Advanced Connection Allocation Techniques in Circuit Switching Network on Chip

With the advancement of semiconductor technology, the System on Chip (SoC) is becoming more and more complex, so the on-chip communication has become a bottleneck of SoC Design. Since the traditional bus system is inefficient and not scalable, the Network-On-Chip (NoC) has emerged as the promising communication mechanism for complex SoCs. As some systems have specific performance requirements, such as a minimum throughput (for real-time streaming data) or bounded latency (for interrupts, process synchronization, etc), communication with Guaranteed Service (GS) support becomes crucial for predictable SoC architectures. Circuit Switching (CS) is a popular approach to support GS, which firstly has to allocate an exclusively connection (circuit) between the source and destination nodes, and then the data packets are delivered over this connection. However, it is inefficient and inflexible because the resource is occupied by single connection during its whole lifetime, which can block other communications. Hence, two extensions of CS have been proposed to share resources: i) Time-Division Multiplexing (TDM), in which the available link capacity is split into multiple time slots to be shared by different flows in TDM scheme; and ii) Space-Division-Multiplexing (SDM), in which only a subset (sub-channel) of the link wires is exclusively allocated to a specific connection, while the remaining wires of the link can be used by other flows. The connection allocation is critical for CS, since the data delivery can start only after the associated connection is allocated. In this thesis, we propose a dedicated hardware connection allocator to solve the dynamic connection allocation problem for CS NoCs, which has to i) allocate a contention-free path between source-destination pairs and ii) allocate appropriate portions of link bandwidth (appropriate number of time slots and subsets) along the path. The dedicated connection allocator, called NoCManager, solves the connection allocation problem by employing a trellis-search based shortest path algorithm. The trellis search can explore all possible paths between source node and destination. Moreover, it shall find the requested path in a fixed low latency and can guarantee the path optimality in terms of path length if the path is available. In this thesis, two different trellis graphs, Forward-Backtrack trellis and Register-Exchange trellis are proposed. The Forward-Backtrack trellis completes the path search in two steps: forward search and backtracking. Firstly, the forward search begins at source node that traverses the network to find the free path. When destination node is reached, the backtrack starts from destination to select the survivor path and collect the associated path parameters. However, Register-Exchange trellis saves the entire survivor path sequences during forward search. Consequently, the backtracking step can be omitted, and thus the allocation time is halved compared to forward-backtrack approaches. Moreover, each trellis graph consists of three categories, unfolded structure, folded structure and bidirectional structure. The unfolded structure can provide high allocation speed while folded structure is more efficient from a hardware point of view. The bidirectional structure starts the search at two sides, source node and destination node simultaneously, so the allocation speed is 2 times faster than previous unidirectional search. Furthermore, in order to address the scalability issue of previous centralized systems, the partitioned architecture (i.e. spatial partitioning technique) is proposed to divide the large system into multiple smaller differentiated logical partitions served by local NoCManagers. This partitioning technique keeps the request load of the manager and manager-node communication overhead moderate. Inside each partition, the path search problem is solved by a local manager with trellis-search algorithm. To establish a path that crosses partitions, the managers communicate with each other in distributed manner to converge the global path. In order to further enhance the path diversity and resource utilization, we adopt the combined TDM and SDM technique. In combined TDM-SDM approach, each SDM sub-channel is split into multiple time slots so that can be shared by multiple flows. Hence, the number of sub-channels can be kept moderate to reduce router complexity, while still providing higher path diversity than TDM scheme. In order to investigate and optimize TDM-SDM partitioning strategy, we studied the influence of different TDM-SDM link partitioning strategies on success rate and path length that allowed us to find the optimal solution. The dedicated connection allocator using the trellis-search algorithm is employed for TDM, SDM and TDM-SDM CS. In the end, we present the router architecture that combines the circuit-switching network (for GS communication) and packet-switching network (for best-effort communication)

