Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Reliability-aware memory design using advanced reconfiguration mechanisms

Fast and Complex Data Memory systems has become a necessity in modern computational units in today's integrated circuits. These memory systems are integrated in form of large embedded memory for data manipulation and storage. This goal has been achieved by the aggressive scaling of transistor dimensions to few nanometer (nm) sizes, though; such a progress comes with a drawback, making it critical to obtain high yields of the chips. Process variability, due to manufacturing imperfections, along with temporal aging, mainly induced by higher electric fields and temperature, are two of the more significant threats that can no longer be ignored in nano-scale embedded memory circuits, and can have high impact on their robustness. Static Random Access Memory (SRAM) is one of the most used embedded memories; generally implemented with the smallest device dimensions and therefore its robustness can be highly important in nanometer domain design paradigm. Their reliable operation needs to be considered and achieved both in cell and also in architectural SRAM array design. Recently, and with the approach to near/below 10nm design generations, novel non-FET devices such as Memristors are attracting high attention as a possible candidate to replace the conventional memory technologies. In spite of their favorable characteristics such as being low power and highly scalable, they also suffer with reliability challenges, such as process variability and endurance degradation, which needs to be mitigated at device and architectural level. This thesis work tackles such problem of reliability concerns in memories by utilizing advanced reconfiguration techniques. In both SRAM arrays and Memristive crossbar memories novel reconfiguration strategies are considered and analyzed, which can extend the memory lifetime. These techniques include monitoring circuits to check the reliability status of the memory units, and architectural implementations in order to reconfigure the memory system to a more reliable configuration before a fail happens.Actualmente, el diseño de sistemas de memoria en circuitos integrados busca continuamente que sean más rápidos y complejos, lo cual se ha vuelto de gran necesidad para las unidades de computación modernas. Estos sistemas de memoria están integrados en forma de memoria embebida para una mejor manipulación de los datos y de su almacenamiento. Dicho objetivo ha sido conseguido gracias al agresivo escalado de las dimensiones del transistor, el cual está llegando a las dimensiones nanométricas. Ahora bien, tal progreso ha conllevado el inconveniente de una menor fiabilidad, dado que ha sido altamente difícil obtener elevados rendimientos de los chips. La variabilidad de proceso - debido a las imperfecciones de fabricación - junto con la degradación de los dispositivos - principalmente inducido por el elevado campo eléctrico y altas temperaturas - son dos de las más relevantes amenazas que no pueden ni deben ser ignoradas por más tiempo en los circuitos embebidos de memoria, echo que puede tener un elevado impacto en su robusteza final. Static Random Access Memory (SRAM) es una de las celdas de memoria más utilizadas en la actualidad. Generalmente, estas celdas son implementadas con las menores dimensiones de dispositivos, lo que conlleva que el estudio de su robusteza es de gran relevancia en el actual paradigma de diseño en el rango nanométrico. La fiabilidad de sus operaciones necesita ser considerada y conseguida tanto a nivel de celda de memoria como en el diseño de arquitecturas complejas basadas en celdas de memoria SRAM. Actualmente, con el diseño de sistemas basados en dispositivos de 10nm, dispositivos nuevos no-FET tales como los memristores están atrayendo una elevada atención como posibles candidatos para reemplazar las actuales tecnologías de memorias convencionales. A pesar de sus características favorables, tales como el bajo consumo como la alta escabilidad, ellos también padecen de relevantes retos de fiabilidad, como son la variabilidad de proceso y la degradación de la resistencia, la cual necesita ser mitigada tanto a nivel de dispositivo como a nivel arquitectural. Con todo esto, esta tesis doctoral afronta tales problemas de fiabilidad en memorias mediante la utilización de técnicas de reconfiguración avanzada. La consideración de nuevas estrategias de reconfiguración han resultado ser validas tanto para las memorias basadas en celdas SRAM como en `memristive crossbar¿, donde se ha observado una mejora significativa del tiempo de vida en ambos casos. Estas técnicas incluyen circuitos de monitorización para comprobar la fiabilidad de las unidades de memoria, y la implementación arquitectural con el objetivo de reconfigurar los sistemas de memoria hacia una configuración mucho más fiables antes de que el fallo suced

