PRACTICAL QUANTIZE-AND-FORWARD SCHEMES FOR THE FREQUENCY RELAY CHANNEL

International audienceWe consider static and quasi-static relay channels in which the source-destination and relay-destination signals are assumed to be orthogonal and thus have to be recombined at the destination. We propose cheap relaying schemes that are optimized from the knowledge of the signal-to-noise ratios (SNRs) of the source-relay and relay-destination channels at the relay. For this purpose the scheme under investigation is assumed to be scalar and have to minimize the mean square error between the source signal and its reconstructed version at the destination. We propose a quantize-and-forward (QF) scheme, which is a generalization of techniques based on joint source-channel coding. To further improve the receiver performance when the source-relay SNR is relatively poor we propose a Maximum Likelihood detector (MLD) designed for the QF protocol

Regenerative and Adaptive schemes Based on Network Coding for Wireless Relay Network

Recent technological advances in wireless communications offer new opportunities and challenges for relay network.To enhance system performance, Demodulate-Network Coding (Dm-NC) scheme has been examined at relay node; it works directly to De-map the received signals and after that forward the mixture to the destination. Simulation analysis has been proven that the performance of Dm-NC has superiority over analog-NC. In addition, the Quantize-Decode-NC scheme (QDF-NC) has been introduced. The presented simulation results clearly provide that the QDF-NC perform better than analog-NC. The toggle between analogNC and QDF-NC is simulated in order to investigate delay and power consumption reduction at relay node.Comment: 11 pages, 8 figures, International Journal of Computer Networks & Communications (IJCNC), Vol.4, No.3, May 201

On the practicability of full-duplex relaying in OFDM systems

A full-duplex relay is spectrally more efficient than a half-duplex relay because it uses the full band of available frequencies to receive and transmit signals simultaneously. However, the loop interference arriving at the receiver of the relay due to its own transmission is a major hindrance that must be overcome before the idea of full-duplex relaying can be put to practice. The simple technique of subtractive cancellation alone, in theory, could eliminate the loop interference completely from the received signal. In practice, however, the nonidealities inherent in the actual components within the relay transceivers create less than ideal conditions for the cancellation to work perfectly. This thesis studies the effect of such nonidealities on the performance of a single-input-single-output (SISO) full-duplex relay. The primary focus is on formulating an analytical framework that helps evaluate the feasibility of such a relay. The outcome illustrates that a number of factors determine whether the idea of a full-duplex relay with subtractive loop interference cancellation can be implemented in practice. As expected, it is necessary to have an analogy to-digital converter (ADC) with a large dynamic range at the receiver to ensure that the incoming can be digitized with sufficient accuracy. Another important requirement is to have an excellent transmitter with a very small error vector magnitude (EVM) because the contribution of the unknown random error in the transmitted signal to the loop interference cannot be cancelled no matter how accurately the incoming signal is digitized. Moreover, the physical design of the relay must, by itself, be able to provide a certain amount of natural isolation between the transmitting and receiving antennas; otherwise, the part of the loop interference resulting from the transmitter error alone can be sufficient to drown the useful signal beyond recovery

Physical Layer Cooperation:Theory and Practice

Information theory has long pointed to the promise of physical layer cooperation in boosting the spectral efficiency of wireless networks. Yet, the optimum relaying strategy to achieve the network capacity has till date remained elusive. Recently however, a relaying strategy termed Quantize-Map-and-Forward (QMF) was proved to achieve the capacity of arbitrary wireless networks within a bounded additive gap. This thesis contributes to the design, analysis and implementation of QMF relaying by optimizing its performance for small relay networks, proposing low-complexity iteratively decodable codes, and carrying out over-the-air experiments using software-radio testbeds to assess real-world potential and competitiveness. The original QMF scheme has each relay performing the same operation, agnostic to the network topology and the channel state information (CSI); this facilitates the analysis for arbitrary networks, yet comes at a performance penalty for small networks and medium SNR regimes. In this thesis, we demonstrate the benefits one can gain for QMF if we optimize its performance by leveraging topological and channel state information. We show that for the N-relay diamond network, by taking into account topological information, we can exponentially reduce the QMF additive approximation gap from $\Theta(N)$ bits/s/Hz to $\Theta(\log N)$ bits/s/Hz, while for the one-relay and two-relay networks, use of topological information and CSI can help to gain as much as $6$ dB. Moreover, we explore what benefits we can realize if we jointly optimize QMF and half-duplex scheduling, as well as if we employ hybrid schemes that combine QMF and Decode-and-Forward (DF) relay operations. To take QMF from being a purely information-theoretic idea to an implementable strategy, we derive a structure employing Low-Density-Parity-Check (LDPC) ensembles for the relay node operations and message-passing algorithms for decoding. We demonstrate through extensive simulation results over the full-duplex diamond network, that our designs offer a robust performance over fading channels and achieves the full diversity order of our network at moderate SNRs. Next, we explore the potential real-world impact of QMF and present the design and experimental evaluation of a wireless system that exploits relaying in the context of WiFi. We deploy three main competing strategies that have been proposed for relaying, Amplify-and-Forward (AF), DF and QMF, on the WarpLab software radio platform. We present experimental results--to the best of our knowledge, the first ones--that compare QMF, AF and DF in a realistic indoor setting. We find that QMF is a competitive scheme to the other two, offering in some cases up to 12% throughput benefits and up to 60% improvement in frame error-rates over the next best scheme. We then present a more advanced architecture for physical layer cooperation (termed QUILT), that seamlessly adapts to the underlying network configuration to achieve competitive or better performance than the best current approaches. It combines on-demand, opportunistic use of DF or QMF followed by interleaving at the relay, with hybrid decoding at the destination that extracts information from even potentially undecodable received frames. We theoretically quantify how our design choices affect the system performance. We also deploy QUILT on WarpLab and show through over-the-air experiments up to $5$ times FER improvement over the next best cooperative protocol

