Active sensor fault tolerant output feedback tracking control for wind turbine systems via T-S model

This paper presents a new approach to active sensor fault tolerant tracking control (FTTC) for offshore wind turbine (OWT) described via Takagi–Sugeno (T–S) multiple models. The FTTC strategy is designed in such way that aims to maintain nominal wind turbine controller without any change in both fault and fault-free cases. This is achieved by inserting T–S proportional state estimators augmented with proportional and integral feedback (PPI) fault estimators to be capable to estimate different generators and rotor speed sensors fault for compensation purposes. Due to the dependency of the FTTC strategy on the fault estimation the designed observer has the capability to estimate a wide range of time varying fault signals. Moreover, the robustness of the observer against the difference between the anemometer wind speed measurement and the immeasurable effective wind speed signal has been taken into account. The corrected measurements fed to a T–S fuzzy dynamic output feedback controller (TSDOFC) designed to track the desired trajectory. The stability proof with H∞ performance and D-stability constraints is formulated as a Linear Matrix Inequality (LMI) problem. The strategy is illustrated using a non-linear benchmark system model of a wind turbine offered within a competition led by the companies Mathworks and KK-Electronic

Modeling and Lyapunov-designed based on adaptive gain sliding mode control for wind turbines

In this paper, modeling and the Lyapunov-designed control approach are studied for the Wind Energy Conversion Systems (WECS). The objective of this study is to ensure the maximum energy production of a WECS while reducing the mechanical stress on the shafts (turbine and generator). Furthermore, the proposed control strategy aims to optimize the wind energy captured by the wind turbine operating under rating wind speed, using an Adaptive Gain Sliding Mode Control (AG-SMC). The adaptation for the sliding gain and the torque estimation are carried out using the sliding surface as an improved solution that handles the conventional sliding mode control. Furthermore, the resultant WECS control policy is relatively simple, meaning the online computational cost and time are considerably reduced. Time-domain simulation studies are performed to discuss the effectiveness of the proposed control strateg

Maximum power point tracking for variable-speed fixed-pitch small wind turbines

Variable-speed, fixed-pitch wind turbines are required to optimize power output performance without the aerodynamic controls. A wind turbine generator system is operated such that the optimum points of wind rotor curve and electrical generator curve coincide. In order to obtain maximum power output of a wind turbine generator system, it is necessary to drive the wind turbine at an optimal rotor speed for a particular wind speed. In fixed-pitch variablespeed wind turbines, wind-rotor performance is fixed and the restoring torque of the generator needs to be adjusted to maintain optimum rotor speed at a particular wind speed for maximum aerodynamic power output. In turbulent wind environment, control of wind turbine systems to continuously operate at the maximum power points becomes difficult due to fluctuation of wind speeds. Therefore, special emphasis is given to operating at maximum aerodynamic power points of wind rotor. In this paper, the performance of a Fuzzy Logic Maximum Power Point Tracking (MPPT) controller is investigated for applications on variable-speed fixed-pitch small- scale wind turbines

Characterisation of large changes in wind power for the day-ahead market using a fuzzy logic approach

Wind power has become one of the renewable resources with a major growth in the electricity market. However, due to its inherent variability, forecasting techniques are necessary for the optimum scheduling of the electric grid, specially during ramp events. These large changes in wind power may not be captured by wind power point forecasts even with very high resolution Numerical Weather Prediction (NWP) models. In this paper, a fuzzy approach for wind power ramp characterisation is presented. The main benefit of this technique is that it avoids the binary definition of ramp event, allowing to identify changes in power out- put that can potentially turn into ramp events when the total percentage of change to be considered a ramp event is not met. To study the application of this technique, wind power forecasts were obtained and their corresponding error estimated using Genetic Programming (GP) and Quantile Regression Forests. The error distributions were incorporated into the characterisation process, which according to the results, improve significantly the ramp capture. Results are presented using colour maps, which provide a useful way to interpret the characteristics of the ramp events

Vertical wind profile characterization and identification of patterns based on a shape clustering algorithm

Wind power plants are becoming a generally accepted resource in the generation mix of many utilities. At the same time, the size and the power rating of individual wind turbines have increased considerably. Under these circumstances, the sector is increasingly demanding an accurate characterization of vertical wind speed profiles to estimate properly the incoming wind speed at the rotor swept area and, consequently, assess the potential for a wind power plant site. The present paper describes a shape-based clustering characterization and visualization of real vertical wind speed data. The proposed solution allows us to identify the most likely vertical wind speed patterns for a specific location based on real wind speed measurements. Moreover, this clustering approach also provides characterization and classification of such vertical wind profiles. This solution is highly suitable for a large amount of data collected by remote sensing equipment, where wind speed values at different heights within the rotor swept area are available for subsequent analysis. The methodology is based on z-normalization, shape-based distance metric solution and the Ward-hierarchical clustering method. Real vertical wind speed profile data corresponding to a Spanish wind power plant and collected by using a commercialWindcube equipment during several months are used to assess the proposed characterization and clustering process, involving more than 100000 wind speed data values. All analyses have been implemented using open-source R-software. From the results, at least four different vertical wind speed patterns are identified to characterize properly over 90% of the collected wind speed data along the day. Therefore, alternative analytical function criteria should be subsequently proposed for vertical wind speed characterization purposes.The authors are grateful for the financial support from the Spanish Ministry of the Economy and Competitiveness and the European Union —ENE2016-78214-C2-2-R—and the Spanish Education, Culture and Sport Ministry —FPU16/042

