HAPPY: Hybrid Address-based Page Policy in DRAMs

Memory controllers have used static page closure policies to decide whether a row should be left open, open-page policy, or closed immediately, close-page policy, after the row has been accessed. The appropriate choice for a particular access can reduce the average memory latency. However, since application access patterns change at run time, static page policies cannot guarantee to deliver optimum execution time. Hybrid page policies have been investigated as a means of covering these dynamic scenarios and are now implemented in state-of-the-art processors. Hybrid page policies switch between open-page and close-page policies while the application is running, by monitoring the access pattern of row hits/conflicts and predicting future behavior. Unfortunately, as the size of DRAM memory increases, fine-grain tracking and analysis of memory access patterns does not remain practical. We propose a compact memory address-based encoding technique which can improve or maintain the performance of DRAMs page closure predictors while reducing the hardware overhead in comparison with state-of-the-art techniques. As a case study, we integrate our technique, HAPPY, with a state-of-the-art monitor, the Intel-adaptive open-page policy predictor employed by the Intel Xeon X5650, and a traditional Hybrid page policy. We evaluate them across 70 memory intensive workload mixes consisting of single-thread and multi-thread applications. The experimental results show that using the HAPPY encoding applied to the Intel-adaptive page closure policy can reduce the hardware overhead by 5X for the evaluated 64 GB memory (up to 40X for a 512 GB memory) while maintaining the prediction accuracy

DReAM: An approach to estimate per-Task DRAM energy in multicore systems

Accurate per-task energy estimation in multicore systems would allow performing per-task energy-aware task scheduling and energy-aware billing in data centers, among other applications. Per-task energy estimation is challenged by the interaction between tasks in shared resources, which impacts tasks’ energy consumption in uncontrolled ways. Some accurate mechanisms have been devised recently to estimate per-task energy consumed on-chip in multicores, but there is a lack of such mechanisms for DRAM memories. This article makes the case for accurate per-task DRAM energy metering in multicores, which opens new paths to energy/performance optimizations. In particular, the contributions of this article are (i) an ideal per-task energy metering model for DRAM memories; (ii) DReAM, an accurate yet low cost implementation of the ideal model (less than 5% accuracy error when 16 tasks share memory); and (iii) a comparison with standard methods (even distribution and access-count based) proving that DReAM is much more accurate than these other methods.Peer ReviewedPostprint (author's final draft

Improving DRAM Performance by Parallelizing Refreshes with Accesses

Modern DRAM cells are periodically refreshed to prevent data loss due to leakage. Commodity DDR DRAM refreshes cells at the rank level. This degrades performance significantly because it prevents an entire rank from serving memory requests while being refreshed. DRAM designed for mobile platforms, LPDDR DRAM, supports an enhanced mode, called per-bank refresh, that refreshes cells at the bank level. This enables a bank to be accessed while another in the same rank is being refreshed, alleviating part of the negative performance impact of refreshes. However, there are two shortcomings of per-bank refresh. First, the per-bank refresh scheduling scheme does not exploit the full potential of overlapping refreshes with accesses across banks because it restricts the banks to be refreshed in a sequential round-robin order. Second, accesses to a bank that is being refreshed have to wait. To mitigate the negative performance impact of DRAM refresh, we propose two complementary mechanisms, DARP (Dynamic Access Refresh Parallelization) and SARP (Subarray Access Refresh Parallelization). The goal is to address the drawbacks of per-bank refresh by building more efficient techniques to parallelize refreshes and accesses within DRAM. First, instead of issuing per-bank refreshes in a round-robin order, DARP issues per-bank refreshes to idle banks in an out-of-order manner. Furthermore, DARP schedules refreshes during intervals when a batch of writes are draining to DRAM. Second, SARP exploits the existence of mostly-independent subarrays within a bank. With minor modifications to DRAM organization, it allows a bank to serve memory accesses to an idle subarray while another subarray is being refreshed. Extensive evaluations show that our mechanisms improve system performance and energy efficiency compared to state-of-the-art refresh policies and the benefit increases as DRAM density increases.Comment: The original paper published in the International Symposium on High-Performance Computer Architecture (HPCA) contains an error. The arxiv version has an erratum that describes the error and the fix for i

DReAM: Per-task DRAM energy metering in multicore systems

Interaction across applications in DRAM memory impacts its energy consumption. This paper makes the case for accurate per-task DRAM energy metering in multicores, which opens new paths to energy/performance optimizations, such as per-task energy-aware task scheduling and energy-aware billing in datacenters. In particular, the contributions of this paper are (i) an ideal per-task energy metering model for DRAM memories; (ii) DReAM, an accurate, yet low cost, implementation of the ideal model (less than 5% accuracy error when 16 tasks share memory); and (iii) a comparison with standard methods (even distribution and access-count based) proving that DReAM is more accurate than these other methods.This work has been partially supported by the Spanish Ministry of Science and Innovation under grant TIN2012-34557, the HiPEAC Network of Excellence, by the European Research Council under the European Union’s 7th FP, ERC Grant Agreement n. 321253, and by a joint study agreement between IBM and BSC (number W1361154). Qixiao Liu has also been funded by the Chinese Scholarship Council under grant 2010608015.Postprint (published version

Reducing main memory access latency through SDRAM address mapping techniques and access reordering mechanisms

