by design has been established in order to highlight the path to be followed during a system’s design phase ensuring the appropriate level of privacy for the information it handles. Nonetheless, transitioning between privacy concerns identified early during the system’s design phase, and privacy implementing technologies to satisfy such concerns at the later development stages, remains a challenge. In order to overcome this issue, mainly caused by the lack of privacy-related expertise of software systems engineers, this work proposes a series of privacy process patterns. The proposed patterns encapsulate expert knowledge and provide predefined solutions for the satisfaction of different types of privacy concerns. The patterns presented in this work are used as a component of an existing privacy-aware system design methodology, through which they are applied to a real life system

Feature-based generation of pervasive systems architectures utilizing software product line concepts

As the need for pervasive systems tends to increase and to dominate the computing discipline, software engineering approaches must evolve at a similar pace to facilitate the construction of such systems in an efficient manner. In this thesis, we provide a vision of a framework that will help in the construction of software product lines for pervasive systems by devising an approach to automatically generate architectures for this domain. Using this framework, designers of pervasive systems will be able to select a set of desired system features, and the framework will automatically generate architectures that support the presence of these features. Our approach will not compromise the quality of the architecture especially as we have verified that by comparing the generated architectures to those manually designed by human architects. As an initial step, and in order to determine the most commonly required features that comprise the widely most known pervasive systems, we surveyed more than fifty existing architectures for pervasive systems in various domains. We captured the most essential features along with the commonalities and variabilities between them. The features were categorized according to the domain and the environment that they target. Those categories are: General pervasive systems, domain-specific, privacy, bridging, fault-tolerance and context-awareness. We coupled the identified features with well-designed components, and connected the components based on the initial features selected by a system designer to generate an architecture. We evaluated our generated architectures against architectures designed by human architects. When metrics such as coupling, cohesion, complexity, reusability, adaptability, modularity, modifiability, packing density, and average interaction density were used to test our framework, our generated architectures were found comparable, if not better than the human generated architectures

SECURITY, PRIVACY AND APPLICATIONS IN VEHICULAR AD HOC NETWORKS

With wireless vehicular communications, Vehicular Ad Hoc Networks (VANETs) enable numerous applications to enhance traffic safety, traffic efficiency, and driving experience. However, VANETs also impose severe security and privacy challenges which need to be thoroughly investigated. In this dissertation, we enhance the security, privacy, and applications of VANETs, by 1) designing application-driven security and privacy solutions for VANETs, and 2) designing appealing VANET applications with proper security and privacy assurance. First, the security and privacy challenges of VANETs with most application significance are identified and thoroughly investigated. With both theoretical novelty and realistic considerations, these security and privacy schemes are especially appealing to VANETs. Specifically, multi-hop communications in VANETs suffer from packet dropping, packet tampering, and communication failures which have not been satisfyingly tackled in literature. Thus, a lightweight reliable and faithful data packet relaying framework (LEAPER) is proposed to ensure reliable and trustworthy multi-hop communications by enhancing the cooperation of neighboring nodes. Message verification, including both content and signature verification, generally is computation-extensive and incurs severe scalability issues to each node. The resource-aware message verification (RAMV) scheme is proposed to ensure resource-aware, secure, and application-friendly message verification in VANETs. On the other hand, to make VANETs acceptable to the privacy-sensitive users, the identity and location privacy of each node should be properly protected. To this end, a joint privacy and reputation assurance (JPRA) scheme is proposed to synergistically support privacy protection and reputation management by reconciling their inherent conflicting requirements. Besides, the privacy implications of short-time certificates are thoroughly investigated in a short-time certificates-based privacy protection (STCP2) scheme, to make privacy protection in VANETs feasible with short-time certificates. Secondly, three novel solutions, namely VANET-based ambient ad dissemination (VAAD), general-purpose automatic survey (GPAS), and VehicleView, are proposed to support the appealing value-added applications based on VANETs. These solutions all follow practical application models, and an incentive-centered architecture is proposed for each solution to balance the conflicting requirements of the involved entities. Besides, the critical security and privacy challenges of these applications are investigated and addressed with novel solutions. Thus, with proper security and privacy assurance, these solutions show great application significance and economic potentials to VANETs. Thus, by enhancing the security, privacy, and applications of VANETs, this dissertation fills the gap between the existing theoretic research and the realistic implementation of VANETs, facilitating the realistic deployment of VANETs

Oblivious Handshakes and Sharing of Secrets of Privacy-Preserving Matching and Authentication Protocols

