Wavelength reconfigurability for next generation optical access networks

Next generation optical access networks should not only increase the capacity but also be able to redistribute the capacity on the fly in order to manage larger variations in traffic patterns. Wavelength reconfigurability is the instrument to enable such capability of network-wide bandwidth redistribution since it allows dynamic sharing of both wavelengths and timeslots in WDM-TDM optical access networks. However, reconfigurability typically requires tunable lasers and tunable filters at the user side, resulting in cost-prohibitive optical network units (ONU). In this dissertation, I propose a novel concept named cyclic-linked flexibility to address the cost-prohibitive problem. By using the cyclic-linked flexibility, the ONU needs to switch only within a subset of two pre-planned wavelengths, however, the cyclic-linked structure of wavelengths allows free bandwidth to be shifted to any wavelength by a rearrangement process. Rearrangement algorithm are developed to demonstrate that the cyclic-linked flexibility performs close to the fully flexible network in terms of blocking probability, packet delay, and packet loss. Furthermore, the evaluation shows that the rearrangement process has a minimum impact to in-service ONUs. To realize the cyclic-linked flexibility, a family of four physical architectures is proposed. PRO-Access architecture is suitable for new deployments and disruptive upgrades in which the network reach is not longer than 20 km. WCL-Access architecture is suitable for metro-access merger with the reach up to 100 km. PSB-Access architecture is suitable to implement directly on power-splitter-based PON deployments, which allows coexistence with current technologies. The cyclically-linked protection architecture can be used with current and future PON standards when network protection is required

Otimização do fronthaul ótico para redes de acesso de rádio (baseadas) em computação em nuvem (CC-RANs)