MANAGING AND LEVERAGING VARIATIONS AND NOISE IN NANOMETER CMOS

Advanced CMOS technologies have enabled high density designs at the cost of complex fabrication process. Variation in oxide thickness and Random Dopant Fluctuation (RDF) lead to variation in transistor threshold voltage Vth. Current photo-lithography process used for printing decreasing critical dimensions result in variation in transistor channel length and width. A related challenge in nanometer CMOS is that of on-chip random noise. With decreasing threshold voltage and operating voltage; and increasing operating temperature, CMOS devices are more sensitive to random on-chip noise in advanced technologies. In this thesis, we explore novel circuit techniques to manage the impact of process variation in nanometer CMOS technologies. We also analyze the impact of on-chip noise on CMOS circuits and propose techniques to leverage or manage impact of noise based on the application. True Random Number Generator (TRNG) is an interesting cryptographic primitive that leverages on-chip noise to generate random bits; however, it is highly sensitive to process variation. We explore novel metastability circuits to alleviate the impact of variations and at the same time leverage on-chip noise sources like Random Thermal Noise and Random Telegraph Noise (RTN) to generate high quality random bits. We develop stochastic models for metastability based TRNG circuits to analyze the impact of variation and noise. The stochastic models are used to analyze and compare low power, energy efficient and lightweight post-processing techniques targeted to low power applications like System on Chip (SoC) and RFID. We also propose variation aware circuit calibration techniques to increase reliability. We extended this technique to a more generic application of designing Post-Si Tunable (PST) clock buffers to increase parametric yield in the presence of process variation. Apart from one time variation due to fabrication process, transistors undergo constant change in threshold voltage due to aging/wear-out effects and RTN. Process variation affects conventional sensors and introduces inaccuracies during measurement. We present a lightweight wear-out sensor that is tolerant to process variation and provides a fine grained wear-out sensing. A similar circuit is designed to sense fluctuation in transistor threshold voltage due to RTN. Although thermal noise and RTN are leveraged in applications like TRNG, they affect the stability of sensitive circuits like Static Random Access Memory (SRAM). We analyze the impact of on-chip noise on Bit Error Rate (BER) and post-Si test coverage of SRAM cells

Design for prognostics and security in field programmable gate arrays (FPGAs).

There is an evolutionary progression of Field Programmable Gate Arrays (FPGAs) toward more complex and high power density architectures such as Systems-on- Chip (SoC) and Adaptive Compute Acceleration Platforms (ACAP). Primarily, this is attributable to the continual transistor miniaturisation and more innovative and efficient IC manufacturing processes. Concurrently, degradation mechanism of Bias Temperature Instability (BTI) has become more pronounced with respect to its ageing impact. It could weaken the reliability of VLSI devices, FPGAs in particular due to their run-time reconfigurability. At the same time, vulnerability of FPGAs to device-level attacks in the increasing cyber and hardware threat environment is also quadrupling as the susceptible reliability realm opens door for the rogue elements to intervene. Insertion of highly stealthy and malicious circuitry, called hardware Trojans, in FPGAs is one of such malicious interventions. On the one hand where such attacks/interventions adversely affect the security ambit of these devices, they also undermine their reliability substantially. Hitherto, the security and reliability are treated as two separate entities impacting the FPGA health. This has resulted in fragmented solutions that do not reflect the true state of the FPGA operational and functional readiness, thereby making them even more prone to hardware attacks. The recent episodes of Spectre and Meltdown vulnerabilities are some of the key examples. This research addresses these concerns by adopting an integrated approach and investigating the FPGA security and reliability as two inter-dependent entities with an additional dimension of health estimation/ prognostics. The design and implementation of a small footprint frequency and threshold voltage-shift detection sensor, a novel hardware Trojan, and an online transistor dynamic scaling circuitry present a viable FPGA security scheme that helps build a strong microarchitectural level defence against unscrupulous hardware attacks. Augmented with an efficient Kernel-based learning technique for FPGA health estimation/prognostics, the optimal integrated solution proves to be more dependable and trustworthy than the prevalent disjointed approach.Samie, Mohammad (Associate)PhD in Transport System

Experimental Characterization of Random Telegraph Noise and Hot Carrier Aging of Nano-scale MOSFETs