Uncertainty Analysis of the Adequacy Assessment Model of a Distributed Generation System

Due to the inherent aleatory uncertainties in renewable generators, the reliability/adequacy assessments of distributed generation (DG) systems have been particularly focused on the probabilistic modeling of random behaviors, given sufficient informative data. However, another type of uncertainty (epistemic uncertainty) must be accounted for in the modeling, due to incomplete knowledge of the phenomena and imprecise evaluation of the related characteristic parameters. In circumstances of few informative data, this type of uncertainty calls for alternative methods of representation, propagation, analysis and interpretation. In this study, we make a first attempt to identify, model, and jointly propagate aleatory and epistemic uncertainties in the context of DG systems modeling for adequacy assessment. Probability and possibility distributions are used to model the aleatory and epistemic uncertainties, respectively. Evidence theory is used to incorporate the two uncertainties under a single framework. Based on the plausibility and belief functions of evidence theory, the hybrid propagation approach is introduced. A demonstration is given on a DG system adapted from the IEEE 34 nodes distribution test feeder. Compared to the pure probabilistic approach, it is shown that the hybrid propagation is capable of explicitly expressing the imprecision in the knowledge on the DG parameters into the final adequacy values assessed. It also effectively captures the growth of uncertainties with higher DG penetration levels

Optimal control of wind energy conversion systems with doubly-fed induction generators

Wind energy conversion systems (WECSs) have become the interesting topic over recent years for the renewable electrical power source. They are a more environmentally friendly and sustainable resource in comparison with the fossil energy resource. The WECS using a doubly-fed induction generator (DFIG) to convert mechanical power into electrical power has a significant advantage. This WECS requires a smaller power converter in comparison with a squirrel cage induction generator. Efficiency of the DFIG-WECS can be improved by a suitable control system to maximise the output power from WECS. A maximum power point tracking (MPPT) controller such as tip-speed ratio (TSR)control and power signal feedback (PSF) control is use to maximise mechanical power from wind turbine and a model-based loss minimisation control (MBLC) is used to minimise electrical losses of the generator. However, MPPT and MBLC require the parameters of the wind turbine and the generator for generating the control laws like optimal generator speed reference and d-axis rotor current reference. The Efficiencies of the MPPT and MBLC algorithms deteriorate when wind turbine and generator parameters change from prior knowledge. The field oriented control for a DFIG in the WECS is extended by introducing a novel control layer generating online optimal generator speed reference and d-axis rotor current reference in order to maximise power produced from the WECS under wind turbine and DFIG parameter uncertainties, which is proposed. The single input rule modules (SIRMs) connected fuzzy inference model is applied to the control algorithm for optimal power control for variable-speed fixed-pitch wind turbine in the whole wind speed range by generating an online optimal speed reference to achieve optimal power under wind turbine parameter uncertainties. The proposed control combines a hybrid maximum power point tracking (MPPT) controller, a constant rotational speed controller for below-rated wind speed and a limited-power active stall regulation by rotational speed control for above-rated wind speed. The three methods are appropriately organised via the fuzzy controller based SIRMs connected fuzzy inference model to smooth transition control among the three methods. The online parameter estimation by using Kalman filter is applied to enhance model-based loss minimisation control (MBLC). The d-axis rotor current reference of the proposed MBLC can adapt to the accurate determination of the condition of minimum electrical losses of the DFIG when the parameters of the DFIG are uncertain. The proposed control algorithm has been verified by numerical simulations in Matlab/Simulink and it has been demonstrated that the energy generated for typical wind speed profiles is greater than that of a traditional control algorithm based on PSF MPPT and MBLC

MPPT Control Methods in Wind Energy Conversion Systems

Wind energy conversion systems have been attracting wide attention as a renewable energy source due to depleting fossil fuel reserves and environmental concerns as a direct consequence of using fossil fuel and nuclear energy sources. Wind energy, even though abundant, varies continually as wind speed changes throughout the day. The amount of power output from a wind energy conversion system (WECS) depends upon the accuracy with which the peak power points are tracked by the maximum power point tracking (MPPT) controller of the WECS control system irrespective of the type of generator used. This study provides a review of past and present MPPT controllers used for extracting maximum power from the WECS using permanent magnet synchronous generators (PMSG), squirrel cage induction generators (SCIG) and doubly fed induction generator (DFIG). These controllers can be classified into three main control methods, namely tip speed ratio (TSR) control, power signal feedback (PSF) control and hill-climb search (HCS) control. The chapter starts with a brief background of wind energy conversion systems. Then, main MPPT control methods are presented, after which, MPPT controllers used for extracting maximum possible power in WECS are presented