As the performance gap between microprocessors and memory continues to increase, main memory accesses result in long latencies which become a factor limiting system performance. Previous studies show that main memory access streams contain significant localities and SDRAM devices provide parallelism through multiple banks and channels. These locality and parallelism have not been exploited thoroughly by conventional memory controllers. In this thesis, SDRAM address mapping techniques and memory access reordering mechanisms are studied and applied to memory controller design with the goal of reducing observed main memory access latency. The proposed bit-reversal address mapping attempts to distribute main memory accesses evenly in the SDRAM address space to enable bank parallelism. As memory accesses to unique banks are interleaved, the access latencies are partially hidden and therefore reduced. With the consideration of cache conflict misses, bit-reversal address mapping is able to direct potential row conflicts to different banks, further improving the performance. The proposed burst scheduling is a novel access reordering mechanism, which creates bursts by clustering accesses directed to the same rows of the same banks. Subjected to a threshold, reads are allowed to preempt writes and qualified writes are piggybacked at the end of the bursts. A sophisticated access scheduler selects accesses based on priorities and interleaves accesses to maximize the SDRAM data bus utilization. Consequentially burst scheduling reduces row conflict rate, increasing and exploiting the available row locality. Using a revised SimpleScalar and M5 simulator, both techniques are evaluated and compared with existing academic and industrial solutions. With SPEC CPU2000 benchmarks, bit-reversal reduces the execution time by 14% on average over traditional page interleaving address mapping. Burst scheduling also achieves a 15% reduction in execution time over conventional bank in order scheduling. Working constructively together, bit-reversal and burst scheduling successfully achieve a 19% speedup across simulated benchmarks

Memory controller for vector processor

To manage power and memory wall affects, the HPC industry supports FPGA reconfigurable accelerators and vector processing cores for data-intensive scientific applications. FPGA based vector accelerators are used to increase the performance of high-performance application kernels. Adding more vector lanes does not affect the performance, if the processor/memory performance gap dominates. In addition if on/off-chip communication time becomes more critical than computation time, causes performance degradation. The system generates multiple delays due to application’s irregular data arrangement and complex scheduling scheme. Therefore, just like generic scalar processors, all sets of vector machine – vector supercomputers to vector microprocessors – are required to have data management and access units that improve the on/off-chip bandwidth and hide main memory latency. In this work, we propose an Advanced Programmable Vector Memory Controller (PVMC), which boosts noncontiguous vector data accesses by integrating descriptors of memory patterns, a specialized on-chip memory, a memory manager in hardware, and multiple DRAM controllers. We implemented and validated the proposed system on an Altera DE4 FPGA board. The PVMC is also integrated with ARM Cortex-A9 processor on Xilinx Zynq All-Programmable System on Chip architecture. We compare the performance of a system with vector and scalar processors without PVMC. When compared with a baseline vector system, the results show that the PVMC system transfers data sets up to 1.40x to 2.12x faster, achieves between 2.01x to 4.53x of speedup for 10 applications and consumes 2.56 to 4.04 times less energy.Peer ReviewedPostprint (author's final draft

Software and hardware methods for memory access latency reduction on ILP processors

While microprocessors have doubled their speed every 18 months, performance improvement of memory systems has continued to lag behind. to address the speed gap between CPU and memory, a standard multi-level caching organization has been built for fast data accesses before the data have to be accessed in DRAM core. The existence of these caches in a computer system, such as L1, L2, L3, and DRAM row buffers, does not mean that data locality will be automatically exploited. The effective use of the memory hierarchy mainly depends on how data are allocated and how memory accesses are scheduled. In this dissertation, we propose several novel software and hardware techniques to effectively exploit the data locality and to significantly reduce memory access latency.;We first presented a case study at the application level that reconstructs memory-intensive programs by utilizing program-specific knowledge. The problem of bit-reversals, a set of data reordering operations extensively used in scientific computing program such as FFT, and an application with a special data access pattern that can cause severe cache conflicts, is identified in this study. We have proposed several software methods, including padding and blocking, to restructure the program to reduce those conflicts. Our methods outperform existing ones on both uniprocessor and multiprocessor systems.;The access latency to DRAM core has become increasingly long relative to CPU speed, causing memory accesses to be an execution bottleneck. In order to reduce the frequency of DRAM core accesses to effectively shorten the overall memory access latency, we have conducted three studies at this level of memory hierarchy. First, motivated by our evaluation of DRAM row buffer\u27s performance roles and our findings of the reasons of its access conflicts, we propose a simple and effective memory interleaving scheme to reduce or even eliminate row buffer conflicts. Second, we propose a fine-grain priority scheduling scheme to reorder the sequence of data accesses on multi-channel memory systems, effectively exploiting the available bus bandwidth and access concurrency. In the final part of the dissertation, we first evaluate the design of cached DRAM and its organization alternatives associated with ILP processors. We then propose a new memory hierarchy integration that uses cached DRAM to construct a very large off-chip cache. We show that this structure outperforms a standard memory system with an off-level L3 cache for memory-intensive applications.;Memory access latency has become a major performance bottleneck for memory-intensive applications. as long as DRAM technology remains its most cost-effective position for making main memory, the memory performance problem will continue to exist. The studies conducted in this dissertation attempt to address this important issue. Our proposed software and hardware schemes are effective and applicable, which can be directly used in real-world memory system designs and implementations. Our studies also provide guidance for application programmers to understand memory performance implications, and for system architects to optimize memory hierarchies