Design and Validation of a Software Defined Radio Testbed for DVB-T Transmission

This paper describes the design and validation of a Software Defined Radio (SDR) testbed, which can be used for Digital Television transmission using the Digital Video Broadcasting - Terrestrial (DVB-T) standard. In order to generate a DVB-T-compliant signal with low computational complexity, we design an SDR architecture that uses the C/C++ language and exploits multithreading and vectorized instructions. Then, we transmit the generated DVB-T signal in real time, using a common PC equipped with multicore central processing units (CPUs) and a commercially available SDR modem board. The proposed SDR architecture has been validated using fixed TV sets, and portable receivers. Our results show that the proposed SDR architecture for DVB-T transmission is a low-cost low-complexity solution that, in the worst case, only requires less than 22% of CPU load and less than 170 MB of memory usage, on a 3.0 GHz Core i7 processor. In addition, using the same SDR modem board, we design an off-line software receiver that also performs time synchronization and carrier frequency offset estimation and compensation

Implementation of the specification and schematics design for the Ethernet Fronthaul Module

Abstract. This Master’s Thesis covers theory and implementation of a device which is designed using a small base station as a reference. The theory chapter consists of the description and theory of a cloud radio access network architecture, a high data rate interface, an active antenna system and a designed device itself. This theory chapter is used to give reasons why the device is designed. The implementation chapter is divided into two chapters, which explains how the implementation specification is done and how the schematics were drawn. The schematics chapter covers the modifications, which are done to the hardware of the original small base station. Ethernet Fronthaul Moduulin implementointispesifikaation ja piirikaavion suunnittelu. Tiivistelmä. Tämä diplomityö käsittelee pienen tukiasemalaitteen pohjalta suunniteltavan laitteen, siihen liittyvän teorian sekä toteutuksen. Laitteeseen liittyvä teoria muodostuu neljästä kappaleesta, jotka käsittelevät cloud radio access network -arkkitehtuuria, nopean data määrän rajapintaa, aktiivi antenni systeemiä sekä itse suunnitellun laitteen teoriaa. Teorialla pyritään pohjustamaan syitä siihen, minkä vuoksi kyseinen laite on haluttu toteuttaa. Laitteen toteutusta käsittelevä kappale on jaettu kahteen osioon, joissa kuvataan implementointispesifikaation toteutus ja piirikaavioiden piirto. Piirikaavio kappaleessa käsitellään muutokset, jotka on tehty pohjana käytettävän tukiaseman laitteistolle

Improving the Performance of Medium Access Control Protocols for Mobile Adhoc Network with Smart Antennas

Requirements for high quality links and great demand for high throughput in Wireless LAN especially Mobile Ad-hoc Network has motivated new enhancements and work in Wireless communications such as Smart Antenna Systems. Smart (adaptive) Antennas enable spatial reuse, increase throughput and they increase the communication range because of the increase directivity of the antenna array. These enhancements quantified for the physical layer may not be efficiently utilized, unless the Media Access Control (MAC) layer is designed accordingly. This thesis implements the behaviours of two MAC protocols, ANMAC and MMAC protocols in OPNET simulator. This method is known as the Physical-MAC layer simulation model. The entire physical layer is written in MATLAB, and MATLAB is integrated into OPNET to perform the necessary stochastic physical layer simulations. The aim is to investigate the performance improvement in throughput and delay of the selected MAC Protocols when using Smart Antennas in a mobile environment. Analytical methods were used to analyze the average throughput and delay performance of the selected MAC Protocols with Adaptive Antenna Arrays in MANET when using spatial diversity. Comparison study has been done between the MAC protocols when using Switched beam antenna and when using the proposed scheme. It has been concluded that the throughput and delay performance of the selected protocols have been improved by the use of Adaptive Antenna Arrays. The throughput and delay performance of ANMAC-SW and ANMAC-AA protocols was evaluated in details against regular Omni 802.11 stations. Our results promise significantly enhancement over Omni 802.11, with a throughput of 25% for ANMAC-SW and 90% for ANMC-AA. ANMAC-AA outperforms ANMAC-SW protocol by 60%. Simulation experiments indicate that by using the proposed scheme with 4 Adaptive Antenna Array per a node, the average throughput in the network can be improved up to 2 to 2.5 times over that obtained by using Switched beam Antennas. The proposed scheme improves the performances of both ANMAC and MMAC protocols but ANMAC outperforms MMAC by 30%

