Relay Selection Strategies for Multi-hop Cooperative Networks

In this dissertation we consider several relay selection strategies for multi-hop cooperative networks. The relay selection strategies we propose do not require a central controller (CC). Instead, the relay selection is on a hop-by-hop basis. As such, these strategies can be implemented in a distributed manner. Therefore, increasing the number of hops in the network would not increase the complexity or time consumed for the relay selection procedure of each hop. We first investigate the performance of a hop-by-hop relay selection strategy for multi-hop decode-and-forward (DF) cooperative networks. In each relay cluster, relays that successfully receive and decode the message from the previous hop form a decoding set for relaying, and the relay which has the highest signal-to-noise ratio (SNR) link to the next hop is then selected for retransmission. We analyze the performance of this method in terms of end-to-end outage probability, and we derive approximations for the ergodic capacity and the effective ergodic capacity of this strategy. Next we propose a novel hop-by-hop relay selection strategy where the relay in the decoding set with the largest number of ``good\u27\u27 channels to the next stage is selected for retransmission. We analyze the performance of this method in terms of end-to-end outage probability in the case of perfect and imperfect channel state information (CSI). We also investigate relay selection strategies in underlay spectrum sharing cognitive relay networks. We consider a two-hop DF cognitive relay network with a constraint on the interference to the primary user. The outage probability of the secondary user and the interference probability at the primary user are analyzed under imperfect CSI scenario. Finally we introduce a hop-by-hop relay selection strategy for underlay spectrum sharing multi-hop relay networks. Relay selection in each stage is only based on the CSI in that hop. It is shown that in terms of outage probability, the performance of this method is nearly optimal

Performance of a Cognitive Relay Network under AF Relay Selection Scheme with Imperfect Channel Estimation

In this paper outage performance of a secondary user (SU) is evaluated under amplify and forward (AF) relay selection scheme with an imperfect channel state information (CSI)while sharing spectrum in an underlay cognitive radio network (CRN). In underlay, the SU coexists with primary user (PU) in the same band provided the interference produced by SU at the PU receiver is below the interference threshold of PU which limits the transmission power of SU and coverage area. Relays help to improve the performance of SU in underlay. However relays are also constrained in transmit power due to interference constraint imposed by PU. Closed form expression of the outage probability of SU with maximum transmit power constraint of relay under imperfect CSI is derived. A scaling factor based power control is used for the SU transmitter and the relay in order to maintain the interference constraint at PU receiver due to imperfect CSI. The impact of different parameters viz. correlation coefficient, channel estimation error, tolerable interference threshold, number of relays and the maximum transmit power constraint of relay on SU performance is investigated. A MATLAB based test bed has also been developed to carry out simulation in order to validate the theoretical result

Joint transceiver design and power optimization for wireless sensor networks in underground mines

Avec les grands développements des technologies de communication sans fil, les réseaux de capteurs sans fil (WSN) ont attiré beaucoup d’attention dans le monde entier au cours de la dernière décennie. Les réseaux de capteurs sans fil sont maintenant utilisés pour a surveillance sanitaire, la gestion des catastrophes, la défense, les télécommunications, etc. De tels réseaux sont utilisés dans de nombreuses applications industrielles et commerciales comme la surveillance des processus industriels et de l’environnement, etc. Un réseau WSN est une collection de transducteurs spécialisés connus sous le nom de noeuds de capteurs avec une liaison de communication distribuée de manière aléatoire dans tous les emplacements pour surveiller les paramètres. Chaque noeud de capteur est équipé d’un transducteur, d’un processeur de signal, d’une unité d’alimentation et d’un émetteur-récepteur. Les WSN sont maintenant largement utilisés dans l’industrie minière souterraine pour surveiller certains paramètres environnementaux, comme la quantité de gaz, d’eau, la température, l’humidité, le niveau d’oxygène, de poussière, etc. Dans le cas de la surveillance de l’environnement, un WSN peut être remplacé de manière équivalente par un réseau à relais à entrées et sorties multiples (MIMO). Les réseaux de relais multisauts ont attiré un intérêt de recherche important ces derniers temps grâce à leur capacité à augmenter la portée de la couverture. La liaison de communication réseau d’une source vers une destination est mise en oeuvre en utilisant un schéma d’amplification/transmission (AF) ou de décodage/transfert (DF). Le relais AF reçoit des informations du relais précédent et amplifie simplement le signal reçu, puis il le transmet au relais suivant. D’autre part, le relais DF décode d’abord le signal reçu, puis il le transmet au relais suivant au deuxième étage s’il peut parfaitement décoder le signal entrant. En raison de la simplicité analytique, dans cette thèse, nous considérons le schéma de relais AF et les résultats de ce travail peuvent également être développés pour le relais DF. La conception d’un émetteur/récepteur pour le relais MIMO multisauts est très difficile. Car à l’étape de relais L, il y a 2L canaux possibles. Donc, pour un réseau à grande échelle, il n’est pas économique d’envoyer un signal par tous les liens possibles. Au lieu de cela, nous pouvons trouver le meilleur chemin de la source à la destination qui donne le rapport signal sur bruit (SNR) de bout en bout le plus élevé. Nous pouvons minimiser la fonction objectif d’erreur quadratique moyenne (MSE) ou de taux d’erreur binaire (BER) en envoyant le signal utilisant le chemin sélectionné. L’ensemble de relais dans le chemin reste actif et le reste des relais s’éteint, ce qui permet d’économiser de l’énergie afin d’améliorer la durée de vie du réseau. Le meilleur chemin de transmission de signal a été étudié dans la littérature pour un relais MIMO à deux bonds mais est plus complexe pour un ...With the great developments in wireless communication technologies, Wireless Sensor Networks (WSNs) have gained attention worldwide in the past decade and are now being used in health monitoring, disaster management, defense, telecommunications, etc. Such networks are used in many industrial and consumer applications such as industrial process and environment monitoring, among others. A WSN network is a collection of specialized transducers known as sensor nodes with a communication link distributed randomly in any locations to monitor environmental parameters such as water level, and temperature. Each sensor node is equipped with a transducer, a signal processor, a power unit, and a transceiver. WSNs are now being widely used in the underground mining industry to monitor environmental parameters, including the amount of gas, water, temperature, humidity, oxygen level, dust, etc. The WSN for environment monitoring can be equivalently replaced by a multiple-input multiple-output (MIMO) relay network. Multi-hop relay networks have attracted significant research interest in recent years for their capability in increasing the coverage range. The network communication link from a source to a destination is implemented using the amplify-and-forward (AF) or decode-and-forward (DF) schemes. The AF relay receives information from the previous relay and simply amplifies the received signal and then forwards it to the next relay. On the other hand, the DF relay first decodes the received signal and then forwards it to the next relay in the second stage if it can perfectly decode the incoming signal. For analytical simplicity, in this thesis, we consider the AF relaying scheme and the results of this work can also be developed for the DF relay. The transceiver design for multi-hop MIMO relay is very challenging. This is because at the L-th relay stage, there are 2L possible channels. So, for a large scale network, it is not economical to send the signal through all possible links. Instead, we can find the best path from source-to-destination that gives the highest end-to-end signal-to-noise ratio (SNR). We can minimize the mean square error (MSE) or bit error rate (BER) objective function by sending the signal using the selected path. The set of relay in the path remains active and the rest of the relays are turned off which can save power to enhance network life-time. The best path signal transmission has been carried out in the literature for 2-hop MIMO relay and for multiple relaying it becomes very complex. In the first part of this thesis, we propose an optimal best path finding algorithm at perfect channel state information (CSI). We consider a parallel multi-hop multiple-input multiple-output (MIMO) AF relay system where a linear minimum mean-squared error (MMSE) receiver is used at the destination. We simplify the parallel network into equivalent series multi-hop MIMO relay link using best relaying, where the best relay ..

