Deploying the ICT architecture of a residential demand response pilot

The Flemish project Linear was a large scale residential demand response pilot that aims to validate innovative smart grid technology building on the rollout of information and communication technologies in the power grid. For this pilot a scalable, reliable and interoperable ICT infrastructure was set up, interconnecting 240 residential power grid customers with the backend systems of energy service providers (ESPs), flexibility aggregators, distribution system operators (DSOs) and balancing responsible parties (BRPs). On top of this architecture several business cases were rolled out, which require the sharing of metering data and flexibility information, and demand response algorithms for the balancing of renewable energy and the mitigation of voltage and power issues in distribution grids. The goal of the pilot is the assessment of the technical and economical feasibility of residential demand response in real life, and of the interaction with the end-consumer. In this paper we focus on the practical experiences and lessons learnt during the deployment of the ICT technology for the pilot. This includes the real-time gathering of measurement data and real-time control of a wide range of smart appliances in the homes of the participants. We identified a number of critical issues that need to be addressed for a future full-scale roll-out: (i) reliable in-house communication, (ii) interoperability of appliances, measurement equipment, backend systems, and business cases, and (iii) sufficient backend processing power for real-time analysis and control

A Widespread Review of Smart Grids Towards Smart Cities

© 2019 by the authorsNowadays, the importance of energy management and optimization by means of smart devices has arisen as an important issue. On the other hand, the intelligent application of smart devices stands as a key element in establishing smart cities, which have been suggested as the solution to complicated future urbanization difficulties in coming years. Considering the scarcity of traditional fossil fuels in the near future, besides their ecological problems the new smart grids have demonstrated the potential to merge the non-renewable and renewable energy resources into each other leading to the reduction of environmental problems and optimizing operating costs. The current paper clarifies the importance of smart grids in launching smart cities by reviewing the advancement of micro/nano grids, applications of renewable energies, energy-storage technologies, smart water grids in smart cities. Additionally a review of the major European smart city projects has been carried out. These will offer a wider vision for researchers in the operation, monitoring, control and audit of smart-grid systems.publishedVersio

A Semi-Distributed Electric Demand-Side Management System with PV Generation for Self-Consumption Enhancement

This paper presents the operation of an Electrical Demand-Side Management (EDSM) system in a real solar house. The use of EDSM is one of the most important action lines to improve the grid electrical efficiency. The combination between the EDSM and the PV generation performs a new control level in the local electric behavior and allows new energy possibilities. The solar house used as test-bed for the EDSM system owns a PV generator, a lead-acid battery storage system and a grid connection. The electrical appliances are controllable from an embedded computer. The EDSM is implemented by a control system which schedules the tasks commanded by the user. By using the control system, we define the house energy policy and improve the energy behavior with regard to a selected energy criterion, self-consumption. The EDSM system favors self-consumption with regard to a standard user behavior and reduces the energy load from the grid

Reducing Grid Distortions Utilizing Energy Demand Prediction and Local Storages

© 2021 The Author(s). This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/.Energy storage systems will play a key role in the establishment of future smart grids. Specifically, the integration of storages into the grid architecture serves several purposes, including the handling of the statistical variation of energy supply through increasing usage of renewable energy sources as well as the optimization of the daily energy usage through load scheduling. This article is focusing on the reduction of the grid distortions using non-linear convex optimization. In detail an analytic storage model is used in combination with a load forecasting technique based on socio-economic information of a community of households. It is shown that the proposed load forecasting technique leads to significantly reduced forecasting errors (relative reductions up-to 14.2%), while the proposed storage optimization based on non-linear convex optimizations leads to 12.9% reductions in terms of peak to average values for ideal storages and 9.9% for storages with consideration of losses respectively. Furthermore, it was shown that the largest improvements can be made when storages are utilized for a community of households with a storage size of 4.6-8.2 kWh per household showing the effectiveness of shared storages as well as load forecasting for a community of households.Peer reviewe

Energy use in residential buildings: Impact of building automation control systems on energy performance and flexibility

This work shows the results of a research activity aimed at characterizing the energy habits of Italian residential users. In detail, by the energy simulation of a buildings sample, the opportunity to implement a demand/response program (DR) has been investigated. Italian residential utilities are poorly electrified and flexible loads are low. The presence of an automation system is an essential requirement for participating in a DR program and, in addition, it can allow important reductions in energy consumption. In this work the characteristics of three control systems have been defined, based on the services incidence on energy consumptions along with a sensitivity analysis on some energy drivers. Using the procedure established by the European Standard EN 15232, the achievable energy and economic savings have been evaluated. Finally, a financial analysis of the investments has been carried out, considering also the incentives provided by the Italian regulations. The payback time is generally not very long: depending on the control system features it varies from 7 to 10 years; moreover, the automation system installation within dwellings is a relatively simple activity, which is characterized by a limited execution times and by an initial expenditure ranging in 1000 € to 4000 €, related to the three sample systems

DC Power Line Communication (PLC) on 868 MHz and 2.4 GHz Wired RF Transceivers

Efficient management through monitoring of Li-ion batteries is critical to the progress of electro-mobility and energy storage globally, since the technology can be hazardous if pushed beyond its safety boundaries. Battery management systems (BMSs) are being actively improved to reduce size, weight, and cost while increasing their capabilities. Using power line communication, wireless monitoring, or hybrid data links are one of the most advanced research directions today. In this work, we propose the use of radio frequency (RF) transceivers as a communication unit that can deliver both wired and wireless services, through their superior analog and digital signal processing capability compared to PLC technology. To validate our approach computational simulation and empirical evaluation was conducted to examine the possibility of using RF transceivers on a direct current (DC) bus for wired BMS. A key advantage of this study is that it proposes a flexible and tested system for communication across a variety of network scenarios, where wireless data links over disrupted connections may be enabled by using this technology in short-range wired modes. This investigation demonstrates that the IEEE 802.15.4-compliant transceivers with operating frequencies of 868 MHz and 2.4 GHz can establish stable data links on a DC bus via capacitive coupling at high data rates