Design and implementation of components for renewably-powered base-stations with heterogeneous access channel

Providing high-speed broadband services in remote areas can be a challenging task, especially because of the lack of network infrastructure. As typical broadband technologies are often expensive to deploy, they require large investment from the local authorities. Previous studies have shown that a viable alternative is to use wireless base stations with high-throughput point to point (PTP) backhaul links. With base stations comes the problem of powering their systems, it is tackled in this thesis by relying on renewable energy harvesting, such as solar panels or wind turbines. This thesis, in the context of the sustainable cellular network harvesting ambient energy (SCAVENGE) project, aims to contribute to a reliable and energy efficient solution to this problem, by adjusting the design of an existing multi-radio energy harvesting base station. In Western Europe, 49 channels of 8 MHz were used for analogue TV transmissions, ranging from 470 MHz (Channel 21) to 862 MHz (Channel 69); this spectrum, now partially unused due to the digital television (DTV) switch-over, has been opened to alternative uses by the regulatory authorities. Using this newly freed ultra high frequency (UHF) range, also known as TV white space (TVWS), can offer reliable low-cost broadband access to housings and businesses in low-density areas. While UHF transmitters allow long range links, the overcrowding of the TV spectrum limits the achievable throughput; to increase the capacity of such TVWS rural broadband base station the UHF radio has previously been combined with a lower-range higher throughput GHz radio like Wireless Fidelity (WiFi). From the regulatory constraints of TVWS applications arises the need for frequency agile transceivers that observe strict spectral mask requirements, this guided previous works towards discrete Fourier transform (DFT) modulated filter-bank multicarrier (FBMC) systems. These systems are numerically efficient, as they permit the up-and-down conversion of the 40 TV channels at the cost of a single channel transceiver and the modulating transform. Typical implementations rely on power-of two fast Fourier transforms (FFTs); however the smallest transform covering the full 40 channels of the TVWS spectrum is a 64 points wide, thus involving 24 unused channels. In order to attain a more numerically-efficient implemented design, we introduce the use of mixed-radix FFTs modulating transform. Testing various sizes and architectures, this approach provides up to 6.7% of energy saving compared to previous designs. Different from orthogonal frequency-division multiplexing (OFDM), FBMC systems are generally expected to be more robust to synchronisation errors, as oversampled FBMC systems can include a guard band, and even in a doubly-dispersive channel, inter-carrier interference (ICI) can be considered negligible. Even though sub-channels can be treated independently—i.e. without the use of cross-terms—they still require equalisation. We introduce a per-band equalisation, amongst different options, a robust and fast blind approach based on a concurrent constant modulus (CM)/decision directed (DD) fractionally-space equaliser (FSE) is selected. The selected approach is capable of equalising a frequency-selective channel. Furthermore the proposed architecture is advantageous in terms of power consumption and implementation cost. After focussing on the design of the radio for TVWS transmission, we address a multi-radio user assignment problem. Using various power consumption and harvesting models for the base station, we formulate two optimisation problems, the first focuses on the base station power consumption, while the second concentrates on load balancing. We employ a dynamic programming approach to optimise the user assignment. The use of such algorithms could allow a downsizing of the power supply systems (harvesters and batteries), thus reducing the cost of the base station. Furthermore the algorithms provide a better balance between the number of users assigned to each network, resulting in a higher quality of service (QoS) and energy efficiency.Providing high-speed broadband services in remote areas can be a challenging task, especially because of the lack of network infrastructure. As typical broadband technologies are often expensive to deploy, they require large investment from the local authorities. Previous studies have shown that a viable alternative is to use wireless base stations with high-throughput point to point (PTP) backhaul links. With base stations comes the problem of powering their systems, it is tackled in this thesis by relying on renewable energy harvesting, such as solar panels or wind turbines. This thesis, in the context of the sustainable cellular network harvesting ambient energy (SCAVENGE) project, aims to contribute to a reliable and energy efficient solution to this problem, by adjusting the design of an existing multi-radio energy harvesting base station. In Western Europe, 49 channels of 8 MHz were used for analogue TV transmissions, ranging from 470 MHz (Channel 21) to 862 MHz (Channel 69); this spectrum, now partially unused due to the digital television (DTV) switch-over, has been opened to alternative uses by the regulatory authorities. Using this newly freed ultra high frequency (UHF) range, also known as TV white space (TVWS), can offer reliable low-cost broadband access to housings and businesses in low-density areas. While UHF transmitters allow long range links, the overcrowding of the TV spectrum limits the achievable throughput; to increase the capacity of such TVWS rural broadband base station the UHF radio has previously been combined with a lower-range higher throughput GHz radio like Wireless Fidelity (WiFi). From the regulatory constraints of TVWS applications arises the need for frequency agile transceivers that observe strict spectral mask requirements, this guided previous works towards discrete Fourier transform (DFT) modulated filter-bank multicarrier (FBMC) systems. These systems are numerically efficient, as they permit the up-and-down conversion of the 40 TV channels at the cost of a single channel transceiver and the modulating transform. Typical implementations rely on power-of two fast Fourier transforms (FFTs); however the smallest transform covering the full 40 channels of the TVWS spectrum is a 64 points wide, thus involving 24 unused channels. In order to attain a more numerically-efficient implemented design, we introduce the use of mixed-radix FFTs modulating transform. Testing various sizes and architectures, this approach provides up to 6.7% of energy saving compared to previous designs. Different from orthogonal frequency-division multiplexing (OFDM), FBMC systems are generally expected to be more robust to synchronisation errors, as oversampled FBMC systems can include a guard band, and even in a doubly-dispersive channel, inter-carrier interference (ICI) can be considered negligible. Even though sub-channels can be treated independently—i.e. without the use of cross-terms—they still require equalisation. We introduce a per-band equalisation, amongst different options, a robust and fast blind approach based on a concurrent constant modulus (CM)/decision directed (DD) fractionally-space equaliser (FSE) is selected. The selected approach is capable of equalising a frequency-selective channel. Furthermore the proposed architecture is advantageous in terms of power consumption and implementation cost. After focussing on the design of the radio for TVWS transmission, we address a multi-radio user assignment problem. Using various power consumption and harvesting models for the base station, we formulate two optimisation problems, the first focuses on the base station power consumption, while the second concentrates on load balancing. We employ a dynamic programming approach to optimise the user assignment. The use of such algorithms could allow a downsizing of the power supply systems (harvesters and batteries), thus reducing the cost of the base station. Furthermore the algorithms provide a better balance between the number of users assigned to each network, resulting in a higher quality of service (QoS) and energy efficiency