Efficient Connection Allocator in Network-on-Chip

As semiconductor technologies develop, a System-on-Chip (SoC) that integrates all semiconductor intellectual property (IP) cores is suggested and widely used for various applications. A traditional bus interconnection does not support transmitting data between IP cores for high performance. Because of this reason, a Network-on-Chip (NoC) has been suggested to provide an efficient and scalable solution to interconnect among all IP cores. High throughput and low latency have recently become the main important factors of NoC for achieving hard guaranteed real-time systems. In order to guarantee these factors and provide real-time service (i.e., Guaranteed Service, GS), the circuit switching (CS) approach has been widely utilized. The CS approach allocates mutually exclusive paths to transmitting data between different sources and destinations using dedicated NoC resources. However, the exclusive occupancy of the allocated path reduces the efficiency of the overall use of NoC resources. In order to solve this problem, Space-Division-Multiplexing (SDM) and Time-Division-Multiplexing (TDM) techniques have been suggested. SDM implements a circuit switching technique by assigning physically different NoC-links between different connections. Path connections of the SDM technique based on spatial resources assignment do not provide high scalability. In contrast to this, using virtual time slots for a path connection, the TDM technique can share physical links between exclusively established connections, thereby improving NoC path diversity. For all of these mentioned techniques, the factor that significantly impacts the system efficiency or performance scaling is how the path is allocated. In recent years, a dynamic connection allocation approach that can cope with highly dynamic workloads has been gaining attention due to the sudden and diverse demands of applications in real-time systems. There are two groups in the dynamic connection allocation approach. One is a distributed allocation technique, and the other is a centralized allocation technique. While distributed allocation exploits additional logic integrated into the NoC-routers for path search and allocation, the centralized approach makes use of a central unit to manage the path allocation problem. There are several algorithms for the centralized allocation technique. Trellis search-based allocation approach shows the best performance among them. Many algorithms related to centralized connection allocators have been studied extensively during the past decade. However, relatively little attention was paid to methodology in analyzing and evaluating the centralized connection allocation algorithms. In order to further develop the algorithms, it is necessary to understand and evaluate the centralized connection allocator by establishing a new analysis methodology. Thus, this thesis presents a performance analysis methodology for the trellis search-based allocation approach. Firstly, this thesis proposes a system model for analysis. Secondly, performance metrics are defined. Finally, the analysis results of each performance metric related to the trellis search-based allocation approach are presented. Through this analysis, the performance of the trellis search-based allocation approach can be accurately analyzed. Although a simulation is not performed, the upper limit of performance of the trellis search-based allocation approach can also be predicted through the analysis metrics. Additionally, we introduce the general formulation of the trellis search-based path allocation algorithm. The weight values among available paths through the branch metric and path metric are proposed to enable higher performance path connection. Furthermore, according to network size, topology, TDM, interface load delivery, and router internal storage, the performance of trellis search-based path allocation algorithms is also described. In the end, the Application Specific Instruction Processor (ASIP) hardware platform customized for the trellis search-based path allocation algorithm is presented. The shortest available and lowest-cost (SALC) path search algorithm is proposed to improve the success rate of path connection in the ASIP hardware platform. We evaluate the algorithm performance and implementation synthesis results. In order to realize the dynamic connection approach, a short execution cycle of ASIP time is essential. We develop several algorithms to achieve this short execution cycle. The first one is a rectangular region of search algorithm that allows adapting the size and form of path search region according to the particular source-destination positions