Doutoramento conjunto (MAP-Tele) em Engenharia Eletrotécnica/TelecomunicaçõesA proliferação de diversos tipos de dispositivos moveis, aplicações e serviços com grande necessidade de largura de banda têm contribuído para o aumento de ligações de banda larga e ao aumento do volume de trafego das redes de telecomunicações moveis. Este aumento exponencial tem posto uma enorme pressão nos mobile operadores de redes móveis (MNOs). Um dos aspetos principais deste recente desenvolvimento, é a necessidade que as redes têm de oferecer baixa complexidade nas ligações, como também baixo consumo energético, muito baixa latência e ao mesmo tempo uma grande capacidade por baixo usto. De maneira a resolver estas questões, os MNOs têm focado a sua atenção na redes de acesso por rádio em nuvem (C-RAN) principalmente devido aos seus benefícios em termos de otimização de performance e relação qualidade preço. O standard para a distribuição de sinais sem fios por um fronthaul C-RAN é o common public radio interface (CPRI). No entanto, ligações óticas baseadas em interfaces CPRI necessitam de uma grande largura de banda. Estes requerimentos podem também ser atingidos com uma implementação em ligação free space optical (FSO) que é um sistema ótico que usa comunicação sem fios. O FSO tem sido uma alternativa muito apelativa aos sistemas de comunicação rádio (RF) pois combinam a flexibilidade e mobilidade das redes RF ao mesmo tempo que permitem a elevada largura de banda permitida pelo sistema ótico. No entanto, as ligações FSO são suscetíveis a alterações atmosféricas que podem prejudicar o desempenho do sistema de comunicação. Estas limitações têm evitado o FSO de ser tornar uma excelente solução para o fronthaul. Uma caracterização precisa do canal e tecnologias mais avançadas são então necessárias para uma implementação pratica de ligações FSO. Nesta tese, vamos estudar uma implementação eficiente para fronthaul baseada em tecnologia á rádio-sobre-FSO (RoFSO). Propomos expressões em forma fechada para mitigação das perdas de propagação e para a estimação da capacidade do canal de maneira a aliviar a complexidade do sistema de comunicação. Simulações numéricas são também apresentadas para formatos de modulação adaptativas. São também considerados esquemas como um sistema hibrido RF/FSO e tecnologias de transmissão apoiadas por retransmissores que ajudam a alivar os requerimentos impostos por um backhaul/fronthaul de C-RAN. Os modelos propostos não só reduzem o esforço computacional, como também têm outros méritos, tais como, uma elevada precisão na estimação do canal e desempenho, baixo requisitos na capacidade de memória e uma rápida e estável operação comparativamente com o estado da arte em sistemas analíticos (PON)-FSO. Este sistema é implementado num recetor em tempo real que é emulado através de uma field-programmable gate array (FPGA) comercial. Permitindo assim um sistema aberto, interoperabilidade, portabilidade e também obedecer a standards de software aberto. Os esquemas híbridos têm a habilidade de suportar diferentes aplicações, serviços e múltiplos operadores a partilharem a mesma infraestrutura de fibra ótica.The proliferation of different mobile devices, bandwidth-intensive applications and services contribute to the increase in the broadband connections and the volume of traffic on the mobile networks. This exponential growth has put considerable pressure on the mobile network operators (MNOs). In principal, there is a need for networks that not only offer low-complexity, low-energy consumption, and extremely low-latency but also high-capacity at relatively low cost. In order to address the demand, MNOs have given significant attention to the cloud radio access network (C-RAN) due to its beneficial features in terms of performance optimization and cost-effectiveness. The de facto standard for distributing wireless signal over the C-RAN fronthaul is the common public radio interface (CPRI). However, optical links based on CPRI interfaces requires large bandwidth. Also, the aforementioned requirements can be realized with the implementation of free space optical (FSO) link, which is an optical wireless system. The FSO is an appealing alternative to the radio frequency (RF) communication system that combines the flexibility and mobility offered by the RF networks with the high-data rates provided by the optical systems. However, the FSO links are susceptible to atmospheric impairments which eventually hinder the system performance. Consequently, these limitations prevent FSO from being an efficient standalone fronthaul solution. So, precise channel characterizations and advanced technologies are required for practical FSO link deployment and operation. In this thesis, we study an efficient fronthaul implementation that is based on radio-on-FSO (RoFSO) technologies. We propose closedform expressions for fading-mitigation and for the estimation of channel capacity so as to alleviate the system complexity. Numerical simulations are presented for adaptive modulation scheme using advanced modulation formats. We also consider schemes like hybrid RF/FSO and relay-assisted transmission technologies that can help in alleviating the stringent requirements by the C-RAN backhaul/fronthaul. The propose models not only reduce the computational requirements/efforts, but also have a number of diverse merits such as high-accuracy, low-memory requirements, fast and stable operation compared to the current state-of-the-art analytical based approaches. In addition to the FSO channel characterization, we present a proof-of-concept experiment in which we study the transmission capabilities of a hybrid passive optical network (PON)-FSO system. This is implemented with the real-time receiver that is emulated by a commercial field-programmable gate array (FPGA). This helps in facilitating an open system and hence enables interoperability, portability, and open software standards. The hybrid schemes have the ability to support different applications, services, and multiple operators over a shared optical fiber infrastructure

Enabling Technology in Optical Fiber Communications: From Device, System to Networking

This book explores the enabling technology in optical fiber communications. It focuses on the state-of-the-art advances from fundamental theories, devices, and subsystems to networking applications as well as future perspectives of optical fiber communications. The topics cover include integrated photonics, fiber optics, fiber and free-space optical communications, and optical networking

Optical Network Design, Modelling and Performance Evaluation for the Upgraded LHC at CERN