Radio-Communications Architectures

Wireless communications, i.e. radio-communications, are widely used for our different daily needs. Examples are numerous and standard names like BLUETOOTH, WiFI, WiMAX, UMTS, GSM and, more recently, LTE are well-known [Baudoin et al. 2007]. General applications in the RFID or UWB contexts are the subject of many papers. This chapter presents radio-frequency (RF) communication systems architecture for mobile, wireless local area networks (WLAN) and connectivity terminals. An important aspect of today's applications is the data rate increase, especially in connectivity standards like WiFI and WiMAX, because the user demands high Quality of Service (QoS). To increase the data rate we tend to use wideband or multi-standard architecture. The concept of software radio includes a self-reconfigurable radio link and is described here on its RF aspects. The term multi-radio is preferred. This chapter focuses on the transmitter, yet some considerations about the receiver are given. An important aspect of the architecture is that a transceiver is built with respect to the radio-communications signals. We classify them in section 2 by differentiating Continuous Wave (CW) and Impulse Radio (IR) systems. Section 3 is the technical background one has to consider for actual applications. Section 4 summarizes state-of-the-art high data rate architectures and the latest research in multi-radio systems. In section 5, IR architectures for Ultra Wide Band (UWB) systems complete this overview; we will also underline the coexistence and compatibility challenges between CW and IR systems