Joint Impact of Hardware Impairments and Imperfect Channel State Information on Multi-Relay Networks

In this paper, we investigate the performance of dual-hop (DH) decode-and-forward (DF) multi-relay networks, for which two practical deleterious factors are taken into account, namely hardware impairments (HIs) and imperfect channel state information (ICSI). The communication between the source and the destination is realized with the aid of DF multi-relays, where both hops are assumed to be independent but non-identically distributed α-μ fading. Aiming at improving the system performance, three representative relay selection strategies are considered, in which the best relay is selected according to the link quality of source-to-relay and/or relay-to-destination. To characterize the performance of the proposed strategies, two key performance metrics, namely outage probability (OP) and ergodic capacity (EC), are analyzed insightfully. We first derive closed-form expressions for both exact and asymptotic OPs. Utilizing the derived results, diversity orders achieved at the destinations are obtained. We demonstrate that the OPs of considered networks are limited by HIs and ICSI, and the diversity orders are zeros due to the presence of ICSI. Then, we study the ECs of the proposed relay selection schemes, and upper bounds for the EC and asymptotic expressions for the EC in the high signal-to-noise ratio (SNR) regime are derived. To obtain more insights, the affine expansions for the EC are involved by two metrics of high-SNR slope and highSNR power offset. It is shown that there are rate ceilings for the EC due to HIs and ICSI, which result in zero high-SNR slopes and finite high-SNR power offsets

A Study Of Cooperative Spectrum Sharing Schemes For Internet Of Things Systems

The Internet of Things (IoT) has gained much attention in recent years with the massive increase in the number of connected devices. Cognitive Machine-to-Machine (CM2M) communications is a hot research topic in which a cognitive dimension allows M2M networks to overcome the challenges of spectrum scarcity, interference, and green requirements. In this paper, we propose a Generalized Cooperative Spectrum Sharing (GCSS) scheme for M2M communication. Cooperation extends the coverage of wireless networks as well as increasing their throughput while reducing the energy consumption of the connected low power devices. We study the outage performance of the proposed GCSS scheme for M2M system and derive exact expressions for the outage probability. We also analyze the effect of varying transmission powers on the performance of the system

Performance analysis of multihop full-duplex NOMA systems with imperfect interference cancellation and near-field path-loss

Outage probability (OP) and potential throughput (PT) of multihop full-duplex (FD) nonorthogonal multiple access (NOMA) systems are addressed in the present paper. More precisely, two metrics are derived in the closed-form expressions under the impact of both imperfect successive interference cancellation (SIC) and imperfect self-interference cancellation. Moreover, to model short transmission distance from the transmit and receive antennae at relays, the near-field path-loss is taken into consideration. Additionally, the impact of the total transmit power on the performance of these metrics is rigorously derived. Furthermore, the mathematical framework of the baseline systems is provided too. Computer-based simulations via the Monte Carlo method are given to verify the accuracy of the proposed framework, confirm our findings, and highlight the benefits of the proposed systems compared with the baseline one.Web of Science231art. no. 52