This thesis considers how advances in optical network and optoelectronic technologies may be utilised in particle physics applications. The research is carried out within a certain framework; CERN's Large Hadron Collider (LHC) upgrade. The focus is on the upgrade of the "last-tier" data links, those residing between the last information-processing stage and the accelerator. For that purpose, different network architectures, based on the Passive Optical Network (PON) architectural paradigm, are designed and evaluated. Firstly, a Time-Division Multiplexed (TDM) PON targeting timing, trigger and control applications is designed. The bi-directional, point-to-multipoint nature of the architecture leads to infrastructure efficiency increase. A custom protocol is developed and implemented using FPGAs. It is experimentally verified that the network design can deliver significantly higher data rate than the current infrastructure and meet the stringent latency requirements of the targeted application. Consequently, the design of a network that can be utilised to transmit all types of information at the upgraded LHC, the High-Luminosity LHC (HL-LHC) is discussed. The most challenging requirement is that of the high upstream data rate. As WDM offers virtual point-to-point connectivity, the possibility of using a Wavelength-Division Multiplexed (WDM) PON is theoretically investigated. The shortcomings of this solution are identified; these include high cost and complexity, therefore a simpler architecture is designed. This is also based on the PON paradigm and features the use of Reflective Electroabsorption Modulators (REAM) at the front-end (close to the particle collision point). Its performance is experimentally investigated and shown to meet the requirements of a unified architecture at the HL-LHC from a networking perspective. Finally, since the radiation resistance of optoelectronic components used at the front-end is of major importance, the REAM radiation hardness is experimentally investigated. Their radiation resistance limits are established, while new insights into the radiation damage mechanism are gained

Semiconductor Optical Amplifiers and mm-Wave Wireless Links for Converged Access Networks

Future access networks are converged optical-wireless networks, where fixed-line and wireless services share the same infrastructure. In this book, semiconductor optical amplifiers (SOA) and mm-wave wireless links are investigated, and their use in converged access networks is explored: SOAs compensate losses in the network, and thereby extend the network reach. Millimeter-wave wireless links substitute fiber links when cabling is not economical

Next generation passive optical networks based on orthogonal frequency division multiplexing techniques