The objective of this research is focused on two of the most important privacy-preserving techniques: privacy-preserving element matching protocols and privacy-preserving credential authentication protocols, where an element represents the information generated by users themselves and a credential represents a group membership assigned from an independent central authority (CA). The former is also known as private set intersection (PSI) protocol and the latter is also known as secret handshake (SH) protocol. In this dissertation, I present a general framework for design of efficient and secure PSI and SH protocols based on similar message exchange and computing procedures to confirm “commonality” of their exchanged information, while protecting the information from each other when the commonalty test fails. I propose to use the homomorphic randomization function (HRF) to meet the privacy-preserving requirements, i.e., common element/credential can be computed efficiently based on homomorphism of the function and uncommon element/credential are difficult to derive because of the randomization of the same function. Based on the general framework two new PSI protocols with linear computing and communication cost are proposed. The first protocol uses full homomorphic randomization function as the cryptographic basis and the second one uses partial homomorphic randomization function. Both of them achieve element confidentiality and private set intersection. A new SH protocol is also designed based on the framework, which achieves unlinkability with a reusable pair of credential and pseudonym and least number of bilinear mapping operations. I also propose to interlock the proposed PSI protocols and SH protocol to design new protocols with new security properties. When a PSI protocol is executed first and the matched elements are associated with the credentials in a following SH protocol, authenticity is guaranteed on matched elements. When a SH protocol is executed first and the verified credentials is used in a following PSI protocol, detection resistance and impersonation attack resistance are guaranteed on matching elements. The proposed PSI and SH protocols are implemented to provide privacy-preserving inquiry matching service (PPIM) for social networking applications and privacy-preserving correlation service (PAC) of network security alerts. PPIM allows online social consumers to find partners with matched inquiries and verified group memberships without exposing any information to unmatched parties. PAC allows independent network alert sources to find the common alerts without unveiling their local network information to each other

Towards a Framework for Preserving Privacy in VANET

Vehicular Ad-hoc Network (VANET) is envisioned as an integral part of the Intelligent Transportation Systems as it promises various services and benefits such as road safety, traffic efficiency, navigation and infotainment services. However, the security and privacy risks associated with the wireless communication are often overlooked. Messages exchanged in VANET wireless communication carry inferable Personally Identifiable Information(PII). This introduces several privacy threats that could limit the adoption of VANET. The quantification of these privacy threats is an active research area in VANET security and privacy domains. The Pseudonymisation technique is currently the most preferred solution for critical privacy threats in VANET to provide conditional anonymous authentication. In the existing literature, several Pseudonym Changing Schemes(PCS) have been proposed as effective de-identification approaches to prevent the inference of PII. However, for various reasons, none of the proposed schemes received public acceptance. Moreover, one of the open research challenges is to compare different PCSs under varying circumstances with a set of standardized experimenting parameters and consistent metrics. In this research, we propose a framework to assess the effectiveness of PCSs in VANET with a systematic approach. This comprehensive equitable framework consists of a variety of building blocks which are segmented into correlated sub-domains named Mobility Models, Adversary Models, and Privacy Metrics. Our research introduces a standard methodology to evaluate and compare VANET PCSs using a generic simulation setup to obtain optimal, realistic and most importantly, consistent results. This road map for the simulation setup aims to help the research \& development community to develop, assess and compare the PCS with standard set of parameters for proper analysis and reporting of new PCSs. The assessment of PCS should not only be equitable but also realistic and feasible. Therefore, the sub-domains of the framework need coherent as well as practically applicable characteristics. The Mobility Model is the layout of the traffic on the road which has varying features such as traffic density and traffic scenarios based on the geographical maps. A diverse range of Adversary Models is important for pragmatic evaluation of the PCSs which not only considers the presence of global passive adversary but also observes the effect of intelligent and strategic \u27local attacker\u27 placements. The biggest challenge in privacy measurement is the fact that it is a context-based evaluation. In the literature, the PCSs are evaluated using either user-oriented or adversary-oriented metrics. Under all circumstances, the PCSs should be assessed from both user and adversary perspectives. Using this framework, we determined that a local passive adversary can be strong based on the attacking capabilities. Therefore, we propose two intelligent adversary placements which help in privacy assessment with realistic adversary modelling. When the existing PCSs are assessed with our systematic approach, consistent models and metrics, we identified the privacy vulnerabilities and the limitations of existing PCSs. There was a need for comprehensive PCS which consider the context of the vehicles and the changing traffic patterns in the neighbourhood. Consequently, we developed a Context-Aware \& Traffic Based PCS that focuses on increasing the overall rate of confusion for the adversary and to reduce deterministic information regarding the pseudonym change. It is achieved by increasing the number of dynamic attributes in the proposed PCS for inference of the changing pattern of the pseudonyms. The PCS increases the anonymity of the vehicle by having the synchronized pseudonym changes. The details given under the sub-domains of the framework solidifies our findings to strengthen the privacy assessment of our proposed PCS