One of the emerging challenges in the scaling of MOSFETs is the reliability of ultra-thin gate dielectrics. Various sources can cause device aging, such as hot carrier aging (HCA), negative bias temperature instability (NBTI), positive bias temperature instability (PBTI), and time dependent device breakdown (TDDB). Among them, hot carrier aging (HCA) has attracted much attention recently, because it is limiting the device lifetime. As the channel length of MOSFETs becomes smaller, the lateral electrical field increases and charge carriers become sufficiently energetic (“hot”) to cause damage to the device when they travel through the space charge region near the drain. Unlike aging that causes device parameters, such as threshold voltage, to drift in one direction, nano-scale devices also suffer from Random Telegraph Noise (RTN), where the current can fluctuate under fixed biases. RTN is caused by capturing/emitting charge carriers from/to the conduction channel. As the device sizes are reduced to the nano-meters, a single trap can cause substantial fluctuation in the current and threshold voltage. Although early works on HCA and RTN have improved the understanding, many issues remain unresolved and the aim of this project is to address these issues. The project is broadly divided into three parts: (i) an investigation on the HCA kinetics and how to predict HCA-induced device lifetime, (ii) a study of the interaction between HCA and RTN, and (iii) developing a new technique for directly measuring the RTN-induced jitter in the threshold voltage. To predict the device lifetime, a reliable aging kinetics is indispensable. Although early works show that HCA follows a power law, there are uncertainties in the extraction of the time exponent, making the prediction doubtful. A systematic experimental investigation was carried out in Chapter 4 and both the stress conditions and measurement parameters were carefully selected. It was found that the forward saturation current, commonly used in early work for monitoring HCA, leads to an overestimation of time exponents, because part of the damaged region is screened off by the space charges near the drain. Another source of errors comes from the inclusion of as-grown defects in the aging kinetics, which is not caused by aging. This leads to an underestimation of the time exponent. After correcting these errors, a reliable HCA kinetics is established and its predictive capability is demonstrated. There is confusion on how HCA and RTN interact and this is researched into in Chapter 5. The results show that for a device of average RTN, HCA only has a modest impact on RTN. RTN can either increase or decrease after HCA, depending on whether the local current under the RTN traps is rising or reducing. For a device of abnormally high RTN, RTN reduces substantially after HCA and the mechanism for this reduction is explored. The RTN-induced threshold voltage jitter, ∆Vth, is difficult to measure, as it is typically small and highly dynamic. Early works estimate this ∆Vth from the change in drain current and the accuracy of this estimation is not known. Chapter 6 focuses on developing a new ‘Trigger-When-Charged’ technique for directly measuring the RTN-induced ∆Vth. It will be shown that early works overestimate ∆Vth by a factor of two and the origin of this overestimation is investigated. This thesis consists of seven chapters. Chapter 1 introduces the project and its objectives. A literature review is given in Chapter 2. Chapter 3 covers the test facilities, measurement techniques, and devices used in this project. The main experimental results and analysis are given in Chapters 4-6, as described above. Finally, Chapter 7 concludes the project and discusses future works

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Thermal Management for Dependable On-Chip Systems

This thesis addresses the dependability issues in on-chip systems from a thermal perspective. This includes an explanation and analysis of models to show the relationship between dependability and tempature. Additionally, multiple novel methods for on-chip thermal management are introduced aiming to optimize thermal properties. Analysis of the methods is done through simulation and through infrared thermal camera measurements

Bias Temperature Instability of MOSFETs: Physical Processes, Models, and Prediction

CMOS technology dominates the semiconductor industry, and the reliability of MOSFETs is a key issue. To optimize chip design, trade-offs between reliability, speed, power consumption, and cost must be carried out. This requires modeling and prediction of device instability, and a major source of instability is device aging, where defects gradually build up and eventually cause malfunction of circuits. This paper first gives an overview of the major aging processes and discusses their relative importance as CMOS technology developed. Attentions are then focused on the negative and positive bias temperature instabilities (NBTI and PBTI), mainly based on the early works of the authors. The aim is to present the As-grown-Generation (AG) model, which can be used not only to fit the test data but also to predict long-term BTI at low biases. The model is based on an in-depth understanding of the different types of defects and the experimental separation of their contributions to BTI. The new measurement techniques developed to enable this separation are reviewed. The physical processes responsible for BTI are explored, and the reasons for the failure of the early models in predicting BTI are discussed

Insulators for 2D nanoelectronics: the gap to bridge

Nanoelectronic devices based on 2D materials are far from delivering their full theoretical performance potential due to the lack of scalable insulators. Amorphous oxides that work well in silicon technology have ill-defined interfaces with 2D materials and numerous defects, while 2D hexagonal boron nitride does not meet required dielectric specifications. The list of suitable alternative insulators is currently very limited. Thus, a radically different mindset with respect to suitable insulators for 2D technologies may be required. We review possible solution scenarios like the creation of clean interfaces, production of native oxides from 2D semiconductors and more intensive studies on crystalline insulators

Insulators for 2D nanoelectronics: the gap to bridge

Nanoelectronic devices based on 2D materials are far from delivering their full theoretical performance potential due to the lack of scalable insulators. Amorphous oxides that work well in silicon technology have ill-defined interfaces with 2D materials and numerous defects, while 2D hexagonal boron nitride does not meet required dielectric specifications. The list of suitable alternative insulators is currently very limited. Thus, a radically different mindset with respect to suitable insulators for 2D technologies may be required. We review possible solution scenarios like the creation of clean interfaces, production of native oxides from 2D semiconductors and more intensive studies on crystalline insulators