Analysis of Galileo E5 and E5ab code tracking

The world of global navigation satellite systems has been enhanced with several new or improved signals in space aiming to optimize accuracy, reliability, navigation solution, and interoperability between different constellations. However, such developments bring various challenges to the receivers' designers. For example, acquisition and tracking stages turn into more complex processes while handling the increasing bandwidth requires additional processing power. In this context, we study the code tracking of Galileo E5ab in a full band or of only one of its components, i.e., either E5a or E5b. More specifically, an architecture for tracking the E5 pilot channel as an AltBOC(15,10) or BPSK(10) modulation is introduced, and the performance of well-known discriminator types is analyzed using analytical derivations and simulations of linearity and stability regions, thermal noise tracking errors, multipath error envelopes and tracking thresholds. Different parameters, such as the front-end filter bandwidth, the early/late chip spacing, un-normalized and normalized discriminators, are taken into consideration. The results obtained are used to illustrate the main advantages and drawbacks of tracking the E5 signal as well as to help defining the main tracking loop parameters for an enhanced performanc

Positioning Performance Limits of GNSS Meta-Signals and HO-BOC Signals

Global Navigation Satellite Systems (GNSS) are the main source of position, navigation, and timing (PNT) information and will be a key player in the next-generation intelligent transportation systems and safety-critical applications, but several limitations need to be overcome to meet the stringent performance requirements. One of the open issues is how to provide precise PNT solutions in harsh propagation environments. Under nominal conditions, the former is typically achieved by exploiting carrier phase information through precise positioning techniques, but these methods are very sensitive to the quality of phase observables. Another option that is gaining interest in the scientific community is the use of large bandwidth signals, which allow obtaining a better baseband resolution, and therefore more precise code-based observables. Two options may be considered: (i) high-order binary offset carrier (HO-BOC) modulations or (ii) the concept of GNSS meta-signals. In this contribution, we assess the time-delay and phase maximum likelihood (ML) estimation performance limits of such signals, together with the performance translation into the position domain, considering single point positioning (SPP) and RTK solutions, being an important missing point in the literature. A comprehensive discussion is provided on the estimators’ behavior, the corresponding ML threshold regions, the impact of good and bad satellite constellation geometries, and final conclusions on the best candidates, which may lead to precise solutions under harsh conditions. It is found that if the receiver is constrained by the receiver bandwidth, the best choices are the L1-M or E6-Public Regulated Service (PRS) signals. If the receiver is able to operate at 60 MHz, it is recommended to exploit the full-bandwidth Galileo E5 signal. In terms of robustness and performance, if the receiver can operate at 135 MHz, the best choice is to use the GNSS meta-signals E5 + E6 or B2 + B3, which provide the best overall performances regardless of the positioning method used, the satellite constellation geometry, or the propagation conditions

Galileo AltBOC receivers - Analysis of receiver architectures, acquisition strategies and multipath mitigation techniques for the E5 AltBOC signal

Master of Science Thesi

Analysis of Galileo E5 and E5ab code tracking

The world of global navigation satellite systems has been enhanced with several new or improved signals in space aiming to optimize accuracy, reliability, navigation solution, and interoperability between different constellations. However, such developments bring various challenges to the receivers’ designers. For example, acquisition and tracking stages turn into more complex processes while handling the increasing bandwidth requires additional processing power. In this context, we study the code tracking of Galileo E5ab in a full band or of only one of its components, i.e., either E5a or E5b. More specifically, an architecture for tracking the E5 pilot channel as an AltBOC(15,10) or BPSK(10) modulation is introduced, and the performance of well-known discriminator types is analyzed using analytical derivations and simulations of linearity and stability regions, thermal noise tracking errors, multipath error envelopes and tracking thresholds. Different parameters, such as the front-end filter bandwidth, the early/late chip spacing, un-normalized and normalized discriminators, are taken into consideration. The results obtained are used to illustrate the main advantages and drawbacks of tracking the E5 signal as well as to help defining the main tracking loop parameters for an enhanced performance

Multipath Propagation, Mitigation and Monitoring in the Light of Galileo and the Modernized GPS