In recent decades, the industry of communications has acquired huge significance, and nowadays constitutes an essential tool for the society information. Thus, the exponential growth in demand of broadband services and the increasing amount of information to be transmitted have spurred the evolution of the access network infrastructure to effectively meet the user needs in an effective way in terms of costs of both installation and maintenance. Passive optical networks (PON) are currently considered the most efficient and least costly alternative to deploy fiber to the home environment. In order to allow many users simultaneously coexist PONs based on time multiplexing (TDMA) have been developed. Looking ahead, however, it is expected that these techniques do not meet the requirements on access networks. In consequence, other multiple access techniques such as Wavelength Division Multiplexing Access (WDMA) or Orthogonal Frequency Division Multiplexing Access (OFDMA) are currently under study and development for use in the next generation of PONs. Particularly, in recent years OFDM has stood out among the scientific community to be considered a solution with great potential on future implementation of PONs. This is especially true due to the capacity of OFDM to work with multilevel modulations, its high tolerance to chromatic dispersion, and its high flexibility and granularity in terms of bandwidth management. Given the above, the aim of this Thesis is to study deeply the advantages and challenges of implementing the standard OFDM as an access network solution; likewise, it offers solutions to improve its performance. In order to evaluate the main structures and strategies for OFDM-based PON, a comparative analysis of all of them is performed firstly, highlighting their sensitivity levels, maximum range and number of users. A key aspect for network providers is the cost of operation, deployment and maintenance of networks. As a low-cost solution, this Thesis proposes a network model called Statistical-OFDMA-PON based on intensity modulation and direct detection. In addition, dynamic bandwidth management strategies are applied into this model getting an improvement in the power balance which in turn, allows to increase the maximum range and the scalability in number of users. One of the main OFDM problems is the Peak-to-Average Power Ratio (PAPR) which increases with the number of carriers. This thesis proposes a new algorithm based on folding the signal and transmitting auxiliary information in order to compensate the PAPR effect and thus increase the sensitivity of the optical system. On the other hand, OFDMA requires a large number of operations in the digital domain resulting in a high computational effort, which in turn results in an increased cost. For this reason, this Thesis presents a study on the optimization of the required resolution in the Digital-to-Analog / Analog-to-Digital Converters (DAC/ADCs) maintaining the transmission quality. The optimization of the computation time may make the OFDMA-based optical network more attractive for future PONs. Finally, another problem concerning the OFDM optical networks is their sensitivity to Phase Noise (PN). In this regard, this Thesis presents a study of the effect of the laser linewidth and its dependence on signal bandwidth. A mitigation technique based on pilot tones is implemented and the limiting values for the laser linewidth are found to be within the reach of present low-cost light sources.En estas últimas décadas, la industria de las comunicaciones ha adquirido gran importancia y hoy en día, constituye una herramienta imprescindible para el funcionamiento en la sociedad de la información. Así pues, el crecimiento exponencial en la demanda de servicios de banda ancha y la carga de información cada vez mayor que se necesita transmitir ha estimulado la evolución de las infraestructuras del tramo de acceso a la red para poder satisfacer las necesidades del usuario de forma efectiva en términos de costes de instalación y de mantenimiento. Las redes ópticas pasivas (Passive Optical Networks, PON) son actualmente consideradas la alternativa más eficiente y de menor coste para desplegar fibra hasta los hogares. Con el fin de permitir que muchos usuarios coexistan simultáneamente se han desarrollado PONs basadas en multiplexación en tiempo (Time Division Multiplexing Access, TDMA). De cara al futuro, sin embargo, se prevé que estas técnicas no permitan cubrir las exigencias sobre las redes de acceso. En consecuencia, otras técnicas de acceso múltiple al medio como el acceso múltiple por división de longitud de onda (Wavelength Division Multiplexing Access, WDMA) o el acceso múltiple por división de frecuencia ortogonal (Orthogonal Frequency Division Multiplexing Access, OFDMA) se encuentran actualmente en proceso de estudio y desarrollo para su uso en la futura generación de PONs. En concreto, en los últimos años OFDM se ha destacado entre la comunidad científica al considerarse una solución con gran potencial para su futura implantación en redes de acceso pasivas. Esto es especialmente cierto debido a la capacidad que el OFDM para trabajar con modulaciones multinivel, así como su alta tolerancia a la dispersión cromática y a la gran flexibilidad y granularidad que posibilita en términos de gestión del ancho de banda. Por todo lo anterior, el objetivo de esta Tesis es estudiar con profundidad las ventajas y los retos de aplicar el estándar OFDM como solución de red de acceso; del mismo modo, ofrece soluciones para mejorar su rendimiento. Con el objetivo de evaluar las principales estructuras basadas en OFDM-PON, en primer lugar se realiza un análisis comparativo de todas ellas destacando sus niveles de sensibilidad, máximo alcance y número de usuarios. Un aspecto fundamental para los proveedores de red es el coste de operación, despliegue y mantenimiento de las redes. Como solución de bajo coste, esta Tesis propone un modelo de red llamado Statistical-OFDMA-PON que se basa en modulación de intensidad y detección directa. Además, este modelo se completa con estrategias de gestión dinámica del ancho de banda de los usuarios que conforman la estructura de red propuesta consiguiendo una mejora en el balance de potencias que permite aumentar distancia y número de usuarios. Uno de los principales problemas del OFDM es el alto nivel de la relación de potencia de pico a potencia media (Peak-to-Average Power Ratio, PAPR) creciente con el número de portadoras. Esta Tesis propone un nuevo algoritmo basado en el pliegue de la señal y la transmisión de información auxiliar para compensar el efecto del PAPR aumentando así la sensibilidad del sistema óptico. Por otro lado, OFDMA requiere un número elevado de operaciones en el dominio digital resultando en un alto esfuerzo computacional que a su vez se traduce en un aumento del coste. Por esta razón, esta Tesis presenta un estudio sobre la optimización de la resolución requerida en los conversores analógicodigital (Digital-to-Analog/Analog-to-Digital Converters, DAC/ADCs) manteniendo la calidad de transmisión. La optimización del tiempo de cómputo requerido puede dotar de un mayor atractivo la solución de red óptica basada en OFDMA. Finalmente, otro de los problemas que presentan las redes ópticas OFDM es su sensibilidad frente al ruido de fase (Phase Noise, PN). En este aspecto, esta Tesis presenta un estudio del efecto del ancho de línea del láser y su dependencia con el ancho de banda de la señal. Técnicas de mitigación basadas en tonos piloto han sido implementadas y se han encontrado los valores limitantes del ancho de línea dentro del alcance de los láseres de bajo coste