信頼性の高い大容量公共用移動通信システムを実現するためのソフトウェア無線およびコグニティブ無線に関する研究

Public safety mobile wireless communication systems (PMCSs) are widely used by public safety personnel, such as firefighters and police, as well as local governments. PMCSs are crucial to protect safety and security of communities. Conventional PMCSs effectively cover underpopulated areas as well as urban areas by employing long-zone scheme. Since the PMCSs can cover areas that are not covered by commercial cellule systems, they play the important role as the only communication tool. Moreover, the conventional PMCSs have enhanced robustness and reliability. The conventional PMCSs can keep their services even if backbone lines are cut off. In contrast, short-zone scheme systems cannot offer stable and wide service area without backbone line connection. For example, the Great East Japan Earthquake in Japan, police mobile communication systems had kept their functions while cellular phones became disabled. PMCSs are required to be quite high robustness and reliability in order to save human life. Recently, conventional PMCSs are required to realize further expansion of service areas and high speed transmission although they have stably provided users with wide service areas so far. Nowadays, in order to solve complicated public affair quickly, more stable service areas and broadband communication are required. Compared with conventional PMCSs in urban areas, commercial wireless mobile communication systems (CWMCSs) such as cellular systems supply stable service areas and broadband communication in times of peace. In accordance with development of wireless technology, PMCSs need to keep pace with CWMCSs. However, conventional PMCSs can hardly realize further stable service areas and high speed transmission because of large-zone scheme. In terms of realization of further stable service areas, no-service areas cannot be eliminated easily. This is because no-service areas are mostly attributed to shadowing; in large-zone scheme, a no-service area that must essentially be covered by a certain base station is seldom covered by other neighboring base stations. Although new allocation of base stations is fundamental answer to solve no-service area problem in PMCSs, building new base stations of PMCSs that are not used for a commercial purpose is restricted by national and local budget. Realization of high speed transmission of PMCSs is also difficult because of large-zone scheme. To realize high speed transmission, increase of transmit power or shrinking of service area coverage is required to compensate Signal to Noise Power Ratio (SNR) deterioration caused by expanding bandwidth. Increase of transmission power of mobile station used in large-zone scheme systems is almost impossible because transmission power of mobile station is originally high. Thus, shrinking of service areas is necessary for high speed communication. Currently, to realize high speed transmission, next generation broadband PMCSs (BPMCSs) employing short-or middle-zone scheme are being developed. In the 3GPP, it is considered that the Long Term Evolution (LTE) is used for communication of public safety. In Japan, National Institute of Information and Communications Technology (NICT) has researched and developed Public Broadband Wireless Communication System (PBWCS), which employs 200MHz as carrier frequency. The PBWCS has already been equipped in national police agency in Japan. However, we consider that the conventional narrowband PMCSs (NPM-CSs) are not replaced with the BPMCSs completely. This is because the BPMCSs cannot cover all the areas that the conventional NPM-CSs have covered. Moreover, there are problems of robustness and reliability when accidents happen. Hence, users of PMCSs will utilize both of NPMCSs and BPMCSs in accordance with the situation. In this case, users equipping several terminals feel inconvenient and also radio resources are not used effectively. The best solution to realize optimal PMCSs is employing heterogeneous cognitive radio (HCR) for PMCSs. By applying the HCR to PMCSs, service areas expansion and high speed transmission in PM-CSs will be realized effectively. We propose an integrated system combining NPMCSs with CWMCSs and BPMCSs to make communication quality of the PMCSs improve. The proposed HCR recognizes communication conditions of several systems and then provides PMCS\u27s users with optimal communication quality. Although software defined radio techniques (SDR) are ideal to operate cognitive radio more flexibly, we deal with HCR mainly to realize combined systems in this thesis. We study advantages, problems, and their solution to realize the HCR for PMCSs. Firstly, we research service area expansion of NPMCSs using HCR. The proposed HCR is utilized for stabilization of NPMCS\u27s service area. If communication quality of a NPMCS deteriorates owing to shadowing, the proposed HCR terminal obtains a part of NPMCS\u27s data called subsidiary information (SI) from CWMCSs or BPMCSs. The proposed HCR terminal can improve PMCS\u27s bit error rate (BER) performance by combining the SI with received signals of the NPMCS and then decoding the combined signals using forward error correction (FEC). Since convolutional codes are often used in FEC of NPMCSs, we consider BER improvement methods of the convolutional code. We derive modified Viterbi algorithm from maximum likelihood sequence estimation (MLSE) of the combined signals. Moreover, we introduce the distance spectrum to evaluate characteristics of the convolutional codes. The distance spectrum is used for estimating improvement of BER performances. Next, we consider synchronization methods to realize the proposed HCR. In the HCR, there are two types of synchronization method; one is the self-synchronization method to synchronize each system itself. The other is the co-synchronization method to combine different systems. In this thesis, we consider self-synchronization methods of NPMCSs mainly. This is because the HCR aims to improve communication quality of NPMCSs equipping conventional self-synchronization methods that are not probably available in low SNR environments. In this environment, since NPMCSs can hardly obtain their self-synchronization alone, powerful self-synchronization methods using HCR techniques are required. We propose two synchronization methods that are utilization of global portioning system (GPS) signals and utilization of the SI, respectively. The synchronization methods utilizing GPS signals can acquire timing synchronization. To obtain timing synchronization, the proposed HCR acquires accurate time and own location using the GPS signals. The HCR also gets the location of base stations and the frame timing by making the SI convey their information. Since the HCR can know accurate time and distance between the base station and the HCR, synchronization timing can be calculated. However, in GPS based method, preciseness of timing synchronization may be deteriorated by measurement error of GPS signals, diffraction caused by mountains, and propagation delay caused by reection. For this reason, we consider a mitigation method of the timing error and then evaluate BER performances using computer simulation. Moreover, we propose a SI based synchronization method that can obtain timing synchronization without GPS signals. The proposed method is employed when a NPMCS uses differential coded π/4 shift QPSK as the modulation scheme. The notable feature of the proposed method is to convey the phase rotation of the π/4 shift QPSK as the SI. The HCR can forecast PMCS\u27s envelopes from the obtained SI and then obtain the timing synchronization by correlating the forecasted envelopes with real received envelopes. Since the proposed method can also be used for co-synchronization and BER improvement, CWMCS\u27s resource consumption to convey the SI is suppressed. Finally, we consider HCRs combining several PMCSs. In this thesis, the combination of NPMCSs and the combination of a NPMCS and a BPMCS are researched. In the combination of NPMCSs, we consider that several PMCSs are integrated by SDR. In the combination of a NPMCS and a BPMCS, we propose site diversity based on HCR to improve uplink communication quality of the BPMCS. In this diversity, since uplink interference must be avoided, we employ combination of the adaptive array and HCR techniques. Moreover, we propose information compression methods for narrow band backbone lines so that received data can be conveyed to head office with little BER deterioration. PMCSs will have played an important role to ensure social safety. In the thesis, we consider the one of the next generation PMCSs employing SDR and HCR. Using this research, we can obtain a direction of optimal PMCSs. The next step that we need to perform is to apply our proposed method to actual radio systems. We must continue this research so that high reliable and compact PMCSs can be realized.電気通信大学201