Among the numerous potential sources of GNSS signal degradation, multipath takes on a prominent position. Unlike other errors like ionospheric or tropospheric path delays which can be modeled or significantly reduced by differential techniques, multipath influences cannot be mitigated by such approaches. Although a lot of multipath mitigation techniques have been proposed and developed in the past among them many receiver internal approaches using special signal processing algorithms multipath (especially multipath with small geometric path delays) still remains a major error source. This is why multipath has been a major design driver for the definition of the Galileo signal structure carried out in the past years and the subsequent signal optimization activities. This thesis tries to provide a broad and comprehensive insight into various aspects of multipath propagation, mitigation and monitoring (without claiming to be exhaustive). It contains an overview of the most important aspects of multipath propagation, including the discussion of different types of multipath signals (e.g. specular vs. diffuse multipath, satellite vs. receiver multipath or hardware-induced multipath), typical characteristics such as periodic signal variations whose frequency depends on the satellite-antenna-reflector geometry and the impact on the signal tracking process within a GNSS receiver. A large part of this thesis is dedicated to aspects of multipath mitigation, first providing a summary of the most common multipath mitigation techniques with a special focus on receiver-internal approaches such as the narrow correlation technique, double-delta correlator implementations, the Early-Late Slope (ELS) technique or Early/Early tracking implementations. However, other mitigation approaches such as using arrays of closely spaced antennas or multipath-limiting antennas are discussed as well. Some of these techniques are used for subsequent multipath performance analyses considering signals of the (modernized) GPS and Galileo. These analyses base on a new methodology to estimate typical and meaningful multipath errors making use of multipath error envelopes that are scaled in a suitable way to account for different multipath environments. It will be shown that typical (mean) multipath errors can be derived from these scaled envelopes by computation of the envelopes running average and that these mean multipath errors are of the same order as multipath errors obtained from complex statistical channel models. Another part of this thesis covers various aspects of multipath detection and monitoring. First, current techniques for multipath detection and monitoring are described and discussed with respect to their benefits and drawbacks or their real-time capability. Among the considered approaches are techniques like code minus carrier monitoring, SNR monitoring, the use of differenced observations or spectral and wavelet analysis. Following this introductory overview, a completely new approach for real-time multipath monitoring by processing multi-correlator observations will be introduced. Previously being used primarily for the detection of Evil Waveforms (signal failures that originate from a malfunction of the satellites signal generation and transmission hardware), the same basic observations (linear combinations of correlator outputs) can be used for the development of a multi-correlator-based real-time multipath monitoring system. The objective is to provide the user with instant information whether or not a signal is affected by multipath. The proposed monitoring scheme has been implemented in the form of a Matlab-based software called RTMM (Real-Time Multipath Monitor) which has been used to verify the monitoring approach and to determine its sensitivity.Die Qualität eines Satellitensignals wird durch eine Vielzahl potenzieller Fehlerquellen negativ beeinflusst. Neben atmosphärischen Einflüssen tragen Mehrwegeeinflüsse einen wesentlichen Anteil zum Gesamtfehlerbudget der Satellitennavigation bei. Während eine ganze Reihe von Fehlereinflüssen durch geeignete Modellierung oder differenzielle Verfahren deutlich reduziert werden können, ist dies durch die räumliche Dekorrelation der Mehrwegeeffekte nicht möglich. Obwohl in der Vergangenheit eine Vielzahl von Verfahren zur Mehrwegereduzierung vorgeschlagen und entwickelt wurden, stellen Mehrwegesignale noch immer eine wesentliche, stets zu berücksichtigende Fehlerquelle dar. Aus diesem Grund spielten die zu erwartenden Mehrwegefehler auch eine sehr wichtige Rolle im Zuge der Definition sowie der Optimierung der Galileo-Signalstruktur und können somit als wesentliches Design-Kriterium angesehen werden. Die vorliegende Arbeit gibt einen umfassenden Einblick in verschiedene Aspekte der Mehrwegeausbreitung, -reduzierung sowie der Detektion und der Überwachung auftretender Mehrwegeeffekte. Die Arbeit beschreibt zunächst die wichtigsten Aspekte der Mehrwegeausbreitung, wobei beispielsweise unterschiedliche Arten von Reflexionen oder unterschiedliche Entstehungsarten ebenso diskutiert werden wie typische Auswirkungen von Mehrwegesignalen wie die Entstehung periodischer Signalvariationen. Solche Signalvariationen sind in starkem Maße abhängig von der durch die Satellitenposition, dem Antennenstandpunkt und der Lage des Reflexionspunktes definierten Geometrie. Die Frequenz dieser Signalvariationen wird für unterschiedliche geometrische Verhältnisse berechnet. Zudem werden der Einfluss bzw. die Auswirkungen einer Mehrwegeausbreitung auf den Signalverarbeitungsprozess in einem GNSS Empfänger aufgezeigt. Einen weiteren Schwerpunkt dieser Arbeit bilden die derzeit gebräuchlichen Methoden zur Reduzierung von Mehrwegeeinflüssen. Dabei werden zunächst die wichtigsten empfängerinternen Ansätze vorgestellt. Aber auch Methoden wie die Verwendung von Antennenarrays oder spezieller Antennen bleiben nicht unberücksichtigt. Einige dieser Methoden bilden im Folgenden die Grundlage für die Bestimmung von typischen Mehrwegefehlern. Dazu wird eine neuartige Methodik vorgestellt, um aus Hüllkurven des Mehrwegefehlers aussagekräftige mittlere Mehrwegefehler zu bestimmen. Hierzu werden die Hüllkurven mit Hilfe einiger aus statistischen Kanalmodellen abgeleiteter Parameter in geeigneter Weise skaliert, um unterschiedlichen Mehrwegeumgebungen Rechnung zu tragen. Es wird gezeigt, dass die mit Hilfe dieser relativ einfachen und effizienten Methode ermittelten Mehrwegefehler in derselben Größenordnung liegen wie die aus komplexen statistischen Kanalmodellen ermittelten Fehler. Einen weiteren Themenkomplex stellen Methoden zur Detektion und zum Monitoring von Mehrwegeeinflüssen dar. Dabei werden zunächst derzeit verwendete Ansätze vorgestellt und hinsichtlich ihrer Vor- und Nachteile sowie hinsichtlich ihrer Echtzeitfähigkeit diskutiert. In Anschluss daran wird ein neuartiger Ansatz zur Detektion und zum Monitoring von Mehrwegesignalen in Echtzeit vorgestellt, der auf der Auswertung von Multikorrelatorbeobachtungen basiert. Ziel dieser Entwicklung ist es, einen potenziellen Nutzer sofort darüber informieren zu können, wenn ein Signal mit Mehrwegefehlern behaftet ist. Der vorgeschlagene Ansatz wurde in Form einer Matlab-basierten implementiert, welche im Folgenden zur Verifizierung und zur Bestimmung der Empfindlichkeit des Verfahrens verwendet wird