and considers actual operational constraints. The average execution cycles for searching an optimum path are decreased because the unnecessary region for path-search is excluded. The second one is a path-spreading search algorithm that separates between involved routers and uninvolved routers in path search. The involved routers are selected and spread out from source to destination at each intermediate trellis-search process. The path-search overhead is considerably reduced due to the router involvements. The third one is a three-directional path-spreading search algorithm that eliminates one direction movement among four spreading movements. Because of this reason, the trellis search-based path connection algorithm, which omits the back-tracing process, can be implemented in the ASIP platform. Thus, the whole algorithm execution time can be halved. The last one is a moving regional path search algorithm that significantly reduces computation complexity by selecting a constant dimensional path-search region that affects performance and moving the region from source to destination. The moving regional path search algorithm achieves a considerable decrement of computational complexity.:1 Introduction 1 1.1 NoC-interconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Thesis outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Connection allocation in a Network-on-Chip 7 2.1 Circuit Switching NoCs . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1.1 Guaranteed Service in NoCs . . . . . . . . . . . . . . . . . . . 7 2.1.2 Spatial-Division-Multiplexing technique . . . . . . . . . . . . 8 2.1.3 Time-Division-Multiplexing technique . . . . . . . . . . . . . 10 2.2 System architectures employing circuit switching NoCs . . . . . . . . 11 2.2.1 Static and dynamic connection allocation . . . . . . . . . . . 12 2.2.2 Distributed connection allocation technique . . . . . . . . . . 14 2.2.3 Centralized connection allocation technique . . . . . . . . . . 16 2.2.4 Algorithms for centralized connection allocation . . . . . . . . 17 2.2.4.1 Software based run-time path allocation approach . 18 2.2.4.2 Trellis search-based allocation approach . . . . . . . 19 3 Performance analysis methodology for a centralized connection allocator 23 3.1 System model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.2 Performance metrics and analysis methodology . . . . . . . . . . . . 25 3.3 System simulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4 Trellis search-based path allocation algorithm 45 4.1 General formulation . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 4.1.1 Trellis graph structure . . . . . . . . . . . . . . . . . . . . . . 45 4.1.2 Survivor path selection criterion . . . . . . . . . . . . . . . . . 52 ix 4.1.2.1 Branch metric and path metric . . . . . . . . . . . . 52 4.1.2.2 The shortest-available and lowest-cost path selection criterion . . . . . . . . . . . . . . . . . . . . . . . . . 53 4.2 Algorithm Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 4.2.1 Network topology . . . . . . . . . . . . . . . . . . . . . . . . 55 4.2.2 Network size . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 4.2.3 Time-Division-Multiplexing . . . . . . . . . . . . . . . . . . . 61 4.2.4 NoC interface load diversity . . . . . . . . . . . . . . . . . . . 63 4.2.5 The internal storage of the router . . . . . . . . . . . . . . . . 66 5 ASIP approach for Trellis search-based connection allocation 73 5.1 System model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.1.1 Trellis search-based ASIP platform architecture . . . . . . . . 74 5.2 Algorithm for improving success rates of path connection . . . . . . . 81 5.2.1 SALC algorithm for Trellis search-based ASIP platform . . . . 81 5.2.2 Performance evaluation of the SALC algorithm . . . . . . . . 88 5.2.2.1 Simulation results . . . . . . . . . . . . . . . . . . . 88 5.2.2.2 Synthesis results . . . . . . . . . . . . . . . . . . . . 91 5.3 Algorithm for reducing path-search time . . . . . . . . . . . . . . . . 93 5.3.1 Rectangular regional path search algorithm . . . . . . . . . . 93 5.3.2 Path-spreading search algorithm . . . . . . . . . . . . . . . . 99 5.3.3 Three directional path-spreading search algorithm . . . . . . 108 5.3.4 Moving regional path search algorithm . . . . . . . . . . . . . 114 5.3.5 Performance evaluation . . . . . . . . . . . . . . . . . . . . . 123 5.3.5.1 Simulation results . . . . . . . . . . . . . . . . . . . 123 5.3.5.2 Synthesis results . . . . . . . . . . . . . . . . . . . . 126 6 Conclusion and Future work 131 6.1 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 6.2 Future work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Bibliography 13