Monostatic Airborne Synthetic Aperture Radar Using Commercial WiMAX Transceivers In the License-exempt Spectrum

The past half-century witnessed an evolution of synthetic aperture radar (SAR). Boosted by digital signal processing (DSP), a variety of SAR imaging algorithms have been developed, in which the wavenumber domain algorithm is mature for airborne SAR and independent of signal waveforms. Apart from the algorithm development, there is a growing interest in how to acquire the raw data of targets’ echoes before the DSP for SAR imaging in a cost-effective way. For the data acquisition, various studies over the past 15 years have shed light on utilizing the signal generated from the ubiquitous broadband wireless technology – orthogonal frequency division multiplexing (OFDM). However, the purpose of this thesis is to enable commercial OFDM-based wireless systems to work as an airborne SAR sensor. The unlicensed devices of Worldwide interoperability for Microwave Access (WiMAX) are the first option, owing to their accessibility, similarity and economy. This dissertation first demonstrates the feasibility of applying WiMAX to SAR by discussing their similar features. Despite the similarities they share, the compatibility of the two technologies is undermined by a series of problems resulted from WiMAX transceiver mechanisms and industrial rules for radiated power. In order to directly apply commercial WiMAX base station transceivers in unlicensed band to airborne SAR application, we propose a radio-frequency (RF) front design together with a signal processing means. To be specific, a double-pole, double-throw (DPDT) switch is inserted between an antenna and two WiMAX transceivers for generating pulsed signal. By simulations, the transmitted power of the SAR sensor is lower than 0dBm, while its imaging range can be over 10km for targets with relatively large radar cross section (RCS), such as a ship. Its range resolution is 9.6m whereas its cross-range resolution is finer than 1m. Equipped with the multi-mode, this SAR sensor is further enhanced to satisfy the requirements of diversified SAR applications. For example, the width of the scan-mode SAR’s range swath is 2.1km, over five times the width of other modes. Vital developed Matlab code is given in Appendix D, and its correctness is shown by comparing with the image of chirped SAR. To summarize, the significance of this dissertation is to propose, for the first time, a design of directly leveraging commercial OFDM-based systems for airborne SAR imaging. Compared with existing designs of airborne SAR, it is a promising low-cost solution

