G.729 Error Recovery for Internet Telephony

This memorandum discusses the use of the ITU G.729 CS-ACELP speech coder on the Internet for telephony applications. In particular, the memo explores issues of error resiliency and recovery. In particular, the paper considers two questions. First, given N consecutive frame erasures (due to packet losses), how long does the decoder take to resynchronize its state with the encoder? What is the strength of the resulting error signal, both in terms of objective and subjective measures? The second issue explores which particular factors contribute to the strength of the error signal: the distortion of the speech due to the incorrect concealment of the erasures, or the subsequent distortion due to the loss of state synchronization, even though correct packets are being received. Both objective and subjective measures are used to characterize the importance of each of these two factors

Applications of analysis and synthesis techniques for complex sounds

Master'sMASTER OF SCIENC

Application of short time energy analysis in monitoring the stability of arc sound signal

This paper employed the short time energy of arc sound signals to online quantitatively describe the stability of arc sound signal. At first the signal can be preprocessed by wavelet packet filtering and then detailed information of the short time energy of the signal was obtained using hamming window. After statistical analyzed the short time energy the energy distribution possibility and cumulative distribution function of the signal can be collected. Then a proposed stability evaluation criterion was employed to quantitatively describe the stability of arc sound signal. Relative experimental data showed that more stable signal corresponded lager value of the criterion. The proposed method which combined the short time energy and statistical analysis was supported by many actual experiments. This contribution can benefit the quantitative evaluation of the arc welding process and instructed the future parameters optimization to obtain welding products with high quality. (C) 2017 Elsevier Ltd. All rights reserved

Signal Reconstruction From Nonuniform Samples Using Prolate Spheroidal Wave Functions: Theory and Application

Nonuniform sampling occurs in many applications due to imperfect sensors, mismatchedclocks or event-triggered phenomena. Indeed, natural images, biomedical responses andsensor network transmission have bursty structure so in order to obtain samples that correspondto the information content of the signal, one needs to collect more samples when thesignal changes fast and fewer samples otherwise which creates nonuniformly distibuted samples.On the other hand, with the advancements in the integrated circuit technology, smallscale and ultra low-power devices are available for several applications ranging from invasivebiomedical implants to environmental monitoring. However the advancements in the devicetechnologies also require data acquisition methods to be changed from the uniform (clockbased, synchronous) to nonuniform (clockless, asynchronous) processing. An important advancementis in the data reconstruction theorems from sub-Nyquist rate samples which wasrecently introduced as compressive sensing and that redenes the uncertainty principle. Inthis dissertation, we considered the problem of signal reconstruction from nonuniform samples.Our method is based on the Prolate Spheroidal Wave Functions (PSWF) which can beused in the reconstruction of time-limited and essentially band-limited signals from missingsamples, in event-driven sampling and in the case of asynchronous sigma delta modulation.We provide an implementable, general reconstruction framework for the issues relatedto reduction in the number of samples and estimation of nonuniform sample times. We alsoprovide a reconstruction method for level crossing sampling with regularization. Another way is to use projection onto convex sets (POCS) method. In this method we combinea time-frequency approach with the POCS iterative method and use PSWF for the reconstructionwhen there are missing samples. Additionally, we realize time decoding modulationfor an asynchronous sigma delta modulator which has potential applications in low-powerbiomedical implants

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Signal Processing in Wireless Communications: Device Fingerprinting and Wide-Band Interference Rejection