Configuration as well asPerformance of an On-Chip IncarnationArrangement for Multiprocessor System-On-Chip

The novel on-chip coordinate in silicon indicated course of action to fortify ensured development change in multiprocessor SOC applications. A pipelined circuit-exchanging Employed in the proposed structure with FIFO strategy converged with a multistage system topology in segment way setup game plan. The runtime course strategy connected with by part way setup plan for subjective development changes adjacent the Error Correction Block (ECB). The circuit-exchanging technique offers the permuted information and its humbler overhead draws in the upside of stacking various structures in framework on chip. A CMOS test-chip with 0.13m insists the sound judgment and gainfulness of the proposed outline. The indicated exploratory result in the proposed on-chip system accomplishes 1.9x to 8.2x diminishment of silicon overhead emerged from other setup approaches

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.Siirretty Doriast

On Dynamic Monitoring Methods for Networks-on-Chip

Rapid ongoing evolution of multiprocessors will lead to systems with hundreds of processing cores integrated in a single chip. An emerging challenge is the implementation of reliable and efficient interconnection between these cores as well as other components in the systems. Network-on-Chip is an interconnection approach which is intended to solve the performance bottleneck caused by traditional, poorly scalable communication structures such as buses. However, a large on-chip network involves issues related to congestion problems and system control, for instance. Additionally, faults can cause problems in multiprocessor systems. These faults can be transient faults, permanent manufacturing faults, or they can appear due to aging. To solve the emerging traffic management, controllability issues and to maintain system operation regardless of faults a monitoring system is needed. The monitoring system should be dynamically applicable to various purposes and it should fully cover the system under observation. In a large multiprocessor the distances between components can be relatively long. Therefore, the system should be designed so that the amount of energy-inefficient long-distance communication is minimized. This thesis presents a dynamically clustered distributed monitoring structure. The monitoring is distributed so that no centralized control is required for basic tasks such as traffic management and task mapping. To enable extensive analysis of different Network-on-Chip architectures, an in-house SystemC based simulation environment was implemented. It allows transaction level analysis without time consuming circuit level implementations during early design phases of novel architectures and features. The presented analysis shows that the dynamically clustered monitoring structure can be efficiently utilized for traffic management in faulty and congested Network-on-Chip-based multiprocessor systems. The monitoring structure can be also successfully applied for task mapping purposes. Furthermore, the analysis shows that the presented in-house simulation environment is flexible and practical tool for extensive Network-on-Chip architecture analysis.Siirretty Doriast

Run-time management of many-core SoCs: A communication-centric approach

The single core performance hit the power and complexity limits in the beginning of this century, moving the industry towards the design of multi- and many-core system-on-chips (SoCs). The on-chip communication between the cores plays a criticalrole in the performance of these SoCs, with power dissipation, communication latency, scalability to many cores, and reliability against the transistor failures as the main design challenges. Accordingly, we dedicate this thesis to the communicationcentered management of the many-core SoCs, with the goal to advance the state-ofthe-art in addressing these challenges. To this end, we contribute to on-chip communication of many-core SoCs in three main directions. First, we start with a synthesizable SoC with full system simulation. We demonstrate the importance of the networking overhead in a practical system, and propose our sophisticated network interface (NI) that offloads the work from SW to HW. Our results show around 5x and up to 50x higher network performance, compared to previous works. As the second direction of this thesis, we study the significance of run-time application mapping. We demonstrate that contiguous application mapping not only improves the network latency (by 23%) and power dissipation (by 50%), but also improves the system throughput (by 3%) and quality-of-service (QoS) of soft real-time applications (up to 100x less deadline misses). Also our hierarchical run-time application mapping provides 99.41% successful mapping when up to 8 links are broken. As the final direction of the thesis, we propose a fault-tolerant routing algorithm, the maze-routing. It is the first-in-class algorithm that provides guaranteed delivery, a fully-distributed solution, low area overhead (by 16x), and instantaneous reconfiguration (vs. 40K cycles down time of previous works), all at the same time. Besides the individual goals of each contribution, when applicable, we ensure that our solutions scale to extreme network sizes like 12x12 and 16x16. This thesis concludes that the communication overhead and its optimization play a significant role in the performance of many-core SoC

Runtime Adaptive System-on-Chip Communication Architecture

The adaptive system provides adaptivity both in the system-level and in the architecture-level. The system-level adaptation is provided using a runtime application mapping. The architecture-level adaptation is implemented by using several novel methodologies to increase the resource utilization of the underlying silicon fabric, i.e. sharing the Virtual Channel Buffers among different output ports. To achieve successful runtime adaptation, a runtime observability infrastructure is included

Nascom System Development Plan: System Description, Capabilities and Plans

The NASA Communications (Nascom) System Development Plan (NSDP), reissued annually, describes the organization of Nascom, how it obtains communication services, its current systems, its relationship with other NASA centers and International Partner Agencies, some major spaceflight projects which generate significant operational communication support requirements, and major Nascom projects in various stages of development or implementation

Reducing Internet Latency : A Survey of Techniques and their Merit

Bob Briscoe, Anna Brunstrom, Andreas Petlund, David Hayes, David Ros, Ing-Jyh Tsang, Stein Gjessing, Gorry Fairhurst, Carsten Griwodz, Michael WelzlPeer reviewedPreprin