Design, implementation and experimental evaluation of a network-slicing aware mobile protocol stack

Mención Internacional en el título de doctorWith the arrival of new generation mobile networks, we currently observe a paradigm shift, where monolithic network functions running on dedicated hardware are now implemented as software pieces that can be virtualized on general purpose hardware platforms. This paradigm shift stands on the softwarization of network functions and the adoption of virtualization techniques. Network Function Virtualization (NFV) comprises softwarization of network elements and virtualization of these components. It brings multiple advantages: (i) Flexibility, allowing an easy management of the virtual network functions (VNFs) (deploy, start, stop or update); (ii) efficiency, resources can be adequately consumed due to the increased flexibility of the network infrastructure; and (iii) reduced costs, due to the ability of sharing hardware resources. To this end, multiple challenges must be addressed to effectively leverage of all these benefits. Network Function Virtualization envisioned the concept of virtual network, resulting in a key enabler of 5G networks flexibility, Network Slicing. This new paradigm represents a new way to operate mobile networks where the underlying infrastructure is "sliced" into logically separated networks that can be customized to the specific needs of the tenant. This approach also enables the ability of instantiate VNFs at different locations of the infrastructure, choosing their optimal placement based on parameters such as the requirements of the service traversing the slice or the available resources. This decision process is called orchestration and involves all the VNFs withing the same network slice. The orchestrator is the entity in charge of managing network slices. Hands-on experiments on network slicing are essential to understand its benefits and limits, and to validate the design and deployment choices. While some network slicing prototypes have been built for Radio Access Networks (RANs), leveraging on the wide availability of radio hardware and open-source software, there is no currently open-source suite for end-to-end network slicing available to the research community. Similarly, orchestration mechanisms must be evaluated as well to properly validate theoretical solutions addressing diverse aspects such as resource assignment or service composition. This thesis contributes on the study of the mobile networks evolution regarding its softwarization and cloudification. We identify software patterns for network function virtualization, including the definition of a novel mobile architecture that squeezes the virtualization architecture by splitting functionality in atomic functions. Then, we effectively design, implement and evaluate of an open-source network slicing implementation. Our results show a per-slice customization without paying the price in terms of performance, also providing a slicing implementation to the research community. Moreover, we propose a framework to flexibly re-orchestrate a virtualized network, allowing on-the-fly re-orchestration without disrupting ongoing services. This framework can greatly improve performance under changing conditions. We evaluate the resulting performance in a realistic network slicing setup, showing the feasibility and advantages of flexible re-orchestration. Lastly and following the required re-design of network functions envisioned during the study of the evolution of mobile networks, we present a novel pipeline architecture specifically engineered for 4G/5G Physical Layers virtualized over clouds. The proposed design follows two objectives, resiliency upon unpredictable computing and parallelization to increase efficiency in multi-core clouds. To this end, we employ techniques such as tight deadline control, jitter-absorbing buffers, predictive Hybrid Automatic Repeat Request, and congestion control. Our experimental results show that our cloud-native approach attains > 95% of the theoretical spectrum efficiency in hostile environments where stateof- the-art architectures collapse.This work has been supported by IMDEA Networks InstitutePrograma de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Francisco Valera Pintor.- Secretario: Vincenzo Sciancalepore.- Vocal: Xenofon Fouka