The rapid progress of wireless communication technologies that has taken place in recent years has significantly improved the quality of everyday life. However with this expansion of wireless communication systems come significant security threats and significant technological challenges, both of which are due to the fact that the communication medium is shared. The ubiquity of open wireless Internet access networks creates a new avenue for cyber-criminals to impersonate and act in an unauthorized way. The increasing number of deployed wide-band wireless communication systems entails technological challenges for effective utilization of the shared medium, which implies the need for advanced interference rejection methods. Wireless security and interference rejection in wide-band wireless communications are therefore often considered as the two main challenges in wireless network\u27s design and research. Important aspects of these challenges are illuminated and addressed in this dissertation. This dissertation considers signal processing approaches for exploiting or mitigating the effects of non-ideal components in wireless communication systems. In the first part of the dissertation, we introduce and study a novel, model-based approach to wireless device identification that exploits imperfections in the transmitter caused by manufacturing process nonidealities. Previous approaches to device identification based on hardware imperfections vary from transient analysis to machine learning but have not provided verifiable accuracy. Here, we detail a model-based approach, that uses statistical models of RF transmitter components: digital-to-analog converter, power amplifier and RF oscillator, which are amenable for analysis. Our proposed approach examines the key device characteristics that cause anonymity loss, countermeasures that can be applied by the nodes to regain the anonymity, and ways of thwarting such countermeasures. We develop identification algorithms based on statistical signal processing methods and address the challenging scenario when the units that need to be distinguished from one another are of the same model and from the same manufacturer. Using simulations and measurements of components that are commonly used in commercial communications systems, we show that our anonymity breaking techniques are effective. In the second part of the dissertation, we consider innovative approaches for the acquisition of frequency-sparse signals with wide-band receivers when a weak signal of interest is received in the presence of a very strong interference, and the effects of the nonlinearities in the low-noise amplifier at the receiver must be mitigated. All samples with amplitude above a given threshold, dictated by the linear input range of the receiver, are discarded to avoid the distortion caused by saturation of the low noise amplifier. Such a sampling scheme, while avoiding nonlinear distortion that cannot be corrected in the digital domain, poses challenges for signal reconstruction techniques, as the samples are taken non-uniformly, but also non-randomly. The considered approaches fall into the field of compressive sensing (CS); however, what differentiates them from conventional CS is that a structure is forced upon the measurement scheme. Such a structure causes a violation of the core CS assumption of the measurements\u27 randomness. We consider two different types of structured acquisition: signal independent and signal dependent structured acquisition. For the first case, we derive bounds on the number of samples needed for successful CS recovery when samples are drawn at random in predefined groups. For the second case, we consider enhancements of CS recovery methods when only small-amplitude samples of the signal that needs to be recovered are available for the recovery. Finally, we address a problem of spectral leakage due to the limited processing block size of block processing, wide-band receivers and propose an adaptive block size adjustment method, which leads to significant dynamic range improvements

An Overview on Application of Machine Learning Techniques in Optical Networks

Today's telecommunication networks have become sources of enormous amounts of widely heterogeneous data. This information can be retrieved from network traffic traces, network alarms, signal quality indicators, users' behavioral data, etc. Advanced mathematical tools are required to extract meaningful information from these data and take decisions pertaining to the proper functioning of the networks from the network-generated data. Among these mathematical tools, Machine Learning (ML) is regarded as one of the most promising methodological approaches to perform network-data analysis and enable automated network self-configuration and fault management. The adoption of ML techniques in the field of optical communication networks is motivated by the unprecedented growth of network complexity faced by optical networks in the last few years. Such complexity increase is due to the introduction of a huge number of adjustable and interdependent system parameters (e.g., routing configurations, modulation format, symbol rate, coding schemes, etc.) that are enabled by the usage of coherent transmission/reception technologies, advanced digital signal processing and compensation of nonlinear effects in optical fiber propagation. In this paper we provide an overview of the application of ML to optical communications and networking. We classify and survey relevant literature dealing with the topic, and we also provide an introductory tutorial on ML for researchers and practitioners interested in this field. Although a good number of research papers have recently appeared, the application of ML to optical networks is still in its infancy: to stimulate further work in this area, we conclude the paper proposing new possible research directions

Quality aspects of Internet telephony

Internet telephony has had a tremendous impact on how people communicate. Many now maintain contact using some form of Internet telephony. Therefore the motivation for this work has been to address the quality aspects of real-world Internet telephony for both fixed and wireless telecommunication. The focus has been on the quality aspects of voice communication, since poor quality leads often to user dissatisfaction. The scope of the work has been broad in order to address the main factors within IP-based voice communication. The first four chapters of this dissertation constitute the background material. The first chapter outlines where Internet telephony is deployed today. It also motivates the topics and techniques used in this research. The second chapter provides the background on Internet telephony including signalling, speech coding and voice Internetworking. The third chapter focuses solely on quality measures for packetised voice systems and finally the fourth chapter is devoted to the history of voice research. The appendix of this dissertation constitutes the research contributions. It includes an examination of the access network, focusing on how calls are multiplexed in wired and wireless systems. Subsequently in the wireless case, we consider how to handover calls from 802.11 networks to the cellular infrastructure. We then consider the Internet backbone where most of our work is devoted to measurements specifically for Internet telephony. The applications of these measurements have been estimating telephony arrival processes, measuring call quality, and quantifying the trend in Internet telephony quality over several years. We also consider the end systems, since they are responsible for reconstructing a voice stream given loss and delay constraints. Finally we estimate voice quality using the ITU proposal PESQ and the packet loss process. The main contribution of this work is a systematic examination of Internet telephony. We describe several methods to enable adaptable solutions for maintaining consistent voice quality. We have also found that relatively small technical changes can lead to substantial user quality improvements. A second contribution of this work is a suite of software tools designed to ascertain voice quality in IP networks. Some of these tools are in use within commercial systems today