Security Evaluation of GNSS Signal Quality Monitoring Techniques against Optimal Spoofing Attacks

GNSSs have a significant impact on everyday life and, therefore, the are increasingly becoming an attractive target for illicit exploitation. As such, anti-spoofing algorithms have become an relevant research topic within the GNSS discipline. This Thesis provides a review of recent research in the field of GNSS spoofing/anti-spoofing, designs a method to generate an energy optimal spoofing signal and evaluates the performance of the anti-spoofing signal quality monitoring techniques against it

Universal-SBAS: A worldwide multimodal standard

This paper describes a generalisation of the aeronautical GNSS Space Based Augmentation System (SBAS) air interface, in a true worldwide multimodal standard named Universal S-BAS. Examples of usages of this multifrequency future standard are presented in the area of science and precise positioning, timing, security, robust positioning, maritime and reflectometry applications

Delay Trackers for Galileo CBOC Modulated Signals and Their Simulink-based Implementations

Galileo will be the future European Global Navigation Satellite Systems (GNSSs), which is going to provide high availability, increased accuracy and various location services. This new satellite system proposes the use of a new modulation, namely the Composite Binary Offset Carrier (CBOC) modulation, which motivates the research on GNSS receiver with this new modulation. Code tracking is one of the main functions in a GNSS receiver and its task is to give an accurate estimation of the code delay. The accuracy of this code delay estimation is strictly connected with the accuracy of user position computation. One typical code tracking structure is the code tracking loop. The code tracking algorithms or delay trackers used in code tracking loop are the main aspect, which affects the performance of code tracking loop. Various typical delay trackers are studied in this thesis. Simulation is one important issue in the design and analysis of any communication system or navigation system. One method for testing delay trackers and effects from different tracking algorithms can be realized in the simulation tool, such as a software receiver. The simulation tool makes it convenient to test various algorithms used in the receiver and to investigate the receiver performance before the algorithms are built in the real devices. On the other hand, the implementation of delay trackers in a software receiver can be also helpful for further developing the simulation tool. The goal of this thesis has been to develop and analyze the implementations of various code delay trackers for Galileo systems via Simulink tool. The analysis has also helped to further develop the model in order to include realistic receiver constraints for mass-market application. The performance of the delay trackers is measured in terms of Root Mean Square Error (RMSE), tracking error variance and Multipath Error Envelopes (MEEs). /Kir1

Performance of precise marine positioning using future modernised global satellite positioning systems and a novel partial ambiguity resolution technique

The International Maritime Organisation (IMO) established a set of positioning requirements for future Global Navigation Satellite System (GNSS) constellations in IMO resolution A.915. It is important to be able to determine if these requirements can be met, and what shore infrastructure would be required. This thesis describes the collection of data in a marine environment and the analysis of these data with regards to the requirements. The data collection exercise was held at the beginning of May 2008 and saw THV Alert navigate into Harwich Harbour whilst Global Positioning System (GPS) observation data were recorded from onboard the vessel and from shore-based reference stations. Additional data were obtained from nearby Ordnance Survey reference stations, and two total stations were used to track the vessel’s passage to provide a truth model. Several modernised GPS satellites were tracked. The data were processed under different scenarios, using software developed at UCL, and the positioning performance was analysed in the context of the IMO requirements. Potential performance improvements from modernised GPS and Galileo were then discussed. Providing integrity through single-epoch real-time kinematic positioning, required to meet the strictest IMO requirements, is particularly difficult. The identification of phase observation outliers is not possible before the integer ambiguities are resolved, but an undetected outlier could prevent successful ambiguity resolution. It will not always be necessary to fix all the ambiguities to achieve the required positioning precision, particularly with a multi-GNSS constellation. This thesis introduces a new algorithm for partial ambiguity resolution in the presence of measurement bias. Although computationally intensive, this algorithm significantly improves the ambiguity resolution success rate, increasing the maximum baseline length over which the highest requirements are met with dual-frequency GPS from 1 km to 66 km