On implementation aspects of decode and forward and compress and forward relay protocols

In this work, the common relay protocols Decode-and-Forward and Compress-and-Forward (CF) are investigated from a practical point of view: This involves on the one hand the impact of imperfections like channel and carrier phase stimation errors and on the other hand, the question of how to implement relay protocol specific signal processing like quantization for CF which is modeled in information theory simply by additive quantizer noise. To evaluate the performance, achievable rates are determined either numerically with the help of the Max-Flow Min-Cut theorem or by link level simulations.Diese Arbeit untersucht die Relay-Protokolle Decode-and-Forward und Compress-and-Forward (CF) mit dem Fokus auf einer praktischen Umsetzung. Es werden sowohl Störeinflüsse wie Kanal- und Phasenschätzfehler betrachtet als auch spezielle Kompressionsverfahren für das CF Protokoll implementiert. Von großer Bedeutung ist hier die Kompression in Form der Quantisierung, weil diese in der Informationstheorie lediglich durch Quantisierungsrauschen modelliert wird. Zur Auswertung der Leistungsfähigkeit der Protokolle werden die erzielbaren Raten entweder numerisch oder durch Simulation bestimmt

Coding for Cooperative Communications

The area of cooperative communications has received tremendous research interest in recent years. This interest is not unwarranted, since cooperative communications promises the ever-so-sought after diversity and multiplexing gains typically associated with multiple-input multiple-output (MIMO) communications, without actually employing multiple antennas. In this dissertation, we consider several cooperative communication channels, and for each one of them, we develop information theoretic coding schemes and derive their corresponding performance limits. We next develop and design practical coding strategies which perform very close to the information theoretic limits. The cooperative communication channels we consider are: (a) The Gaussian relay channel, (b) the quasi-static fading relay channel, (c) cooperative multiple-access channel (MAC), and (d) the cognitive radio channel (CRC). For the Gaussian relay channel, we propose a compress-forward (CF) coding strategy based on Wyner-Ziv coding, and derive the achievable rates specifically with BPSK modulation. The CF strategy is implemented with low-density parity-check (LDPC) and irregular repeataccumulate codes and is found to operate within 0.34 dB of the theoretical limit. For the quasi-static fading relay channel, we assume that no channel state information (CSI) is available at the transmitters and propose a rateless coded protocol which uses rateless coded versions of the CF and the decode-forward (DF) strategy. We implement the protocol with carefully designed Raptor codes and show that the implementation suffers a loss of less than 10 percent from the information theoretical limit. For the MAC, we assume quasi-static fading, and consider cooperation in the low-power regime with the assumption that no CSI is available at the transmitters. We develop cooperation methods based on multiplexed coding in conjunction with rateless codes and find the achievable rates and in particular the minimum energy per bit to achieve a certain outage probability. We then develop practical coding methods using Raptor codes, which performs within 1.1 dB of the performance limit. Finally, we consider a CRC and develop a practical multi-level dirty-paper coding strategy using LDPC codes for channel coding and trellis-coded quantization for source coding. The designed scheme is found to operate within 0.78 dB of the theoretical limit. By developing practical coding strategies for several cooperative communication channels which exhibit performance close to the information theoretic limits, we show that cooperative communications not only provide great benefits in theory, but can possibly promise the same benefits when put into practice. Thus, our work can be considered a useful and necessary step towards the commercial realization of cooperative communications

Achievable Rate Regions for Two-Way Relay Channel using Nested Lattice Coding

This paper studies Gaussian Two-Way Relay Channel where two communication nodes exchange messages with each other via a relay. It is assumed that all nodes operate in half duplex mode without any direct link between the communication nodes. A compress-and-forward relaying strategy using nested lattice codes is first proposed. Then, the proposed scheme is improved by performing a layered coding : a common layer is decoded by both receivers and a refinement layer is recovered only by the receiver which has the best channel conditions. The achievable rates of the new scheme are characterized and are shown to be higher than those provided by the decode-and-forward strategy in some regions.Comment: 27 pages, 13 figures, Submitted to IEEE Transactions on Wireless Communications (October 2013

Soft information based protocols in network coded relay networks

Future wireless networks aim at providing higher quality of service (QoS) to mobile users. The emergence of relay technologies has shed light on new methodologies through which the system capacity can be dramatically increased with low deployment cost. In this thesis, novel relay technologies have been proposed in two practical scenarios: wireless sensor networks (WSN) and cellular networks. In practical WSN designs, energy conservation is the single most important requirement. This thesis draws attention to a multiple access relay channels model in the WSN. The network coded symbol for the received signals from correlated sources has been derived; the network coded symbol vector is then converted into a sparse vector, after which a compressive sensing (CS) technique is applied over the sparse signals. A theoretical proof analysis is derived regarding the reliability of the network coded symbol formed in the proposed protocol. The proposed protocol results in a better bit error rate (BER) performance in comparison to the direct implementation of CS on the EF protocol. Simulation results validate our analyses. Another hot topic is the application of relay technologies to the cellular networks. In this thesis, a practical two-way transmission scheme is proposed based on the EF protocol and the network coding technique. A trellis coded quantization/modulation (TCQ/M) scheme is used in the network coding process. The soft network coded symbols are quantized into only one bit thus requiring the same transmission bandwidth as the simplest decode-and-forward protocol. The probability density function of the network coded symbol is derived to help to form the quantization codebook for the TCQ. Simulations show that the proposed soft forwarding protocol can achieve full diversity with only a transmission rate of 1, and its BER performance is equivalent to that of an unquantized EF protocol